Performance Analysis of a Thermoelectric Solar Collector Integrated with a Heat Pump
Source abstract
Abstract
A novel heat pump system is proposed. A thermoelectric solar collector was coupled to a solar-assisted heat pump (TESC-HP) to work as an evaporator. The cooling effect of the system’s refrigerant allowed the cold side of the system’s thermoelectric modules to work at lower temperature, improving the conversion efficiency. The TESC-HP system mainly consisted of transparent glass, an air gap, an absorber plate that acted as a direct expansion-type collector/evaporator, an R-134a piston-type hermetic compressor, a water-cooled plate-type condenser, thermoelectric modules, and a water storage tank. Test results indicated that the TESC-HP has better coefficient of performance (COP) and conversion efficiency than the separate units. For the meteorological conditions in Mahasarakham, the COP of the TESC-HP system can reach 5.48 when the average temperature of 100 L of water is increased from 28°C to 40°C in 60 min with average ambient temperature of 32.5°C and average solar intensity of 815 W/m2, whereas the conversion efficiency of the TE power generator was around 2.03%.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Solar Thermal and Photovoltaic Systems · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Y.H. Kuang and R.Z. Wang, Sol. Energy 80, 795 (2006).10.1016/j.solener.2005.06.003 ↗
2. V. Leonov, T. Torfs, R.J.M. Vullers, and C.V. Hoof, J. Electron. Mater. 39, 1647 (2010).10.1007/s11664-010-1230-4 ↗
3. G. Casano and S. Piva, Exp. Thermal Fluid Sci. 35, 660 (2011).10.1016/j.expthermflusci.2010.12.016 ↗
4. G. Xu, S. Deng, X. Zhang, L. Yang, and Y. Zhang, Sol. Energy 83, 1967 (2009).10.1016/j.solener.2009.07.008 ↗
5. J. Ji, H. He, T. Chow, G. Pei, W. He, and K. Liu, Inter. J. Heat Mass Trans. 52, 1365 (2009).10.1016/j.ijheatmasstransfer.2008.08.017 ↗
6. G. Fang, H. Hu, and X. Liu, Exp. Thermal Fluid Sci. 34, 736 (2010).10.1016/j.expthermflusci.2010.01.002 ↗
7. S. Pattanasethanon, C. Lertsatitthanakorn, S. Atthajariyakun, and S. Soponronnarit, Energy Convers. Manage. 49, 1999 (2008).10.1016/j.enconman.2008.02.014 ↗
8. T.T. Chow, G. Pei, K.F. Fong, Z. Lin, A.L.S. Chan, and M. He, Appl. Energy 87, 643 (2010).10.1016/j.apenergy.2009.05.036 ↗
9. Y. Vorobiev, J. Gonzalez-Hernandez, P. Vorobiev, and L. Bulat, Sol. Energy 80, 170 (2006).10.1016/j.solener.2005.04.022 ↗
10. B.R. Peterson, Trans. ASME J. Eng. Gas Turbine Power 129, 1106 (2007).10.1115/1.2747261 ↗
11. W.E. Miller, J.T. Hendricks, J.T., and B.R. Peterson, J. Electron. Mater. 38, 1206 (2009).
12. C. Lertsatitthanakorn, A. Theryothin, and S. Soponronnarit, Proc. Inst. Mech. Eng. Part A J. Power Energy. 224, 621 (2010).