journal article·2015-01

Interfacial Reaction and Mechanical Characterization of Sn–Ag–Cu/Au/Pd(P)/Cu Solder Joints: Thick Pd(P) Deposition

C.E. Ho, W.Z. Hsieh, C.H. Yang, T.C. Yeh, T.T. Kuo

Journal of Electronic Materials· Volume 44· Issue 1
Publisher page

Abstract

The solderability of an Au/Pd(P)/Cu trilayer structure (thickness 0.15 μm/0.6–1.0 μm/20 μm) was investigated by use of a scanning electron microscope equipped with an electron backscatter diffraction system, electron probe microanalysis, and high-speed ball shear (HSBS) testing. Thick Pd(P) deposition, particularly the structure with a Pd(P) thickness of 1.0 μm, resulted in a substantial amount of (Pd,Cu)Sn4 intermetallic compound in the solder matrix after reflow. This phase gradually resettled at the interface and formed a dense layer of (Pd,Cu)Sn4 over (Cu,Pd)6Sn5 during solid-state reaction. A Cu–Pd–Sn isotherm was examined to explain the formation and resettlement of (Pd,Cu)Sn4. The (Pd,Cu)Sn4/(Cu,Pd)6Sn5 dual layer at the interface was a crack initiation site in HSBS testing, and led to substantial degradation of the mechanical strength of solder joints, indicating that thick Pd(P) deposition should be avoided to prevent the Pd-induced embrittlement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. H. Roberts and K. Johal, Lead-Free Soldering (New York: Springer, 2007, Chapter 9).
2. B. Kao, M. Oezkoek, and H. Roberts, Proceedings of the 5 th International Microsystems Packaging Assembly and Circuits Technology (IMPACT) Conference and International 3D IC Conference, article number: 5699489, 20–22 Oct. 2010, Taipei, Taiwan.
3. C.E. Ho, L.H. Hsu, S.W. Lin, and M.A. Rahman, J. Electron. Mater. 41, 2 (2012).10.1007/s11664-011-1710-1 ↗
4. C.Y. Ho, J.G. Duh, C.W. Lin, C.J. Lin, Y.H. Wu, H.C. Hong, and T.H. Wang, J. Mater. Sci. 48, 2724 (2013).10.1007/s10853-012-7070-2 ↗
5. X. Chen, IEEE Microw. Wirel. Compon. Lett. 17, 94 (2007).10.1109/LMWC.2006.890326 ↗
6. X. Wu, D. Cullen, G. Brist, and O. Ramahi, IEEE Trans. Adv. Packag. 31, 182 (2008).10.1109/TADVP.2007.914962 ↗
7. H.W. Deng, Y.J. Zhao, C.J. Liang, and Y.M. Ning, Prog. Electromagn. Res. M9, 1 (2009).10.2528/PIERM09071411 ↗
8. C.E. Ho, T.T. Kuo, W. Gierlotka, and F.M. Ma, J. Electron. Mater. 41, 3276 (2012).10.1007/s11664-012-2200-9 ↗
9. K. Zeng, R. Stierman, D. Abbott, and M. Murtuza, JOM 58, 75 (2006).10.1007/s11837-006-0187-5 ↗
10. K. Suganuma and K.S. Kim, JOM 60, 61 (2008).10.1007/s11837-008-0074-3 ↗
11. K. Banerji and R.F. Darveaux, in Microstructures and Mechanical Properties of Aging Materials, ed. P.K. Liaw, R. Viswanathan, K.L. Murty, E.P. Simonen, and D. Frear, (Warrendale, PA: TMS, 1993), p.431.
12. Z. Mei, M. Kaufmann, A. Eslambolchi, and P. Johnson, Proceedings of Electronic Component and Technology Conference, p.952, 1998.
13. C.E. Ho, R. Zheng, G.L. Luo, A.H. Lin, and C.R. Kao, J. Electron. Mater. 29, 1175 (2000).10.1007/s11664-000-0010-y ↗
