Process optimization to overcome void formation in nonconductive paste interconnections for fine-pitch applications
Source abstract
Abstract
Nonconductive paste (NCP) is becoming an alternative material for chip-on-flexible (COF) substrate, where it is able to achieve a very fine-pitch interconnection for high resolution products. The application of NCP faces the problem that it is initially a high viscosity liquid, which easily causes voids in the inter-connection. Voids in the interconnection reduce the mechanical strength in the joints and create moisture entrapment sites, which shorten the reliable performance of the interconnection. They were revealed using optical microscopy and nondestructive C-mode scanning acoustic microscopy (C-SAM). This study reveals the factors involved during process control in order to minimize void entrapment in the interconnection. These parameters include the following: (a) substrate pretreatment, (b) the speed at which the tool heater descends, (c) bonding force, (d) bonding temperature, and (e) holding time on the bonding stage. These parameters permitted a modification to the surface, and also brought chemical reaction and viscosity changes to the NCP during the bonding process, which leads to the minimization of void formation in the specimen.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites · Epoxy Resin Curing Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. K.Y. Phaik and M.J. Yim, EMAP, Int. Symp. (Hong Kong: EMAP, 2000), pp. 282–288.
2. I. Watanabe, T. Fujinawa, M. Arifuku, K. Kobayashi, and Y. Gotoh, AGEC, Proc. 2004 Int. IEEE Conf. (Shenzhen: AGEC, 2004), pp. 229–234.
3. H. Kristiansen and J. Liu, IEEE Trans. Components, Packaging, and Manufacturing-Part A 21, 208 (1998).10.1109/95.705466 ↗
4. http://www.dscc.dla.mil/Programs/MilSpec/listdocs.asp? BasicDoc=MIL-STD-883
5. Horizontal Signal Technology, http://www.horizonsignal.com/speeddisplay.asp (2003).
6. Y.E. Huang, D. Hagen, G. Dody, and T. Burnette, 23rd IEEE/CPMT Conf. Proc. (Piscataway, NJ: IEEE, 1998), pp. 105–111.
7. Y. Ohshima, T. Nakazawa, K. Doi, H. Aoki, and Y. Hiruta, Reliability Physics Symp., 1997 35th Annual Proc. pp. 124–128.
8. C.W. Chong, T.F. Guo, and L. Cheng, Comp Mater. Sci. 30, 425 (2004).10.1016/j.commatsci.2004.02.036 ↗
9. T.F. Guo and L. Cheng, Acta Mater. 50, 3487 (2002).10.1016/S1359-6454(02)00162-3 ↗
10. J.E. Galloway and B.M. Miles, IEEE Trans. Components, Packaging, Manufacturing Technol. 20, 274 (1997).10.1109/95.623021 ↗
11. T.F. Guo and L. Cheng, J. Mech. Phys. Solids 51, 993 (2003).10.1016/S0022-5096(03)00007-3 ↗
12. M.R. Kamal and S. Sourour, Polymer Eng. Sci. 13, 59 (1973).10.1002/pen.760130110 ↗
13. E. Petri, http://www.specialchem4adhesives.com/home/editorial.aspx?id=149 (2002).
14. Solid Surface Energies, Accudynetest Diversifies Enterprises, http://www.accudynetest.com/surface_energy_materials.html (2003),
15. B. Ellis, Chemistry and Technology of Epoxy Resins (UK: Blackie Academic & Professional, 1993), pp. 212–213.10.1007/978-94-011-2932-9 ↗
16. R.K. Gupta, Polymer and Composite Rheology (New York: Marcel Dekker, Inc., 2000), p. 35.10.1201/9781482273700 ↗