Corrosion Investigations of Ruthenium in Potassium Periodate Solutions Relevant for Chemical Mechanical Polishing
Source abstract
Abstract
Ruthenium is the most promising material for the barrier layer used for the sub 14 nm technology node in integrated circuits manufacturing. Potassium periodate (KIO4)-based slurry is used in the chemical mechanical planarization (CMP) process of the barrier layer. However, the electrochemical and corrosion properties of ruthenium have not been investigated in such slurry. In this paper, the electrochemical and corrosion behaviors of ruthenium in KIO4 solutions were investigated under static conditions but at different pH values by potentiodynamic polarization and electrochemical impedance spectroscopy measurements, combined with surface chemical analysis using auger electron spectroscopy. Moreover, to study wear enhanced corrosion during CMP, tribocorrosion experiments were carried out to monitor the current density changes during and after mechanical scratching. The results show that at pH 6, ruthenium forms a relatively thick and heterogeneous surface film composed of RuO2·2H2O/RuO3, showing a high corrosion resistance and it exhibits a quick repassivation after mechanical scratching. At pH 4, ruthenium shows a passivation behavior with formation of a uniform and conductive oxide like RuO2·2H2O. It should be noted that there is a possible formation of RuO4 toxic gas under this condition, which should be avoided in the actual production. However, at pH 11, ruthenium exhibits no considerable passivity and the corrosion proceeds uniformly.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Diamond and Carbon-based Materials Research · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. O. Chyan, T.N. Arunagiri, and T. Ponnuswamy, J. Electrochem. Soc. 150, C347 (2003).10.1149/1.1565138 ↗
2. A. Roule, M. Amuntencei, E. Deronzier, P.H. Haumesser, S. Da Silva, X. Avale, O. Pollet, R. Baskaran, and G. Passemard, Microelectron. Eng. 84, 2610 (2007).10.1016/j.mee.2007.06.014 ↗
3. R. Chan, T.N. Arunagiri, Y. Zhang, O. Chyan, R.M. Wallace, M.J. Kim, and T.Q. Hurd, Electrochem. Solid-State Lett. 7, G154 (2004).10.1149/1.1757113 ↗
4. C. Wu, Y. Wang, and W. Lee, J. Electrochem. Soc. 159, D684 (2012).10.1149/2.048211jes ↗
5. X. Qu, J. Tan, M. Zhou, T. Chen, Q. Xie, G. Ru, and B.Z. Li, Appl. Phys. Lett. 88, 151912 (2006).10.1063/1.2195112 ↗
6. L. Jiang, Y. He, Y. Li, and J. Luo, Appl. Surf. Sci. 317, 332 (2014).10.1016/j.apsusc.2014.08.063 ↗
7. T.N. Arunagiri, Y. Zhang, O. Chyan, M.J. Kim, and T.Q. Hurd, J. Electrochem. Soc. 152, G808 (2005).10.1149/1.2039939 ↗
8. M.W. Lane, C.E. Murray, F.R. McFeely, P.M. Vereecken, and R. Rosenberg, Appl. Phys. Lett. 83, 2330 (2003).10.1063/1.1610256 ↗
9. M. Krishnan, J.W. Nalaskowski, and L.M. Cook, Chem. Rev. 110, 178 (2009).10.1021/cr900170z ↗
10. L. Jiang, Y. Lan, Y. He, Y. Li, and J. Luo, Appl. Surf. Sci. 288, 265 (2014).10.1016/j.apsusc.2013.10.020 ↗
11. W.C. Chen, S.C. Lin, B.T. Dai, and M.S. Tsai, J. Electrochem. Soc. 146, 3004 (1999).10.1149/1.1392043 ↗
12. M.C. Turk, S.E. Rock, H.P. Amanapu, L.G. Teugels, and D. Roy, ECS J. Solid State Sc. 2, 205 (2013).10.1149/2.009305jss ↗
13. J. Cheng, T. Wang, H. Mei, W. Zhou, and X. Lu, Appl. Surf. Sci. 320, 531 (2014).10.1016/j.apsusc.2014.09.062 ↗
14. S.N. Victoria, P.P. Sharma, I.I. Suni, and S. Ramanathan, Electrochem. Solid-State Lett. 13, H385 (2010).10.1149/1.3481948 ↗
15. S.N. Victoria, J. Jebaraj, I.I. Suni, and S. Ramanathan, Electrochem. Solid-State Lett. 15, H55 (2011).10.1149/2.005203esl ↗
16. B.C. Peethala and S.V. Babu, J. Electrochem. Soc. 158, H271 (2011).10.1149/1.3528942 ↗
17. H. Cui, J. Park, and J. Park, J. Electrochem. Soc. 159, H335 (2012).10.1149/2.103203jes ↗
18. D. Widmann, H. Mader, and H. Friedrich, Technology of Integrated Circuits, 4th ed. (Berlin: Springer, 2013), pp. 355–360.