14. C.E. Ho, W.H. Wu, C.C. Wang, and Y.C. Lin, J. Electron. Mater. 41, 3266 (2012).10.1007/s11664-012-2196-1 ↗
15. BGA Ball Shear, JESD22-B117, JEDEC Solid State Technology Association (2006).
16. S.P. Peng, W.H. Wu, C.E. Ho, and Y.M. Huang, J. Alloys Compd. 493, 431 (2010).10.1016/j.jallcom.2009.12.119 ↗
17. W.G. Bader, Weld. Res. Suppl. 48, 551 (1969).
18. C.E. Ho, T.T. Kuo, C.C. Wang, and W.H. Wu, Electron. Mater. Lett. 8, 495 (2012).10.1007/s13391-012-2049-3 ↗
19. W.J. Boettinger, M.D. Vaudin, M.E. Williams, L.A. Bendersky, and W.R. Wagner, J. Electron. Mater. 32, 511 (2003).10.1007/s11664-003-0135-x ↗
20. F. Ochoa, J.J. Williams, and N. Chawla, J. Electron. Mater. 32, 1414 (2003).10.1007/s11664-003-0109-z ↗
21. F. Ochoa, X. Deng, and N. Chawla, J. Electron. Mater. 33, 1596 (2004).10.1007/s11664-004-0103-0 ↗
22. R.S. Sidhu, S.V. Madge, X. Deng, and N. Chawla, J. Electron. Mater. 36, 1615 (2007).10.1007/s11664-007-0239-9 ↗
23. G.C. Das and M.B. Bever, Metall. Trans. 4, 2063 (1973).10.1007/BF02643268 ↗
24. R.A. Gagliano and M.E. Fine, JOM 53, 33 (2001).10.1007/s11837-001-0100-1 ↗
25. C.W. Fairhust and J.B. Cohen, Acta Crystallogr. Sect. B-Struct. Sci. 28, 371 (1972).10.1107/S0567740872002432 ↗
26. K. Zeng and K.N. Tu, Mater. Sci. Eng. R38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
27. S.K. Kang, W.K. Choi, D.Y. Shih, D.W. Henderson, T. Gosselin, A. Sarkhel, C. Goldsmith, and K.J. Punlitz, Proceedings of Electronic Component and Technology Conference, p. 64, 2003.
28. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compd. 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
29. S.K. Kang, W.K. Choi, D.Y. Shih, D.W. Henderson, T. Gosselin, A. Sarkhel, C. Goldsmith, and K.J. Puttlitz, JOM 55, 61 (2003).10.1007/s11837-003-0143-6 ↗
30. H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 68, 2204 (1996).10.1063/1.116013 ↗
31. C.Y. Liu, H.K. Kim, K.N. Tu, and P.A. Totta, Appl. Phys. Lett. 69, 4014 (1996).10.1063/1.117855 ↗
32. K.N. Tu, F. Ku, and T.Y. Lee, J. Electron. Mater. 30, 1129 (2001).10.1007/s11664-001-0139-3 ↗
33. T.Y. Lee, W.J. Choi, K.N. Tu, J.W. Jang, S.M. Kuo, J.K. Lin, D.R. Frear, K. Zeng, and J.K. Kivilahti, J. Mater. Res. 17, 291 (2002).10.1557/JMR.2002.0042 ↗
34. W. Hönle and H.G. von Schnering, Z. Kristallogr. 153, 339 (1980).10.1524/zkri.1980.153.3-4.339 ↗
35. C.E. Ho, C.C. Wang, M.A. Rahman, and Y.C. Lin, Thin Solid Films 529, 369 (2013).10.1016/j.tsf.2012.07.076 ↗
36. B.M. Chung, Y.H. Baek, J. Choi, and J.Y. Huh, J. Electron. Mater. 41, 3348 (2012).10.1007/s11664-012-2320-2 ↗
37. Y.M. Kim, J.Y. Park, and Y.H. Kim, J. Electron. Mater. 41, 763 (2012).10.1007/s11664-012-1921-0 ↗
38. M.A. Rahman, C.W. Fan, S.J. Wang, C.E. Ho, and W. Gierlotka, J. Electron. Mater. 43, 176 (2014).10.1007/s11664-013-2735-4 ↗
39. C.C. Chang, Y.W. Lin, Y.W. Wang, and C.R. Kao, J. Alloys. Compd. 492, 99 (2010).10.1016/j.jallcom.2009.11.088 ↗