Rheological Behavior of Thermal Interface Pastes
Source abstract
Abstract
Polyol-ester-based thermal pastes containing carbon black, fumed alumina or nanoclay exhibit Bingham plastic behavior with shear thinning. Carbon black gives double yielding, but fumed alumina and nanoclay give single yielding. The plastic viscosity increases with the solid content. Antioxidants increase the plastic viscosity and yield stresses. Nanoclay (1.0 vol.%) gives low shear moduli, high critical shear strain, and high loss tangent, thus resulting in low bond-line thickness and high thermal contact conductance for smooth (0.009 lm) proximate surfaces. Carbon black (Tokai, 8.0 vol.%) gives high moduli, low critical strain, and low loss tangent, thus resulting in high bondline thickness, though the high thermal conductivity due to the high solid content results in high thermal contact conductance for rough (15 lm) proximate surfaces. Antioxidants enhance the solid-like character, increase the yield stress, plastic viscosity, and bond-line thickness, and decrease the thermal contact conductance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. E.G. Wolff and D.A. Schneider, Int. J. Heat Mass Transf. 41, 3469 (1998).10.1016/S0017-9310(98)00067-2 ↗
2. T. Ouellette and M. Sorgo, Proceedings of the Power Electronics Design Conference, Power Sources Users Conference, Cerritos, CA (1985), pp. 134–138.
3. M.R. Vogel, Proceedings of the International Intersociety of Electronic Packaging Conference, Advances in Electronic Packaging, vol. 10–2 (American Society of Mechanical Engineers, 1995), p. 989.
4. V. Sartre and M. Lallemand, Appl. Therm. Eng. 21, 221 (2001).10.1016/S1359-4311(00)00034-X ↗
5. M. Grujicic, C.L. Zhao, and E.C. Dusel, Appl. Surf. Sci. 246, 290 (2005).10.1016/j.apsusc.2004.11.030 ↗
6. D.D.L. Chung, J. Mater. Eng. Perform. 10, 56 (2001).10.1361/105994901770345358 ↗
7. N.G. Aakalu and L.A. Rittmiller, U.S. patent 4,265,775 (5 May 1981).
8. R. Anderson and R.B. Booth, IEEE Trans. Component. Hybrid. Manuf. Technol. 13, 713 (1990).10.1109/33.62584 ↗
9. S. Iruvanti, R.K. Gupta, and E. Ruckenstein, U.S. patent 5,098,609 (24 March 1992).
10. S. Iruvanti, K.S. Olsen, and K.G. Sachdev, U.S. patent 5,591,789 (7 January 1997).
11. Y. Xu, X. Luo, and D.D.L. Chung, J. Electron. Packag. 124, 188 (2002).10.1115/1.1477191 ↗
12. C.-K. Leong and D.D.L. Chung, Carbon 41, 2459 (2003).10.1016/S0008-6223(03)00247-1 ↗
13. C.-K. Leong and D.D.L. Chung, Carbon 42, 2323 (2004).10.1016/j.carbon.2004.05.013 ↗
14. C.-K. Leong, Y. Aoyagi, and D.D.L. Chung, J. Electron. Mater. 34, 1336 (2005).10.1007/s11664-005-0259-2 ↗
15. C.-K. Leong, Y. Aoyagi, and D.D.L. Chung, Carbon 44, 435 (2006).10.1016/j.carbon.2005.09.002 ↗
16. C. Lin and D.D.L. Chung, Carbon 45, 2922 (2007).10.1016/j.carbon.2007.10.006 ↗
17. A. Yu, P. Ramesh, M.E. Itkis, E. Bekyarova, and R.C. Haddon, J. Phys. Chem. C 111, 7565 (2007).10.1021/jp071761s ↗
18. C. Lin and D.D.L. Chung, Carbon 47, 295 (2009).10.1016/j.carbon.2008.10.011 ↗
19. C. Lin and D.D.L. Chung, J. Mater. Sci. 42, 9245 (2007).10.1007/s10853-007-1911-4 ↗
20. C. Lin and D.D.L. Chung, J. Electron. Mater. 37, 1698 (2008).10.1007/s11664-008-0538-9 ↗
21. C. Lin, T.A. Howe, and D.D.L. Chung, J. Electron. Mater. 36, 659 (2007).10.1007/s11664-007-0116-6 ↗
22. Y. Aoyagi and D.D.L. Chung, J. Mater. Sci. 42, 2358 (2007).10.1007/s10853-007-1600-3 ↗
23. R. Prasher, J. Shipley, S. Prstic, P. Koning, and J.-L. Wang, ASME, Heat Transfer Div. HTD 372, 47 (2002).
24. C. Feger, J.D. Gelorme, M. McGlashan-Powell, and D.M. Kalyon, J. Res. Dev. 49, 699 (2005).
25. C.L. Barrie, P.C. Griffiths, R.J. Abbott, I. Grillo, D. Kudryashov, and C. Smyth, J. Colloid Interface Sci. 272, 210 (2004).10.1016/j.jcis.2003.12.004 ↗
26. C.W. Macosko, Rheology Principles, Measurements and Applications (USA: Wiley-VCH, 1994).
27. A.J. Franck, Application of Rheology of Polymers, TA Instruments, http://www.tainstruments.com/library_download.aspx?file=AAN016_V1_U_StructFluids.pdf , as on May, 2009.
28. S. Aoshima, Wax Crystal Control—Nanocomposites— Stimuli-Responsive Polymers (Advances in Polymer Science) (Springer, Berlin, 2007).
29. Y. Lee, B. Chae, A. Lane, and J. Wiest, Colloids Surf. A Physicochem. Eng. Asp. 224, 23 (2003).10.1016/S0927-7757(03)00265-6 ↗
30. P. Herh, J. Tkachuk, S. Wu, M. Bernzen, and B. Rudolph, Am. Lab. July, 12 (1998).
31. N.P. Cheremisinoff, Polymer Mixing and Extrusion Technology, 1st ed. (Boca Raton, FL: CRC, 1987), p. 77.
32. J.C. Salamone, Polymeric Materials Encyclopedia, 1st ed. (Boca Raton, FL: CRC, 1996), p. 6616.
33. A.V. Shenoy, Rheology of Filled Polymer Systems (Norwell, MA: Kluwer Academic, 1999), p. 80.10.1007/978-94-015-9213-0 ↗
34. Y. Zhong and S. Wang, J. Rheol. 47, 483 (2003).10.1122/1.1545074 ↗
35. C. Lin and D.D.L. Chung, Nanostructured Thermal Interface Pastes for Microelectronic Cooling Proc. Fall Technical Conference (SAMPE, Memphis, TN, Sept. 2008).
36. P. Pour Shahid Saeed Abadi, C.-K. Leong, and D.D.L. Chung, Electron. Mater. 38, 175 (2009).10.1007/s11664-008-0563-8 ↗