Nanostructured CoSi Obtained by Spark Plasma Sintering
Source abstract
Abstract
Cobalt monosilicide is a cheap, environmentally friendly thermoelectric material for medium temperatures (200–700°C). While its power factor is similar to the state-of-the-art thermoelectric materials, its thermal conductivity is too large to reach high ZT values. Nanostructuring might be an interesting strategy to reduce the phonon mean free path thereby improving the thermoelectric performance. In this paper, we report on a 35% reduction of the thermal conductivity of n-type CoSi by a nanostructuring approach. CoSi nanostructured powders were synthesized by arc melting, followed by 4 h mechanical milling. By optimizing the spark plasma sintering thermal and pressure cycle, pellets with 5–10% porosity were obtained. During sintering, a small amount of Co2Si extra phase appeared and grains coarsened. After sintering, the pellets remained nanostructured, with an averaged grain size of 70 nm. The reduction of thermal conductivity is ascribed to a decrease in both the electronic and lattice contributions. The former is directly related to a decrease in the electrical conductivity, which appears to be the limiting factor preventing nanostructured CoSi from reaching enhanced thermoelectric performances.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Semiconductor materials and interfaces · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A. Patyk, J. Electron. Mater. 39, 2023 (2010).10.1007/s11664-009-1013-y ↗
2. M.I. Fedorov and V.K. Zaitsev, Thermoelectrics Handbook. Macro to Nano, ed. D.M. Rowe (Boca Raton, FL: CRC Press, 2005), p. 31.1.10.1201/9781420038903.ch31 ↗
3. G.T. Alekseeva, V.K. Zaitsev, A.V. Petrov, V.I. Tarasov, and M.I. Fedorov, Fiz. Tverd. Tela 23, 2888 (1981).
4. E.N. Nikitin, P.V. Tamarin, and V.I. Tarasov, Phys. Solid State 11, 2002 (1970).
5. N. Satyala and D. Vashaee, Appl. Phys. Lett. 100, 073107 (2012).10.1063/1.3684615 ↗
6. S.K. Bux, R.G. Blair, P.K. Gogna, H. Lee, G. Chen, M.S. Dresselhaus, R.B. Kaner, and J.-P. Fleurial, Adv. Funct. Mater. 19, 2445 (2009).10.1002/adfm.200900250 ↗
7. S. Karuppaiah, M. Beaudhuin, and R. Viennois, J. Solid State Chem. 199, 90 (2013).10.1016/j.jssc.2012.12.004 ↗
8. W.H. Luo, H. Li, Y.G. Yan, Z.B. Lin, X.F. Tang, Q.J. Zhang, and C. Uher, Intermetallics 19, 404 (2011).10.1016/j.intermet.2010.11.008 ↗
9. M. Longhin, R. Viennois, D. Ravot, J.-J. Robin, and P. Papet, Solid State Sci. 38, 129 (2014).10.1016/j.solidstatesciences.2014.10.011 ↗
10. R. Orru, R. Licheri, A.M. Locci, A. Cincotti, and G.C. Cao, Mater. Sci. Eng. R-Rep. 63, 127 (2009).10.1016/j.mser.2008.09.003 ↗
11. Z.A. Munir, U. Anselmi-Tamburini, and M. Ohyanagi, J. Mater. Sci. 41, 763 (2006).10.1007/s10853-006-6555-2 ↗
12. G.K. Williamson and W.H. Hall, Acta Metall. 1, 22 (1953).10.1016/0001-6160(53)90006-6 ↗
13. C. Merlet, Mikrochim. Acta 114, 363 (1994).10.1007/BF01244563 ↗
14. C.S. Lue, Y.K. Kuo, C.L. Huang, and W.J. Lai, Phys. Rev. B 69, 125111 (2004).10.1103/PhysRevB.69.125111 ↗
15. J.C.Y. Koh and A. Fortini, Int. J. Heat Mass Transf. 16, 2013 (1973).10.1016/0017-9310(73)90104-X ↗
16. C.D. Lien, M. Finetti, M.A. Nicolet, and S.S. Lau, J. Electron. Mater. 13, 95 (1984).10.1007/BF02659838 ↗
17. H. Sun, D.T. Morelli, M.J. Kirkham, H.M. Meyer III, and E. Lara-Curzio, J. Appl. Phys. 110, 123711 (2011).10.1063/1.3671066 ↗
18. E. Alleno (ICMPE, Paris11) et’al., Rev. Sci. Instrum. 2014, vol. Under review.