journal article·2009-06

Effect of Stand-Off Height on Microstructure and Tensile Strength of the Cu/Sn9Zn/Cu Solder Joint

Fengshun Wu, Bo Wang, Bin Du, Bing An, Yiping Wu

Journal of Electronic Materials· Volume 38· Issue 6
Publisher page

Abstract

To investigate the effect of stand-off height (SOH) on the microstructure and mechanical behavior of certain solder joints, Cu/Sn9Zn/Cu solder joints with a SOH of 100 μm, 50 μm, 20 μm, and 10 μm were prepared and studied. It was found that, as the SOH is reduced, the Zn content in the solder bulk experiences a rapid decrease due to consumption by metallurgical reaction in the reflow process; hence, the microstructure of the solder bulk is changed significantly from a Sn-Zn eutectic structure to a hypoeutectic structure. By contrast, Cu content in the solder bulk experiences a rapid increase with reducing SOH, and this leads to more dissociative intermetallic compounds (IMCs) in the solder bulk. These compositional and microstructural changes induced by reducing the SOH correlate closely with the mechanical properties of the solder joints. In our study it is found that, as SOH is reduced, the tensile strength of the solder joints decreases, the fracture path of the solder joint transfers from the solder bulk into the interface between the IMC layer and the solder bulk, and the fracture mode tends to change from ductile to brittle. These findings point to a probable way to improve the mechanical properties of miniaturized solder joints by controlling the composition and dissociative IMCs in the solder bulk.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. R.Plieninger, M.Dittes, K.Pressel, Microelectron. Reliab. 46, 1868 (2006) doi: 10.1016/j.microrel.2006.08.00810.1016/j.microrel.2006.08.008 ↗
2. F. Wu, M. He, Y. Wu, B. An, and W. Zhang, Proceedings of the 7th International Conference on Electronic Packaging Technology (ICEPT’06), Shanghai, China, 26–29 August (2006), pp. 1–5
3. A. Sharif, Y.C. Chan, and R.A. Islam, Mater. Sci. Eng. B 106, 120 (2004). doi: 10.1016/j.mseb.2003.09.00310.1016/j.mseb.2003.09.003 ↗
4. L. Quan, D.R. Frear, D. Grivas, J.W. Morris Jr., J. Electron. Mater. 16, 203 (1987) doi: 10.1007/BF0265548810.1007/BF02655488 ↗
5. K.H. Prakash, T. Sritharan, Mater. Sci. Eng. A 379, 277 (2004) doi: 10.1016/j.msea.2004.02.04910.1016/j.msea.2004.02.049 ↗
6. B.S. Chiou, J.H. Chang, J.G. Duh, IEEE Trans. CPMT-B 18, 537 (1995)
7. K. Zeng, K.N. Tu, Mater. Sci. Eng. R 38, 55 (2002). doi: 10.1016/S0927-796X(02)00007-410.1016/S0927-796X(02)00007-4 ↗
8. M. Date, T. Shoji, M. Fujiyoshi, K. Sato, and K.N. Tu, Proceedings of the 54th Electronic Components and Technology Conference, Las Vegas, NV (2004), pp. 668–674
9. B.I.Noh, J.M.Koo, J.W.Kim, D.G.Kim, J.D.Nam, J.Joo, S.B.Jung, Intermetallics, 14, 1375 (2006). doi: 10.1016/j.intermet.2005.11.03610.1016/j.intermet.2005.11.036 ↗
10. F.-Y. Hung, T.-S. Lui, L.-H. Chen, J.-G. You, J. Mater. Sci. 42, 3865 (2007). doi: 10.1007/s10853-006-0463-310.1007/s10853-006-0463-3 ↗
11. Solder Data Sheet, Welco Castings, 2 Hillyard Street, Hamilton, Ontario, Canada