Synthesis of Ferrite Nickel Nano-particles and Its Role as a p-Dopant in the Improvement of Hole Injection of an Organic Light-Emitting Diode
Source abstract
Abstract
We fabricated an organometallic complex based on zinc ions using zinc complex as a fluorescent in organic light-emitting diodes (OLEDs). Also, the nano-particles of ferrite nickel were produced in a simple aqueous system prepared by mixing Ni (NO3)2, Fe (NO3)3 and deionized water solutions. The synthesized zinc bis (8-hydroxyquinoline) (Znq2) complex and NiFe2O4 nano-particles were characterized by using x-ray diffraction (XRD), ultraviolet–visible (UV–Vis), Fourier transform infrared spectroscopy (FT-IR) as well as photoluminescence spectroscopy analysis. Their energy level was also determined by some cyclic voltammetry (CV) measurements. The maximum green photoluminescence was observed at 565 nm. The nano-particles of ferrite nickel were utilized in preparation of OLEDs by blending of the magnetic nano-particles with PEDOT:PSS and Zn-complex solutions. The electrical and optical performance of prepared OLEDs with/without doped nano-particle was studied. The samples were configured into two structures: (1) Indium Tin Oxide (ITO)/ poly(3,4-ethylenedi-oxythiophene):poly(styrenesulfonate) (PEDOT:PSS)/Znq2/(2-4-biphenylyl)-5-phenyl-oxadiazole (PBD)/aluminum (Al) and (2) ITO/PEDOT:PSS:NiFe2O4(NPs)/Znq2/PBD/Al. Obtained results showed that the current density and electroluminescence efficiency were increased and the turn-on voltage decreased (about 3 V) by using nano-particles into a PEDOT:PSS layer (Hole transport layer). Also, the electroluminescence efficiency was decreased by incorporating magnetic nano-particles into a Zn-complex layer (emissive layer). It was found that utilizing NiFe2O4 nano-particles caused an increase of hole-injection layer conductivity effectively and a decrease of the turn-on voltage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Organic Light-Emitting Diodes Research · Magnetic Properties and Synthesis of Ferrites · Electromagnetic wave absorption materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. Y. Li, A. Rizzo, R. Cingolani, and G. Gigli, Adv. Mater. 18, 2545 (2006).10.1002/adma.200600181 ↗
2. S. Haque, S. Koops, N. Tokmoldin, J. Durrant, J. Huang, D. Bradley, and E. Palomares, Adv. Mater. 19, 683 (2007).10.1002/adma.200601619 ↗
3. P.L. Taberna, S. Mitra, P. Poizot, P. Simon, and J.M. Tarascon, Nat. Mater. 5, 567 (2006).10.1038/nmat1672 ↗
4. R. Shi, X. Liu, G. Gao, R. Yi, and G. Qiu, Alloys Compd. 485, 548 (2009).10.1016/j.jallcom.2009.06.024 ↗
5. L.M. Bronstein, X. Huang, J. Retrum, A. Schmucker, M. Pink, B.D. Stein, and B. Dragnea, Chem. Mater. 19, 3624 (2007).10.1021/cm062948j ↗
6. M. Younas, M. Nadeem, M. Atif, and R. Grossinger, J. Appl. Phys. 109, 093704 (2011).10.1063/1.3582142 ↗
7. P. Sivakumar, R. Ramesh, A. Ramanand, S. Ponnusamy, and C. Muthamizhchelvan, J. Alloys Compd. 563, 6 (2013).10.1016/j.jallcom.2013.02.077 ↗
8. J. Kalinowski, M. Cocchi, D. Virgili, P. Di Marco, and V. Fattori, Chem. Phys. Lett. 380, 710 (2003).10.1016/j.cplett.2003.09.086 ↗
9. J.A. Gomez, F. NÄuesch, L. Zuppiroli, and C.F.O. Graeff, Synth. Met. 160, 317 (2010).10.1016/j.synthmet.2009.11.020 ↗
10. T.D. Nguyen, Y. Sheng, J. Rybicki, G. Veeraraghavan, and M. Wohlgenannt, Mater. Chem. 17, 2001 (1995).
11. B.F. Ding, Y. Yao, Z.Y. Sun, C.Q. Wu, X.D. Gao, Z.J. Wang, X.M. Ding, W.C.H. Choy, and X.Y. Hou, Appl. Phys. Lett. 97, 163302 (2010).10.1063/1.3505343 ↗
12. T. Shimada, Organic Light Emitting Diode---Material, Process, and Devices, chap. 12 (InTech, 2011), pp. 311–322.
13. Y. Ohmori, H. Kajii, T. Sawatani, H. Ueta, and K. Yoshino, Thin Solid Films 393, 407 (2001).10.1016/S0040-6090(01)01128-2 ↗
14. J.G. Mahakhode, B.M. Bahirwar, S.J. Dhoble, and S.V. Moharil, J. Proc. of ASID, New Delhi, pp. 237–239 (2006).
15. M. Brinkmann, G. Gadret, M. Muccini, C. Taliani, N. Masciocchi, and A. Sironi, J. Am. Chem. Soc. 122, 5147 (2000).10.1021/ja993608k ↗
16. M. Colle, J. Gmeiner, W. Milius, H. Hillebrecht, and W. Brutting, Adv. Funct. Mater. 13, 108 (2003).10.1002/adfm.200390015 ↗
