Effect of Se Substitution on Structural and Electrical Transport Properties of Bi0.4Sb1.6Se3x Te3(1−x) Hexagonal Rods
Source abstract
Abstract
In the current study, novel hexagonal rods based on Bi0.4Sb1.6Te3 ingots dispersed with x amount of Se (x = 0.0, 0.2, 0.4, 0.6, 0.8, and 1.0) in the form Bi0.4Sb1.6Se3xTe3(1−x) were synthesized via a standard solid-state microwave route. The morphologies of these rods were explored using field-emission scanning electron microscopy (FESEM). The crystal structure of the powders was examined by x-ray diffraction (XRD) analysis, which showed that powders of the 0.0 ≤ x ≤ 0.8 samples could be indexed to the rhombohedral phase, whereas the sample with x = 1.0 had an orthorhombic phase structure. The influence of variations in the Se content on the thermoelectric properties was studied in the temperature range from 300 K to 523 K. Alloying of Se into Bi0.4Sb1.6Te3 effectively caused a decrease in the hole concentration and, thus, a decrease in the electrical conductivity and an increase in the Seebeck coefficient. The maximal power factor measured in the present work was 7.47 mW/mK2 at 373 K for the x = 0.8 sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Topological Materials and Phenomena · Heusler alloys: electronic and magnetic properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. S. Hong, S. Lee, and B. Chun, Mater. Sci. Eng. B 98, 232–238 (2003).10.1016/S0921-5107(03)00042-4 ↗
2. L. Zhao, B. Zhang, J. Li, M. Zhou, W. Liu, and J. Liu, J. Alloys Compd. 455, 259–264 (2008).10.1016/j.jallcom.2007.01.015 ↗
3. C. Moon, S. Shin, D. Kim, and T. Kim, J. Alloys Compd. 504, S504–S507 (2010).10.1016/j.jallcom.2010.03.114 ↗
4. S. Nakajima, J. Phys. Chem. Solids 24, 479–485 (1963).10.1016/0022-3697(63)90207-5 ↗
5. Y. Zhou, X. Li, S. Bai, and L. Chen, J. Cryst. Growth 312, 775–780 (2010).10.1016/j.jcrysgro.2009.12.061 ↗
6. Y. Zhang, G. Xu, J. Mi, F. Han, Ze. Wang, and C. Ge, Mater. Res. Bull. 46, 760–764 (2011).10.1016/j.materresbull.2010.11.024 ↗
7. Y.H. Zhang, T.J. Zhu, J.P. Tu, and X.B. Zhao, Mater. Chem. Phys. 103, 484 (2007).10.1016/j.matchemphys.2007.02.059 ↗
8. T. Su, P. Zhu, H. Ma, G. Ren, L. Chen, W. Guo, Y. Iami, and X. Jia, Solid State Commun. 138, 580–584 (2006).10.1016/j.ssc.2006.04.018 ↗
9. J. Jiang, L. Chen, S. Bai, Q. Yao, and Q. Wang, J. Cryst. Growth 277, 258–263 (2005).10.1016/j.jcrysgro.2004.12.144 ↗
10. M.G. Kanatzidis, S.D. Mahanti, and T.P. Hogan, Chemistry, Physics and Materials Science of Thermoelectric Materials, 2nd ed. (New York: Plenum, 2003).10.1007/978-1-4419-9278-9 ↗
11. G.S. Nolas, J. Sharp, and H.J. Goldsmid, Thermoelectrics, 1st ed. (New York: Springer, 2001).10.1007/978-3-662-04569-5 ↗
12. C. Mastrovito, J.W. Lekse, and J.A. Aitken, J. Solid State Chem. 180, 3262–3270 (2007).10.1016/j.jssc.2007.09.001 ↗
13. Z. Zhou, Y.-J. Chien, and C. Uher, Appl. Phys. Lett. 87, 112503 (2005).10.1063/1.2045561 ↗
14. A. Kadhim, A. Hmood, and H. Abu Hassan, Mater. Lett. 65, 3105–3108 (2011).10.1016/j.matlet.2011.06.069 ↗
15. T. Suriwong, S. Thongtem, and T. Thongtem, Mater. Lett. 63, 2103–2106 (2009).10.1016/j.matlet.2009.07.002 ↗
16. G. Zhou, V.G. Pol, O. Palchika, R. Kerner, E. Sominski, Y. Koltypin, and A. Gedanken, J. Solid State Chem. 177, 361 (2004).10.1016/j.jssc.2003.08.031 ↗
17. K.J. Rao, B. Vaidhyanathan, M. Ganguli, and P.A. Ramakrishnan, Chem. Mater. 11, 882 (1999).10.1021/cm9803859 ↗
18. R. Roy, D. Agrawal, J. Cheng, and S. Gedevanishvili, Nature 401, 304 (1999).10.1038/45853 ↗
19. M. Jeselnik, R.S. Varma, S. Polanc, and M. Kocevar, Green Chem. 4, 35 (2002).10.1039/b108029f ↗
20. A. Hmood, A. Kadhim, and H. Abu Hassan, Super. Microstruct. 53, 39 (2013).10.1016/j.spmi.2012.09.005 ↗
21. W. Shanyu, X. Wenjie, L. Han, and T. Xinfeng, Intermetallics 19, 1024 (2011).10.1016/j.intermet.2011.03.006 ↗
22. J. Horak, K. Cermak, and L. Koudelka, Phys. J. Chem. Solids 47, 805 (1986).10.1016/0022-3697(86)90010-7 ↗
23. H.C. Kim, T.S. Oh, and D.-B. Hyun, Phys. J. Chem. Solids 61, 743 (2000).10.1016/S0022-3697(99)00269-3 ↗
24. A. Hmood, A. Kadhim, and H. Abu Hassan, Mater. Chem. Phys. 136, 1148 (2012).10.1016/j.matchemphys.2012.08.069 ↗
25. B.D. Cullity, Element of X-ray Diffraction, 3rd ed. (Reading: Wesley, 1967).
26. D.H. Kim, C. Kim, S.H. Heo, and H. Kim, Acta Mater. 59, 405 (2011).10.1016/j.actamat.2010.09.054 ↗
27. Q. Zhao and Y.G. Wang, J. Alloys Compd. 497, 57 (2010).10.1016/j.jallcom.2010.03.077 ↗
28. D.M. Rowe, Thermoelectrics Handbook: Macro to Nano (Boca Raton: CRC Press Taylor & Francis Group, 2006).
29. T. Plechacek, J. Navratil, and J. Horak, J. Solid State Chem. 165, 35 (2002).10.1006/jssc.2001.9486 ↗
30. J.L. Cui, W.J. Xiu, L.D. Mao, P.Z. Ying, L. Jiang, and X. Qian, J. Solid State Chem. 180, 1158 (2007).10.1016/j.jssc.2006.12.010 ↗
31. A. Hmood, A. Kadhim, and H. Abu Hassan, J. Alloys Compd. 520, 1 (2012).10.1016/j.jallcom.2011.12.044 ↗