journal article·2016-03

Effect of Nanostructuring and High-Pressure Torsion Process on Thermal Conductivity of Carrier-Doped Chalcopyrite

Naohito Tsujii, Fanqiang Meng, Koich Tsuchiya, Satofumi Maruyama, Takao Mori

Journal of Electronic Materials· Volume 45· Issue 3
Publisher page

Abstract

Carrier-doped chalcopyrite (CuFeS2) has been shown to exhibit a high power factor exceeding 1 mW/K2-m at room temperature. However, it has a relatively high thermal conductivity of 6 W/K-m in this temperature range. To reduce the thermal conductivity, nanostructuring by a ball-milling process and the high-pressure torsion (HPT) method have been applied to Zn0.03Cu0.97FeS2. While ball milling yielded a fine powder specimen with crystal grain size of about 20 nm, a subsequent synthesis process using spark plasma sintering at 720 K for 2 min caused crystal grain regrowth. The thermal conductivity of the ball-milled and spark-plasma-sintered sample was similar to that of a bulk sample above room temperature. The HPT-treated sample showed a significant drop in thermal conductivity over the entire temperature range. However, the electrical resistivity increased, resulting in a degradation of the overall thermoelectric performance. Annealing at 520 K after HPT was partly effective in recovering the electrical conductivity while retaining low thermal conductivity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Chalcogenide Semiconductor Thin Films · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. K. Suekuni, K. Tsuruta, T. Ariga, and M. Koyano, Appl. Phys. Express 5, 051201 (2012).10.1143/APEX.5.051201 ↗
2. X. Lu, D.T. Morelli, Y. Xia, F. Zhou, V. Ozolins, H. Chi, X. Zhou, and C. Uher, Adv. Energy Mater. 3, 342 (2013).10.1002/aenm.201200650 ↗
3. K. Suekuni, K. Tsuruta, M. Kunii, H. Nishiate, E. Nishibori, S. Maki, M. Ohta, A. Yamamoto, and M. Koyano, J. Appl. Phys. 113, 043712 (2013).10.1063/1.4789389 ↗
4. X. Lu and D.T. Morelli, Phys. Chem. Chem. Phys. 15, 5762 (2013).10.1039/c3cp50920f ↗
5. K. Suekuni, F.S. Kim, and T. Takabatake, J. Appl. Phys. 116, 063706 (2014).10.1063/1.4892593 ↗
6. K. Suekuni, F.S. Kim, H. Nishiate, M. Ohta, H.I. Tanaka, and T. Takabatake, Appl. Phys. Lett. 105, 132107 (2014).10.1063/1.4896998 ↗
7. N. Tsujii, J. Electron. Mater. 42, 1974 (2013).10.1007/s11664-013-2485-3 ↗
8. N. Tsujii and T. Mori, Appl. Phys. Express 6, 043001 (2013).10.7567/APEX.6.043001 ↗
9. N. Tsujii, T. Mori, and Y. Isoda, J. Electron. Mater. 43, 2371 (2014).10.1007/s11664-014-3072-y ↗
10. R. Ang, A.U. Khan, N. Tsujii, K. Takai, R. Nakamura, and T. Mori, Angew. Chem. Int. Ed. 54, 12909 (2015).
11. W. Liu, Z. Ren, and G. Chen, Thermoelectric Nanomaterials, ed. K. Koumoto and T. Mori (Springer, Heidelberg, 2013).
12. B. Poudel, Q. Hao, Y. Ma, Y. Lan, A. Minnich, B. Yu, X. Yan, D. Wang, A. Muto, D. Vashaee, X. Chen, J. Liu, M.S. Dresselhaus, G. Chen, and Z. Ren, Science 320, 634 (2008).10.1126/science.1156446 ↗
13. Y. Lan, A.J. Minnich, G. Chen, and Z. Ren, Adv. Funct. Mater. 20, 357 (2010).10.1002/adfm.200901512 ↗
14. W. Liu, X. Yan, G. Chen, and Z. Ren, Nano Energy 1, 42 (2012).10.1016/j.nanoen.2011.10.001 ↗
15. G. Rogl, P. Rogl, E. Bauer, and M. Zebetbause, Thermoelectric Nanomaterials, ed. K. Koumoto and T. Mori (Springer, Berlin, 2013).
16. F. Meng, K. Tsuchiya, S. Ii, and Y. Yokoyama, Appl. Phys. Lett. 101, 121914 (2012).10.1063/1.4753998 ↗
17. D.N.A. Shri, K. Tsuchiya, and A. Yamamoto, Appl. Surf. Sci. 289, 338 (2014).10.1016/j.apsusc.2013.10.161 ↗
18. N. Tsujii and T. Mori, J. Jpn. Soc. Powder Powder Metall. 61, 18 (2014).
19. A. Kosuga, K. Umekage, M. Matsuzawa, Y. Sakamoto, and I. Yamada, Inorg. Chem. 53, 6844 (2014).10.1021/ic500688d ↗
20. D.J. Vaughan and J.A. Tossell, Science 179, 375 (1973).10.1126/science.179.4071.375 ↗