Textural and microstructural transformation of Cu damascene interconnects after annealing
Source abstract
Abstract
Influence of annealing on the textural and microstructural transformation of Cu interconnects having various line widths is investigated. Two types of annealing steps have been considered here: room temperature over 6 months and 200°C for 10 min. The texture was determined by x-ray diffraction (XRD) of various cross-sectional profiles after electropolishing, and the surface, microstructure, and grain boundary character distribution (GBCD) of Cu interconnects were characterized using electron backscattered diffraction (EBSD) techniques. In order to analyze a relationship between the stress distribution and textural evolution in the samples, microstresses were calculated with decreasing line widths at 200°C using finite element modeling (FEM). In this investigation, it was found that the inhomogeneity of stress distribution in Cu interconnects is an important factor, which is necessary for understanding textural transformation after annealing. A new interpretation of textural evolution in damascene interconnects lines after annealing is suggested, based on the state of stress and the growth mechanisms of Cu electrodeposits.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electronic Packaging and Soldering Technologies · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. P. Singer, Semicond. Int. 21, 91 (1998).
2. C. Ryu, K.-W. Kwon, A. Loke, V. Oabin, R. Kavari, G. Ray, and S. Wong, Digest IEEE 1998 Symp. VLSI Technology, pp. 156–157, Honolulu, Hawaii, June 1998.
3. L. Vanasupa, Y.-C. Joo, P.R. Besser, and S. Pramanick, J. Appl. Phys. 85, 2583 (1999).10.1063/1.369624 ↗
4. D.P. Field, J.E. Sanchez, Jr., P.R. Besser, and D.J. Dingley, J. Appl. Phys. 82, 2383 (1997).10.1063/1.365763 ↗
5. J.L. Hurd, K.P. Rodbell, L.M. Gignac, L.A. Clevenger, R.C. Iggulden, R.F. Schnabel, S.J. Weber, and N.H. Schmidt, Appl. Phys. Lett. 72, 326 (1998).10.1063/1.120726 ↗
6. K.T. Lee, J.A. Szpunar, A. Morawiec, D.B. Knorr, and K.P. Rodbell, Can. Metall. Q. 34, 287 (1995).10.1179/cmq.1995.34.3.287 ↗
7. R. Rosenberg, D.C. Edelstein, C.-K. Hu, and K.P. Rodbell, Ann. Rev. Mater. Sci. 30, 229 (2000).10.1146/annurev.matsci.30.1.229 ↗
8. J.M.E. Harper and K.P. Rodbell, J. Vac. Sci. Technol. B 15, 763 (1997).10.1116/1.589407 ↗
9. C. Lingk, M.E. Gross, W.L. Brown, and R. Drese, Solid State Technol. 42, 47 (1999).
10. S.P. Riege and C.V. Thompson, Scripta Mater. 41, 403 (1999).10.1016/S1359-6462(99)00098-6 ↗
11. M.T. Perez-Prado and J.J. Vlassak, Scripta Mater. 47, 817 (2002).10.1016/S1359-6462(02)00308-1 ↗
12. H. Li, TexTools, ver.3.2. (Resmat 2000).
13. FEBLAB, ver. 2.3b. (The COMSOL Group).
14. V. Randle, The Role of the Coincidence Site Lattice in Grain Boundary Engineering, 1st ed. (London: The Institute of Materials, 1996), pp. 96–102.
15. D.N. Lee and H.J. Lee, J. Electron. Mater. 32, 1012 (2003).10.1007/s11664-003-0083-5 ↗
16. D.N. Lee, Scripta Metall. Mater. 32, 1689 (1995).10.1016/0956-716X(95)00256-U ↗
17. D.N. Lee, Int. J. Mech. Sci. 42, 1645 (2000).10.1016/S0020-7403(99)00095-8 ↗
18. D. Josell, D. Wheeler, W.H. Huber, and T.P. Moffat, Phys. Rev. Lett. 87, 016102 (2001).10.1103/PhysRevLett.87.016102 ↗
19. P.C. Andricacos, C. Uzoh, J.O. Dukovic, J. Horkans, and H. Deligianni, IBM J. Res. Development 42, 567 (1998).10.1147/rd.425.0567 ↗
20. C. Lingk, M.E. Gross, and W.L. Brown, Appl. Phys. Lett., 74, 682 (1999).10.1063/1.122986 ↗
21. L. Vanasupa, D. Pinck, Y.-C. Joo, T. Nogami, S. Pramanick, S. Lopatin, and K. Yang, Electrochem. Solid State Lett. 2, 275 (1999).10.1149/1.1390809 ↗
22. E. Zschech, W. Blum, I. Zienert, and P.R. Besser, Z. Metallkd. 92, 803 (2001).
23. P.R. Besser, E. Zschech, W. Blum, D. Winter, R. Ortega, S. Rose, M. Herrick, M. Gall, S. Thrasher, M. Tiner, B. Baker, G. Braeckelmann, L. Zhao, C. Simpson, C. Capasso, H. Kawasaki, and E. Weitzman, J. Electron. Mater. 30, 320 (2001).10.1007/s11664-001-0038-7 ↗