17. A.I. Vogel, Text book of Quantitative Chemical Analysis, 5th ed. (New York: Longman, 1989).
18. R. Suresh, P. Moganavally, and M. Deepa, Int. J. Chem. Tech. Res. 8, 113 (2015).
19. A. Pradeep and G. Chandrasekaran, Mater. Lett. 60, 371 (2006).10.1016/j.matlet.2005.08.053 ↗
20. N.J. Shirtcliffe, S. Thompson, E.S. O’Keefe, S. Appleton, and C.C. Perry, Mater. Res. Bull. 42, 281 (2007).10.1016/j.materresbull.2006.06.001 ↗
21. M.R. Jafari, M. Janghouri, and Z. Shahedi, J. Electron. Mater. 46, 544 (2017).10.1007/s11664-016-4901-y ↗
22. M. Janghouri, E. Mohajerani, M.M. Amini, E. Najafi, and H. Hosseini, J. Electron. Mater. 42, 2915 (2013).10.1007/s11664-013-2694-9 ↗
23. X. Bing-she, H. Yu-ying, W. Hua, Z. He-feng, L. Xuguang, and C. Ming-wei, Solid State Commun. 136, 318 (2005).10.1016/j.ssc.2005.08.021 ↗
24. X. Wang, M. Shao, and L. Liu, Synth. Methods 160, 718 (2010).10.1016/j.synthmet.2010.01.008 ↗
25. X.B. Chen, Z. Gong, B.Ch. Zhou, X.W. Hu, Ch.J. Mao, J.M. Song, H.-L. Niu, and S.-Y. Zhang, Mater. Lett. 75, 155 (2012).10.1016/j.matlet.2012.02.022 ↗
26. L.S. Sapochak, F.E. Benincasa, R.S. Schofield, J.L. Baker, K.K.C. Riccio, D. Fogarty, H. Kohlmann, K.F. Ferris, and P.E. Burrows, J. Am. Chem. Soc. 124, 6119 (2002).10.1021/ja0201909 ↗
27. T.A. Hopkins, K. Meerholz, S. Shaheen, M.L. Anderson, A. Schmidt, B. Kippelen, A.B. Padias, J.H.K. Hall, N. Peyghambarian, and N.R. Armstrong, Chem. Mater. 8, 344 (1996).10.1021/cm9503442 ↗
28. M.M. El-Nahass, A.M. Farid, and A.A. Atta, J. Alloys Compds. 507, 112 (2010).10.1016/j.jallcom.2010.07.110 ↗
29. Y. Kai, M. Moraita, N. Yasuka, and N. Kasai, Bull. Chem. Soc. Jpn 58, 1631 (1985).10.1246/bcsj.58.1631 ↗
30. J.P. Phillips and J.F. Deye, Anal. Chim. Acta 17, 231 (1957).10.1016/S0003-2670(00)87019-1 ↗
31. T. Gavrilko, R. Fedorovich, G. Dovbeshko, A. Marchenko, A. Naumovets, V. Nechytaylo, G. Puchkovska, L. Viduta, J. Baran, and H.J. Ratajczak, Mol. Struct. 704, 163 (2004).10.1016/j.molstruc.2004.01.068 ↗
32. J.E. Tackett and D.T. Sawyer, Inorg. Chem. 3, 692 (1964).10.1021/ic50015a021 ↗
33. C. Engelter, G.E. Jackson, C.L. Knight, and D.A. Thornton, J. Mol. Struct. 213, 133 (1983).10.1016/0022-2860(89)85112-9 ↗
34. M. Braun, J. Gmeiner, M. Tzolov, M. Coelle, F.D. Meyer, W. Milius, H. Hillebrecht, O. Wendland, J.U. von Schűtz, and W. Brűtting, Chem. Phys. 114, 9625 (2001).
35. Y.K. Han and S.U. Lee, Chem. Phys. Lett. 366, 9 (2002).10.1016/S0009-2614(02)01460-4 ↗
36. A. Curioni and W. Andreoni, IBM J. Res. Dev. 45, 101 (2001).10.1147/rd.451.0101 ↗
37. M.M. Levichkova, J.J. Assa, H. Fröb, and K. Leo, Appl. Phys. Lett. 88, 201912 (2006).10.1063/1.2203966 ↗
38. K. Singh, A. Kumar, R. Srivastava, P.S. Kadyan, and M.N. Kamalasanan, Opt. Mater. 34, 221 (2011).10.1016/j.optmat.2011.08.014 ↗
39. R.S. Ashraf, M. Shahid, E. Klemm, M. Al-Ibrahim, and S. Sensfuss, Macromol. Rapid Commun. 27, 145401 (2006).10.1002/marc.200600314 ↗
40. B.K. Pal and D.E. Ryan, Anal. Chim. Acta 47, 35 (1969).10.1016/S0003-2670(01)81802-X ↗
41. K. Soroka, R.S. Vithanage, D.A. Phillips, B. Walker, and P.K. Dasgupta, Anal. Chem. 59, 629 (1967).10.1021/ac00131a019 ↗
42. C. Chen and J.M. Shi, Coord. Chem. Rev. 171, 161 (1998).10.1016/S0010-8545(98)90027-3 ↗