19. B.C. Peethala, D. Roy, and S.V. Babu, Electrochem. Solid-State Lett. 14, H306 (2011).10.1149/1.3589308 ↗
20. X. Zeng, J. Wang, H. Lu, F. Chen, X. Zhang, and X. Qu, J. Electrochem. Soc. 159, C525 (2012).10.1149/2.055211jes ↗
21. I. Kim, B. Cho, J. Park, J. Park, and H. Park, J. Electrochem. Soc. 156, H188 (2009).10.1149/1.3058594 ↗
22. G.L. Zimmerman, S.J. Riviello, T.A. Glauser, and J.G. Kay, J. Phys. Chem. 94, 2399 (1990).10.1021/j100369a039 ↗
23. R.E. Connick and C.R. Hurley, J. Am. Chem. Soc. 74, 5012 (1952).10.1021/ja01140a007 ↗
24. E.A. Seddon and K.R. Seddon, The Chemistry of Ruthenium, 1st ed. (Amsterdam: Elsevier, 2013), pp. 100–120.
25. L. Jiang, Y. He, X. Lu, and J. Luo, in International Conference on Planarization/CMP Technology Conference Proceedings (2014), pp. 209–212
26. P.R. Nalla, Interfacial studies of bimetallic corrosion in copper/ruthenium systems and silicon surface modification with organic and organometallic chemistry. Doctoral Thesis, University of North Texas (2006)
27. J. Jiang, M.M. Stack, and A. Neville, Tribol. Int. 35, 669 (2002).10.1016/S0301-679X(02)00058-0 ↗
28. J. Cheng, T. Wang, Z. Chai, and X. Lu, Tribol. Lett. 58, 1 (2015).10.1016/j.triboint.2014.07.014 ↗
29. S.W. Watson, F.J. Friedersdorf, B.W. Madsen, and S.D. Cramer, Wear 181, 476 (1995).10.1016/0043-1648(95)90161-2 ↗
30. D. Landolt, J. Phys. D 39, 3121 (2006).10.1088/0022-3727/39/15/S01 ↗
31. A. Karagoz, V. Craciun, and G.B. Basim, ECS J. Solid State Sci. 4, P1 (2015).10.1149/2.0151412jss ↗
32. J. Stojadinović, L. Mendia, D. Bouvet, M. Declercq, and S. Mischler, Wear 267, 186 (2009).10.1016/j.wear.2008.11.022 ↗
33. J. Li, Y. Liu, X. Lu, J. Luo, and Y. Dai, Tribol. Lett. 49, 11 (2013).10.1007/s11249-012-0037-2 ↗
34. J. Li, Y. Liu, T. Wang, and X. Lu, Mater. Chem. Phys. (2015)
35. J. Li, Z. Chai, Y. Liu, and X. Lu, Tribol. Lett. 50, 177 (2013).10.1007/s11249-013-0110-5 ↗
36. S.B. Madden and J.R. Scully, J. Electrochem. Soc. 161, C162 (2014).10.1149/2.075403jes ↗
37. M. Pourbaix, Atlas of Electrochemical Equilibria in Aqueous Solutions, 2nd ed. (Houston: National Association of Corrosion Engineers, 1974), pp. 618–621.
