Effect of thermal cycling on the growth of intermetallic compounds at the Sn-Zn-Bi-In-P lead-free solder/Cu interface
Source abstract
Abstract
The low-temperature Sn-9Zn-1.5Bi-0.5In-0.01P lead-free solder alloy is used to investigate the intermetallic compounds (IMCs) formed between solder and Cu substrates during thermal cycling. Metallographic observation, scanning electron microscopy, transmission electron microscopy, and electron diffraction analysis are used to study the IMCs. The γ-Cu5Zn8 IMC is found at the Sn-9Zn-1.5Bi-0.5In-0.01P/Cu interface. The IMC grows slowly during thermal cycling. The fatigue life of the Sn-9Zn-1.5Bi-0.5In-0.01P solder joint is longer than that of Pb-Sn eutectic solder joint because the IMC thickness of the latter is much greater than that of the former. Thermodynamic and diffusivity calculations can explain the formation of γ-Cu5Zn8 instead of Cu-Sn IMCs. The growth of IMC layer is caused by the diffusion of Cu and Zn elements. The diffusion coefficient of Zn in the Cu5Zn8 layer is determined to be 1.10×10−12 cm2/sec. A Zn-rich layer is found at the interface, which can prevent the formation of the more brittle Cu-Sn IMCs, slow down the growth of the IMC layer, and consequently enhance the fatigue life of the solder joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. M. Abtewa and G.S. Selvaduray, Mater. Sci. Eng. 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
2. T. Murata, H. Noguchi, S. Kishida, T. Taguchi, S. Asano, R. Oishi, and T. Hori, U.S. patent 6,488,888 (3 December 2002).
3. K. Habu and N. Takeda, U.S. patent 6,649,127 (18 November 2003).
4. T. Nakatsuka, T. Soga, H. Shimokawa, K. Yamamoto, M. Harada, Y. Ochiai, and T. Kamei, U.S. patent 5,942,185 (24 August 1999).
5. J.A. Slattery and C.E.T. White, U.S. patent 5,580,520 (3 December 1996).
6. H.M. Howard, Solders and Soldering: Materials, Design, Production and Analysis for Reliable Bonding (New York: McGraw-Hill Press, 2001), p. 121.
7. R. Rautioaho, O. Nousiainen, T. Saven, S. Leppavuori, and J. Lenkkeri, Microelectron. Reliab. 40, 1527 (2000).10.1016/S0026-2714(00)00151-7 ↗
8. X. Ma, Y.Y. Qian, and F. Yoshida, J. Alloys Compd. 334, 224 (2002).10.1016/S0925-8388(01)01747-9 ↗
9. W. Huang, J.M. Loman, and B. Sener, Microelectron. Reliab. 42, 1229 (2002).10.1016/S0026-2714(02)00090-2 ↗
10. D. Ma, W.D. Wang, and S.K. Lahiri, J. Appl. Phys. 91, 3312 (2002).10.1063/1.1445283 ↗
11. T.C. Chang, M.C. Wang, and M.H. Hon, J. Cryst. Growth 250, 236 (2003).10.1016/S0022-0248(02)02252-2 ↗
12. T.C. Chang, M.C. Wang, and M.H. Hon, J. Cryst. Growth 252, 401 (2003).10.1016/S0022-0248(02)02480-6 ↗
13. L.L. Duan, D.Q. Yu, S.Q. Han, H.T. Ma, and L. Wang, J. Alloys Compd. 381, 202 (2004).10.1016/j.jallcom.2004.03.124 ↗
14. S.P. Yu and M.C. Wang, J. Mater. Res. 16, 76 (2001).10.1557/JMR.2001.0015 ↗
15. H. Homma, J. Jpn. Inst. Electron. Packag. 8, 404 (2005).10.5104/jiep.8.404 ↗
16. M. Tadauchi and K. Matsumoto, J. Jpn. Inst. Electron. Packag. 8, 400 (2005).10.5104/jiep.8.400 ↗
17. R.J.K. Wassink, Soldering in Electronics (London, U.K.: Electrochemical Publ., 1989), p. 149.
18. Q. Wang, “A Study on the Thermal Fatigue Characteristics of Microelectronic Packaging Solder Joints” (Dissertation for the degree of doctor of engineering, Department of Materials Science and Engineering, Tsinghua University, Beijing, 2000).
19. D.H. Desch, Intermetallic Compounds (London: Longmans, Green and Co., 1914), p. 77.