Investigation on the Microstructure, Interfacial IMC Layer, and Mechanical Properties of Cu/Sn-0.7Cu-xNi/Cu Solder Joints
Source abstract
Abstract
Sn-0.7Cu-xNi composite solder has been fabricated via mechanical mixing of different weight percentages of Ni particles with Sn-0.7Cu solder paste, and the effect of the Ni concentration on the microstructure, wettability, and tensile properties of Cu/Sn-0.7Cu-xNi/Cu solder joints investigated. The results show that refined dot-shaped particles of intermetallic compounds (IMCs) are uniformly dispersed in a primary β-Sn matrix in the Cu/Sn-0.7Cu-(0.05–0.1)Ni/Cu solder joints. The interfacial IMC layer thickness increased slightly when adding Ni content to 0.05 wt.%, then rapidly when further increasing the Ni concentration to 0.4 wt.%. Excellent wettability with bright appearance was obtained for the Sn-0.7Cu-0.05Ni solder due to diminished interfacial tension. The tensile properties improved after adding Ni content to 0.05 wt.% due to the presence of the refined dot-like IMC particles, in agreement with theoretical predictions based on the combination of dispersion and grain-refinement strengthening mechanisms. Refined microstructure and enhanced mechanical properties were obtained for the Cu/Sn-0.7Cu-0.05Ni/Cu solder joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. E. Lillie, P. Sandborn, and D. Humphrey, Microelectron. Reliab. 55, 969 (2015).10.1016/j.microrel.2015.02.022 ↗
2. A.A. El-Daly and A.M. El-Taher, Mater. Des. 51, 789 (2013).10.1016/j.matdes.2013.04.081 ↗
3. L. Yang, Y.C. Zhang, C.C. Du, J. Dai, and N. Zhang, Microelectron. Reliab. 55, 596 (2015).10.1016/j.microrel.2014.12.017 ↗
4. H. Nishikawa, J.Y. Piao, and T. Takemoto, J. Electron. Mater. 35, 1127 (2006).10.1007/BF02692576 ↗
5. Y. Tang, G.Y. Li, S.M. Luo, K.Q. Wang, and B. Zhou, J. Electron. Mater. 44, 2440 (2015).10.1007/s11664-015-3773-x ↗
6. L.C. Tsao, S.Y. Chang, C.I. Lee, W.H. Sun, and C.H. Huang, Mater. Des. 31, 4831 (2010).10.1016/j.matdes.2010.04.033 ↗
7. Y. Tang, G.Y. Li, D.Q. Chen, and Y.C. Pan, J. Mater. Sci. Mater. Electron. 25, 981 (2014).10.1007/s10854-013-1675-3 ↗
8. P. Xue, S.B. Xue, Y.F. Shen, F. Long, and H. Zhu, J. Mater. Sci. Mater. Electron. 25, 3520 (2014).10.1007/s10854-014-2049-1 ↗
9. A.K. Gain, Y.C. Chan, and W.K.C. Yung, Mater. Sci. Eng. B 162, 92 (2009).10.1016/j.mseb.2009.03.010 ↗
10. X.D. Liu, Y.D. Han, H.Y. Jing, J. Wei, and L.Y. Xu, Mater. Sci. Eng. A 562, 25 (2013).10.1016/j.msea.2012.10.079 ↗
11. H.X. Xie, D. Friedman, K. Mirpuri, and N. Chawla, J. Electron. Mater. 43, 33 (2014).10.1007/s11664-013-2667-z ↗
12. X. Chen, J. Zhou, F. Xue, J. Bai, and Y. Yao, J. Electron. Mater. 44, 725 (2015).10.1007/s11664-014-3537-z ↗
13. P. Xue, S.B. Xue, Y.F. Shen, and H. Zhu, J. Mater. Sci. Mater. Electron. 25, 2671 (2014).10.1007/s10854-014-1927-x ↗
14. Y.L. Tseng, Y.C. Chang, and C.C. Chen, J. Electron. Mater. 44, 581 (2015).10.1007/s11664-014-3517-3 ↗
15. J. Shen, Y.Y. Pu, H.G. Yin, and Q. Tang, J. Electron. Mater. 44, 532 (2015).10.1007/s11664-014-3460-3 ↗
16. F. Guo, J. Lee, S. Choi, J.P. Lucas, T.R. Bieler, and K.N. Subramanian, J. Electron. Mater. 30, 1073 (2001).10.1007/s11664-001-0132-x ↗
17. F. Guo, J. Lee, J.P. Lucas, K.N. Subramanian, and T.R. Bieler, J. Electron. Mater. 30, 1222 (2001).10.1007/s11664-001-0153-5 ↗
18. B.L. Silva, N. Cheung, A. Garcia, and J.E. Spinelli, J. Alloys Compd. 632, 274 (2015).10.1016/j.jallcom.2015.01.140 ↗
19. W.X. Dong, Y.W. Shi, Y.P. Lei, Z.D. Xia, and F. Guo, J. Mater. Sci. Mater. Electron. 20, 1008 (2009).10.1007/s10854-008-9826-7 ↗
20. A.E. Hammad, Mater. Des. 50, 108 (2013).10.1016/j.matdes.2013.03.010 ↗
21. A.A. El-Daly, A.E. Hammad, G.A. Al-Ganainy, and A.A. Ibrahiem, Mater. Des. 52, 966 (2013).10.1016/j.matdes.2013.06.023 ↗
22. S. Yagi, T. Ichitsubo, E. Matsubara, M. Yamaguchi, H. Kimura, and K. Sasamori, J. Alloys Compd. 484, 185 (2009).10.1016/j.jallcom.2009.05.088 ↗
23. M.M. Billah, K.M. Shorowordi, and A. Sharif, J. Alloys Compd. 585, 32 (2014).10.1016/j.jallcom.2013.09.131 ↗
24. T. Fouzder, Q.Q. Li, Y.C. Chan, and D.K. Chan, J. Mater. Sci. Mater. Electron. 25, 2529 (2014).10.1007/s10854-014-1906-2 ↗
25. J. Shen, Y.Y. Pu, D. Wu, Q. Tang, and M.L. Zhao, J. Mater. Sci. Mater. Electron. 26, 1572 (2015).10.1007/s10854-014-2577-8 ↗
26. C.H. Lin, S.W. Chen, and C.H. Wang, J. Electron. Mater. 31, 907 (2002).10.1007/s11664-002-0182-8 ↗
27. A.A. El-daly, A. Fawzy, S.F. Mansour, and M.J. Younis, Mater. Sci. Eng. A 578, 62 (2013).10.1016/j.msea.2013.04.022 ↗