Compensation of Surface Roughness Using an Au Intermediate Layer in a Cu Direct Bonding Process
Source abstract
Abstract
Copper-copper (Cu-Cu) direct bonding assisted by direct immersion gold (DIG) was demonstrated. Cu-Cu direct bonding is a critical technology for inductively coupled memory interconnections. To solve the problems of conventional methods of Cu-Cu direct bonding, a plating process using DIG to form an intermediate layer was selected. The concept of the developed bonding process is to use deformation of DIG to compensate for the surface roughness of the Cu substrates during application of pressure and annealing. Using this method, precise surface flattening of Cu substrates is not necessary. Bonding can be achieved even in an air atmosphere. A sample bonded at a temperature of 350°C failed within the chip in a shear test. It was found that bonding can be achieved when the gold (Au) thickness is greater than the half of the surface roughness of Cu at the bonding temperature. Transmission electron microscopy-energy-dispersive x-ray spectroscopy revealed that Au diffused into Cu during bonding. The diffusion constant of Au into Cu was investigated through a numerical calculation. The obtained results showed good agreement with the literature values.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: 3D IC and TSV technologies · Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. J.-S. Kim, C.S. Oh, H. Lee, D. Lee, H.R. Hwang, S. Hwang, B. Na, J. Moon, J.-G. Kim, H. Park, J.-W. Ryu, K. Park, S.K. Kang, S.-Y. Kim, H. Kim, J.-M. Bang, H. Cho, M. Jang, C. Han, J.-B. Lee, J.S. Choi, and Y.-H. Jun, IEEE J. Solid-State Circuits 47, 107 (2012).10.1109/JSSC.2011.2164731 ↗
2. M. Koyanagi, T. Fukushima, and T. Tanaka, Proc. IEEE 97, 49 (2009).10.1109/JPROC.2008.2007463 ↗
3. K. Sakuma, P.S. Andry, C.K. Tsang, S.L. Wright, B. Dang, C.S. Patel, B.C. Webb, J. Maria, E.J. Sprogis, S.K. Kang, R.J. Polastre, R.R. Horton, and J.U. Knickerbocker, IBM J. Res. Dev. 52, 611 (2008).10.1147/JRD.2008.5388567 ↗
4. Y. Take, H. Matsutani, D. Sasaki, M. Koibuchi, T. Kuroda, and H. Amano, IEEE Trans. Comput. 63, 748 (2014).10.1109/TC.2012.249 ↗
5. Y.S. Kim, S. Kodama, Y. Mizushima, N. Maeda, H. Kitada, K. Fujimoto, T. Nakamura, D. Suzuki, A. Kawai, K. Arai, and T. Ohba, in Symp. VLSI Technol., Dig. Tech. Pap. (2014), pp. 1.
6. R. He, M. Fujino, A. Yamauchi, Y. Wang, and T. Suga, ECS J. Solid State Sci. Technol. 5, 419 (2016).10.1149/2.0201607jss ↗
7. T. Sakai, N. Imaizumi, and S. Sakuyama, in ICEP-IAAC Proceedings (2015), pp. 464.
8. T. Ohba, N. Maeda, H. Kitada, K. Fujimoto, K. Suzuki, T. Nakamura, A. Kawai, and K. Arai, Microelectron. Eng. 87, 485 (2010).10.1016/j.mee.2009.07.006 ↗
9. M. Ohyama, M. Nimura, J. Mizuno, S. Shoji, T. Nonaka, Y. Shinba, and A. Shigetou, Microelectron. Reliab. 59, 134 (2016).10.1016/j.microrel.2015.12.033 ↗
10. T. Shimatsu, M. Uomoto, K. Oba, and Y. Furukata, in LTB-3D (2012), p. 103.
11. D.F. Lim, J. Wei, K.C. Leong, and C.S. Tan, ECS Solid State Lett. 1, 11 (2012).10.1149/2.013201ssl ↗
12. D.B. Butrymowicz, J.R. Manning, and M.E. Read, J. Phys. Chem. Ref. Data 3, 527 (1974).10.1063/1.3253145 ↗
13. P.M. Hall, J.M. Morabito, and N.T. Panousis, Thin Solid Films 41, 341 (1977).10.1016/0040-6090(77)90320-0 ↗
14. M.R. Pinnel and J.E. Bennett, Metall. Trans. 10A, 741 (1979).10.1007/BF02658396 ↗
15. N. Unami, K. Sakuma, J. Mizuno, and S. Shoji, Jpn. J. Appl. Phys. 49, 06GN12 (2010).10.1143/JJAP.49.06GN12 ↗
16. K.P.L. Pun, N.S. Dhaka, C-w Cheung, and A.H.S. Chan, Microelectron. Reliab. 78, 339 (2017).10.1016/j.microrel.2017.09.019 ↗
17. S. Hashimoto, M. Kiso, Y. Oda, H. Otake, G. Milad, and D. Gudaczauskas, Circuit World 32, 16 (2006).10.1108/03056120610616517 ↗
18. M. Ratzker, A. Pearl, M. Osterman, M. Pecht, and G. Milad, J. Electron. Mater. 43, 3885 (2014).10.1007/s11664-014-3322-z ↗
19. M.A.A.M. Salleh, S.D. McDonald, and K. Nogita, J. Mater. Process. Technol. 242, 235 (2017).10.1016/j.jmatprotec.2016.11.031 ↗
20. H. Noma, Y. Oyama, H. Nishiwaki, M. Takami, T. Takatani, K. Toriyama, and Y. Orii, Trans. Jpn. Inst. Electron. Packag. 2, 85 (2009).10.5104/jiepeng.2.85 ↗
21. H. Noma, K. Toriyama, K. Okamoto, K. Matsumoto, E. Ohno, H. Mori, and Y. Orii, Trans. Jpn. Inst. Electron. Packag. 4, 95 (2011).10.5104/jiepeng.4.95 ↗
22. A. Okada, S. Shoji, M. Nimura, A. Shigetou, K. Sakuma, and J. Mizuno, Mater. Trans. 54, 2139 (2013).10.2320/matertrans.MF201313 ↗
23. H. Petrova, Jorge P. Juste, I. Pastoriza-Santos, G.V. Hartland, L.M. Liz-Marzan, and P. Mulvaney, Phys. Chem. Chem. Phys. 8, 814 (2006).10.1039/B514644E ↗
24. D.S. Liu and Y.C. Chao, J. Electron. Mater. 32, 159 (2003).10.1007/s11664-003-0187-y ↗
25. G.-D. Sim and J.J. Vlassak, Scr. Mater. 75, 34 (2014).10.1016/j.scriptamat.2013.11.011 ↗
26. K. Jonnalagadda, N. Karanjgaokar, I. Chasiotis, J. Chee, and D. Peroulis, Acta Mater. 58, 4674 (2010).10.1016/j.actamat.2010.04.048 ↗
27. J. Lohmiller, N.C. Woo, and R. Spolenak, Mater. Sci. Eng. A 527, 7731 (2010).10.1016/j.msea.2010.08.043 ↗
28. K. Takahashi and T. Onzawa, J. High Press. Inst. Jpn. 35, 45 (1997).