Measurement of Sn and In Solidification Undercooling and Lattice Expansion Using In Situ X-Ray Diffraction
Source abstract
Abstract
The solidification behavior of two low-melting-point metals, Sn and In, on three substrates has been examined using in situ x-ray diffraction. Undercoolings of up to 56.1°C were observed for Sn solidified on graphite, which is a nonwetting substrate, while lower undercoolings were observed for Sn on Au/Ni/Cu (17.3°C) and on Cu (10.5°C). Indium behaved quite differently, showing undercoolings of less than 4°C on all three substrates. The lattice expansion/contraction behavior of Sn, In, and intermetallic compounds (IMCs) that formed during the reaction of Sn with Au/Ni/Cu surfaces were also measured during heating and cooling. Results showed anisotropic and nonlinear expansion of both Sn and In, with a contraction, rather than expansion, of the basal planes of In during heating. The principal IMC that formed between Sn and the Au/Ni/Cu surface was characterized as Cu 6 Sn 5 , having an average expansion coefficient of 13.6 × 10 −6 /°C, which is less than that of Sn or Cu.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Solidification and crystal growth phenomena · Metallurgical and Alloy Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. K.J. Puttlitz and K.A. Stalter, Handbook of Lead-Free Solder Technology for Microelectronic Assemblies (New York: CRC Press, 2004).10.1201/9780203021484 ↗
2. D. Swenson, J. Mater. Sci.: Mater. Electron. 18, 39 (2007).
3. J.H. Perepezko, Mater. Sci. Eng. 65, 125 (1984).10.1016/0025-5416(84)90206-4 ↗
4. R. Kinyanjui, L.P. Lehman, L. Zavalij, and E. Cotts, J. Mater. Res. 20, 2914 (2009).10.1557/JMR.2005.0361 ↗
5. Y.-C. Huang, S.-W. Chen, and K.-S. Wu, J. Electron. Mater. 39, 109 (2010).10.1007/s11664-009-0966-1 ↗
6. A. LaLonde, D. Emelander, J. Jeannette, C. Larson, W. Rietz, D. Swensen, and D.W. Henderson, J. Electron. Mater. 33, 1545 (2004).10.1007/s11664-004-0096-8 ↗
7. S.-K. Seo, S.K. Kang, M.G. Ko, D. Dhih, and H.M. Lee, J. Electron. Mater. 38, 2461 (2009).10.1007/s11664-009-0902-4 ↗
8. A.U. Telang, T.R. Bieler, J.P. Lucas, K.N. Subramanian, L.P. Lehman, Y. Xing, and E.J. Cotts, J. Electron. Mater. 33, 1412 (2004).10.1007/s11664-004-0081-2 ↗
9. L.P. Lehman, S.N. Athavale, T.Z. Fullem, A.C. Giamis, R.K. Kinyanjui, M. Lowenstein, K. Mather, R. Patel, D. Rae, J. Wang, Y. Xing, L. Zavalij, P. Borgesen, and E.J. Cotts, J. Electron. Mater. 33, 1429 (2004).10.1007/s11664-004-0083-0 ↗
10. D.W. Henderson, J.J. Woods, T. Goselin, A. Sarkhel, S.K. Kang, W.-K. Choi, D.-.Y. Shih, C. Goldsmith, and K.J. Puttlitz, J. Mater. Res. 9, 1608 (2004).10.1557/JMR.2004.0222 ↗
11. K.N. Subramanian and J.G. Lee, J. Mater. Sci.: Mater. Electron. 15, 235 (2004).
12. T.R. Bieler, H. Jiang, L.P. Lehman, T. Kirkpatrick, and E.J. Cotts, Proceedings of the 56th ECTC (2006), p. 1462.
13. L.P. Lehman, Y. Xing, T.R. Bieler, and E.J. Cotts, Acta Mater. V58, 3546 (2010).10.1016/j.actamat.2010.01.030 ↗
14. I.E. Anderson, J.W. Walleser, J.L. Harringa, F. Labs, and A. Kracher, J. Electron. Mater. 38, 2770 (2009).10.1007/s11664-009-0936-7 ↗
15. T. Massalski, H. Okamoto, P.R. Subramanian, and L. Kacprzak, Binary Alloy Phase Diagrams, 2nd ed., Vol. 2 (Materials Park, Ohio: ASM International, 1990).
16. P. Villars, Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, desk ed., Vol. 2 (Materials Park, Ohio: ASM International, 1997).
17. K.-J. Wang, Y.-C. Lin, J.-G. Duha, C.-Y. Cheng, and J.-J. Lee, J. Mater. Res. 25, 972 (2010).10.1557/JMR.2010.0130 ↗
18. G.J. Jackson, H. Lu, R. Durairaj, N. Hoo, C. Bailey, N.N. Ekere, and J. Wright, J. Electron. Mater. 33, 1524 (2004).10.1007/s11664-004-0094-x ↗
19. MUCAL program ( http://www.csrri.iit.edu/mucal.html ) based on data from: W.H. McMaster, N.K. Del Grande, J.H. Mallett, and J.H. Hubbell, Lawrence Livermore National Laboratory Report UCRL-50174 (section I 1970, section II 1969, section III 1969 and section IV, 1969).
20. J.W. Elmer, T.A. Palmer, and E.D. Specht, Metall. Mater. Trans. A 38A, 464 (2007).10.1007/s11661-006-9076-3 ↗
21. J.W. Elmer, T.A. Palmer, S.S. Babu, and E.D. Specht, Mater. Sci. Eng. A V391, 104 (2005).10.1016/j.msea.2004.08.084 ↗
22. J.W. Elmer, T.A. Palmer, S.S. Babu, and E.D. Specht, Scripta Mater. 52, 1051 (2005).10.1016/j.scriptamat.2005.01.021 ↗
23. J.W. Elmer, T.A. Palmer, and E.D. Specht, J. Vac. Sci. Technol. A 24, 978 (2006).10.1116/1.2204926 ↗
24. J.W. Elmer, E.D. Specht, and M. Kumar, J. Electron. Mater. 39, 273 (2010).10.1007/s11664-010-1080-0 ↗
25. P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch, and D. Häusermann, High Press. Res. 14, 235 (1996).10.1080/08957959608201408 ↗
26. Gangulee, G.C. Das, and M.B. Bever, Metall. Trans. 4, 2063 (1973).10.1007/BF02643268 ↗
27. J.P. Jan, W.B. Pearson, A. Kjekshus, and S.B. Woods, Can. J. Phys. 41, 2252 (1963).10.1139/p63-217 ↗
28. V.T. Deshpande and D.B. Sirdeshmuk, Acta Cryst. 15, 294 (1962).10.1107/S0365110X62000742 ↗
29. V.T. Deshpande and R.R. Pawar, Acta Cryst. 25, 415 (1969).10.1107/S0567739469000830 ↗