journal article·2020-05

Improvement of Sn-3Ag-0.5Cu Soldered Joints Between Bi0.5Sb1.5Te3 Thermoelectric Material and a Cu Electrode

Tung-Han Chuang, Shih-Wen Hsu, Yan-Cheng Lin, Wei-Ting Yeh, Chun-Hao Chen, Pei-Ing Lee, Po-Ching Wu, Hao-Peng Cheng

Journal of Electronic Materials· Volume 49· Issue 5
Publisher page

Abstract

A Bi0.5Sb1.5Te3 thermoelectric (TE) element was directly soldered to a Cu electrode using Sn-3Ag-0.5 Cu alloy. The interface was sound and the bonding strength was satisfactory (8.6 MPa). However, the solder layer was exhausted quickly during high-temperature storage (HTS) tests at 150°C for 300 h and 600 h, and the bonding strength drastically decreased to 1.5 MPa. The consumption of the solder was prevented by electroplating a Ni barrier layer on the TE element, though a low bonding strength of 1.9 MPa resulted. Adding a Sn-rich thin film and a Ni barrier layer onto the Bi0.5Sb1.5Te3 element led to a high bonding strength of 12.1 MPa, which decreased only slightly after HTS reliability tests at 150°C for 1000 h. The sound interfaces of the Bi0.5Sb1.5Te3/Cu joints maintained their stability even after HTS at 175°C for 1000 h.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Thermoelectric Materials and Devices · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. R. Zybala, K.T. Wojciechowski, M. Schmidt, and R. Mania, Mater. Ceram. 62, 481 (2010).
2. W. Xie, X. Tang, Y. Yan, Q. Zhang, and T.M. Tritt, Appl. Phys. Lett. 94, 102 (2009).
3. C.H. Chuang, Y.C. Lin, and C.W. Lin, Metals 6, 92 (2016).10.3390/met6040092 ↗
4. T.H. Chuang, H.J. Lin, C.H. Chuang, W.T. Yeh, J.D. Hwang, and H.S. Chu, J. Electron. Mater. 43, 4610 (2014).10.1007/s11664-014-3430-9 ↗
5. Y.C. Lin, K.T. Lee, J.D. Hwang, H.S. Chu, C.C. Hsu, S.C. Chen, and T.H. Chuang, J. Electron. Mater. 45, 4935 (2016).10.1007/s11664-016-4645-8 ↗
6. L.W. Chen, C. Wang, Y.C. Liao, C.L. Li, T.H. Chuang, and C.H. Hsueh, J. Alloys Compd. 762, 631 (2018).10.1016/j.jallcom.2018.05.251 ↗
7. R.R. Tummala and E.J. Rymaszewski, Microelectronics Packaging Handbook (New York: Van Nostrand Reinhold, 1989), pp. 80–81.
8. G. Elger, M. Hutter, H. Oppermann, R. Aschenbrenner, H. Reichl, and E. Jager, Microsyst. Technol. 7, 239 (2002).10.1007/s005420100103 ↗
9. F. Hillen, D. Pickart-Castillo, and J. Rass, Weld. Cut. 52, E162 (2000).
10. H. Zhang, H.Y. Jing, Y.D. Han, L.Y. Xu, and G.-Q. Lu, J. Alloys Compd. 576, 424 (2013).10.1016/j.jallcom.2013.05.129 ↗
11. K. Zeng and K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
12. P.Y. Chien, C.H. Yeh, H.H. Hsu, and A.T. Wu, J. Electron. Mater. 43, 284 (2014).10.1007/s11664-013-2877-4 ↗
13. R.J. Fields, S.R. Low III, and G.K. Lecey, Jr., Metal science of joining, in Proceedings of TMS Symposium, Cincinnati, USA, Oct 20–24, 1991.
14. S.W. Chen and C.N. Chiu, Scripta Mater. 56, 97 (2007).10.1016/j.scriptamat.2006.09.018 ↗
15. C.N. Chiu, C.H. Wang, and S.W. Chen, J. Electron. Mater. 37, 40 (2007).10.1007/s11664-007-0264-8 ↗
16. T.H. Chuang, H.M. Wu, M.D. Cheng, S.Y. Chang, and S.F. Yen, J. Electron. Mater. 33, 22 (2004).10.1007/s11664-004-0289-1 ↗
17. W.P. Lin, D.E. Wesolowski, and C.C. Lee, J. Mater. Sci. Mater. Electron. 22, 1313 (2011).10.1007/s10854-011-0306-0 ↗
18. C.L. Yang, H.J. Lai, J.D. Hwang, and T.H. Chuang, J. Mater. Eng. Perform. 22, 2029 (2013).10.1007/s11665-013-0487-1 ↗
19. Y.C. Lin, C.L. Yang, J.Y. Huang, C.C. Jain, J.D. Hwang, H.S. Chu, S.C. Chen, and T.H. Chuang, Metall. Mater. Trans. 47A, 4767 (2016).10.1007/s11661-016-3641-1 ↗