journal article·2018-01

Indentation Size Effect on Ag Nanoparticle-Modified Graphene/Sn-Ag-Cu Solders

L. Y. Xu, S. T. Zhang, H. Y. Jing, L. X. Wang, J. Wei, X. C. Kong, Y. D. Han

Journal of Electronic Materials· Volume 47· Issue 1
Publisher page

Abstract

This paper presents the results for the indentation size effect (ISE) on the creep stress exponent and hardness of 0.03 wt.% Ag-modified graphene nanosheet Sn-Ag-Cu solder alloys, using constant loading/holding and multi-cycle (CMC) loading methods, respectively. At each maximum load, with increasing indentation depth, the creep exponent first decreased and then increased. At the same strain rate, the stress exponent also showed the same tendency, increasing as the indentation depth (peak load) increased and then decreased. The hardness was measured continuously with increasing indentation depth by the CMC loading method. The hardness did not exhibit a decrease as the indentation depth increased, which differs from the classical description of the ISE. After an initial decrease, the hardness then increased and finally decreased as the indentation depth increased. This study reviews the existing theories and formulations describing ISE with hardening effects. The experimental results fit well with the empirical formulation. The phenomenon of ISE accompanied by hardening effects has been explained physically via the interaction between geometrically necessary dislocations and grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. S. Xu, X. Hu, Y. Yang, Z. Chen, and Y.C. Chan, J. Mater. Sci. 25, 2682 (2014).
2. D.B. Miracle, Compos. Sci. Tecnol. 65, 2526 (2005).10.1016/j.compscitech.2005.05.027 ↗
3. L. Xu, X. Chen, H. Jing, L. Wang, J. Wei, and Y. Han, Mater. Sci. Eng. A 667, 87 (2016).10.1016/j.msea.2016.04.084 ↗
4. H.Y. Jing, H.J. Guo, L.X. Wang, J. Wei, L.Y. Xu, and Y.D. Han, J. Alloys Compd. 702, 669 (2017).10.1016/j.jallcom.2017.01.286 ↗
5. E.C. Aifantis, Mech. Mater. 35, 259 (2003).10.1016/S0167-6636(02)00278-8 ↗
6. Z.L. Liu, Z. Zhuang, X.M. Liu, X.C. Zhao, and Z.H. Zhang, Int. J. Plast. 27, 201 (2011).10.1016/j.ijplas.2010.04.004 ↗
7. Y. Liu, S. Varghese, J. Ma, M. Yoshino, and H. Lu, Int. J. Plast. 24, 1990 (2008).10.1016/j.ijplas.2008.02.009 ↗
8. W. Nix and H. Gao, J. Mech. Phys. Solids 46, 411 (1998).10.1016/S0022-5096(97)00086-0 ↗
9. J. Swadener, E. George, and G. Pharr, J. Mech. Phys. Solids 50, 681 (2002).10.1016/S0022-5096(01)00103-X ↗
10. G. Feng and W.D. Nix, Scr. Mater. 51, 599 (2004).10.1016/j.scriptamat.2004.05.034 ↗
11. A.H. Almasri and G.Z. Voyiadjis, Acta Mech. 209, 1 (2010).10.1007/s00707-009-0151-x ↗
12. M. Delincé, P.J. Jacques, and T. Pardoen, Acta Mater. 54, 3395 (2006).10.1016/j.actamat.2006.03.031 ↗
13. Y. Wang, W. Liu, Y. Ma, Y. Huang, Y. Tang, and F. Cheng, Mater. Lett. 120, 151 (2014).10.1016/j.matlet.2014.03.064 ↗
14. N. Janakiraman and F. Aldinger, J. Am. Ceram. Soc. 93, 821 (2010).10.1111/j.1551-2916.2009.03491.x ↗
15. Z.H. Cao, P.Y. Li, and X.K. Meng, Mater. Sci. Eng. A 516, 253 (2009).10.1016/j.msea.2009.03.019 ↗
16. Y.D. Han, H.Y. Jing, S. Nai, L.Y. Xu and C.M. Tan, J. Mater. Sci. Mater. Electron. 23, 1108 (2012).10.1007/s10854-011-0557-9 ↗
17. R. Goodall and T.W. Clyne, Acta Mater. 54, 5489 (2006).10.1016/j.actamat.2006.07.020 ↗
18. V.M.F. Marques, C. Johnston, and P.S. Grant, Acta Mater. 61, 2460 (2013).10.1016/j.actamat.2013.01.019 ↗
19. W.C. Oliver and G.M. Pharr, J. Mater. Res. 19, 3 (2014).10.1557/jmr.2004.19.1.3 ↗
20. J. Rawers, D. Govier, and D. Cook, Scr. Metall. Mater. 32, 1319 (1995).10.1016/0956-716X(95)00164-Q ↗
21. T.G. Langdon, Metall. Mater. Trans. 33A, 249 (2002).10.1007/s11661-002-0087-4 ↗
22. Y.D. Han, H.Y. Jing, S.M.L. Nai, C.M. Tan, J. Wei, L.Y. Xu, and S.R. Zhang, J. Phys. D Appl. Phys. 42, 125411 (2009).10.1088/0022-3727/42/12/125411 ↗
23. P. Huang, F. Wang, M. Xu, K.W. Xu, and T.J. Lu, Acta Mater. 58, 5196 (2010).10.1016/j.actamat.2010.05.055 ↗
24. G.Z. Voyiadjis and R.K.A. Al-Rub, Int. J. Solids Struct. 42, 3998 (2005).10.1016/j.ijsolstr.2004.12.010 ↗
25. R.K. Abu Al-Rub and G.Z. Voyiadjis, Int. J. Plast. 20, 1139 (2004).10.1016/j.ijplas.2003.10.007 ↗
26. B. Yang and H. Vehoff, Acta Mater. 55, 849 (2007).10.1016/j.actamat.2006.09.004 ↗
27. G.Z. Voyiadjis and R. Peters, Acta Mech. 211, 131 (2010).10.1007/s00707-009-0222-z ↗