38. N. Takeno, Atlas of Eh-pH diagrams. (Geological Survey of Japan Open File Report, 2005), ftp://ftp.conservation.ca. gov/pub/oil/SB4DEIR/docs/HAZ_Takeno_2005.pdf . Accessed 9 August 2015
39. L. Jiang, Y. He, X. Niu, Y. Li, and J. Luo, Thin Solid Films 558, 272 (2014).10.1016/j.tsf.2014.01.086 ↗
40. H.Y.H. Chan, C.G. Takoudis, and M.J. Weaver, J. Catal. 172, 336 (1997).10.1006/jcat.1997.1841 ↗
41. J. Cheng, T. Wang, L. Jiang, and X. Lu, Appl. Surf. Sci. 351, 401 (2015).10.1016/j.apsusc.2015.05.150 ↗
42. N. Alonso-Vante, H. Tributsch, and O. Solorza-Feria, Electrochim. Acta 40, 567 (1995).10.1016/0013-4686(94)00377-D ↗
43. C. Chang and T. Wen, J. Appl. Electrochem. 27, 355 (1997).10.1023/A:1018445100515 ↗
44. W. Dmowski, T. Egami, K.E. Swider-Lyons, C.T. Love, and D.R. Rolison, J. Phys. Chem. B 106, 12677 (2002).10.1021/jp026228l ↗
45. A. Norlin, J. Pan, and C. Leygraf, J. Electrochem. Soc. 152, J85 (2005).10.1149/1.1933372 ↗
46. S. Bhaskar, P.S. Dobal, S.B. Majumder, and R.S. Katiyar, J. Appl. Phys. 89, 2987 (2001).10.1063/1.1337588 ↗
47. L. Atanasoska, R.T. Atanasoski, F.H. Pollak, and W.E. O’Grady, Surf. Sci. 230, 95 (1990).10.1016/0039-6028(90)90019-5 ↗
48. R.M. Hawk and K. Gadepally, Proceedings Arkansas Academy of Science 45, 33 (1991).
49. W. Chen, T. Wen, C. Hu, and A. Gopalan, Electrochim. Acta 47, 1305 (2002).10.1016/S0013-4686(01)00849-0 ↗
50. M.A. Vorotyntsev, J. Badiali, and G. Inzelt, J. Electroanal. Chem. 472, 7 (1999).10.1016/S0022-0728(99)00253-3 ↗
51. R.C. Barik, J.A. Wharton, R. Wood, K.R. Stokes, and R.L. Jones, Surf. Coat. Technol. 199, 158 (2005).10.1016/j.surfcoat.2004.09.038 ↗
52. J.R. Mcdonald, Impedance Spectroscopy: Emphasizing Solid Materials and Systems, 1st ed. (New York: Wiley, 1987), pp. 235–242.
53. P. Bommersbach, C. Alemany-Dumont, J. Millet, and B. Normand, Electrochim. Acta 51, 1076 (2005).10.1016/j.electacta.2005.06.001 ↗
54. M.S. Morad and A.K. El-Dean, Corros. Sci. 48, 3398 (2006).10.1016/j.corsci.2005.12.006 ↗
55. M.H. Hussin and M.J. Kassim, Mater. Chem. Phys. 125, 461 (2011).10.1016/j.matchemphys.2010.10.032 ↗
56. H. Ma, S. Chen, B. Yin, S. Zhao, and X. Liu, Corros. Sci. 45, 867 (2003).10.1016/S0010-938X(02)00175-0 ↗
57. S.L. de Assis, S. Wolynec, and I. Costa, Electrochim. Acta 51, 1815 (2006).10.1016/j.electacta.2005.02.121 ↗
58. D.D. Macdonald, J. Electrochem. Soc. 139, 3434 (1992).10.1149/1.2069096 ↗
59. B. DÃaz, E. Härkönen, J. Åšwiatowska, V. Maurice, A. Seyeux, P. Marcus, and M. Ritala, Corros. Sci. 53, 2168 (2011).10.1016/j.corsci.2011.02.036 ↗
60. J. Pan, D. Thierry, and C. Leygraf, Electrochim. Acta 41, 1143 (1996).10.1016/0013-4686(95)00465-3 ↗
61. A.C. Vieira, L.A. Rocha, N. Papageorgiou, and S. Mischler, Corros. Sci. 54, 26 (2012).10.1016/j.corsci.2011.08.041 ↗
62. N. Diomidis, J. Celis, P. Ponthiaux, and F. Wenger, Wear 269, 93 (2010).10.1016/j.wear.2010.03.010 ↗
63. J. Cheng, T. Wang, Y. He, and X. Lu, Appl. Surf. Sci. 337, 130 (2015).10.1016/j.apsusc.2015.02.076 ↗
64. M. Forslund, C. Leygraf, P.M. Claesson, C. Lin, and J. Pan, J. Electrochem. Soc. 160, C423 (2013).10.1149/2.113308jes ↗