Effect of Excess Li Content on the Microwave Dielectric Properties of the M-Phase of Li2O-Nb2O5-TiO2 Ceramics
Source abstract
Abstract
The effects of excess Li content on the phase structure and microwave dielectric properties, especially on the temperature coefficient, of LiNb0.6 Ti0.5O3 (LNT) ceramics were studied. The results show that small amounts of Li effectively enhanced the sintering process due to the compensation of high volatility of Li, leading to a densification and homogenous microstructure, and therefore enhanced the dielectric properties. However, too much Li leads to a secondary phase and cause abnormal grain growth. The LNT + 5 wt.% Li ceramic sintered at 1075°C in the air shows the best properties of e r = 69.73, Q × f = 5543 GHz, and τ f = −4.4 ppm/°C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microwave Dielectric Ceramics Synthesis · Ferroelectric and Piezoelectric Materials · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. H. Hughes and I. Mddles, Appl. Phys. Lett. 79, 2952 (2001).10.1063/1.1414296 ↗
2. C. Cheng, T. Hsieh, and I. Lin, J. Eur. Ceram. Soc. 23, 2553 (2003).10.1016/S0955-2219(03)00166-3 ↗
3. H. Jantunena, R. Rautioahob, A. Uusimakia, and S. Leppavuori, J. Eur. Ceram. Soc. 20, 2331 (2000).10.1016/S0955-2219(00)00145-X ↗
4. C. Lo, J. Duh, B. Chiou, and W. Lee, J. Am. Ceram. Soc. 85, 2230 (2002).10.1111/j.1151-2916.2002.tb00440.x ↗
5. W. Lei, W. Lu, X. Wang, and S. Wan, J. Alloy Comp. 508, 507 (2010).10.1016/j.jallcom.2010.08.104 ↗
6. M.E. Villafuerte-Castrejon, A. Aragon-Pina, R. Valenzuela, and A.R. West, J. Solid State Chem. 71, 103 (1987).10.1016/0022-4596(87)90147-2 ↗
7. A.Y. Borisevich and P.K. Davies, J. Am. Ceram. Soc. 85, 573 (2002).10.1111/j.1151-2916.2002.tb00134.x ↗
8. X. Chen, H. Zhou, L. Fang, D. Chu, C. Li, R. Guo, and H. Wang, J. Mater. Sci. Mater. Electron. 22, 371 (2011).10.1007/s10854-010-0145-4 ↗
9. Y. Long, Y. Li, Y. Wang, and W. Wu, J. Alloy. Compd. 475, 546 (2009).10.1016/j.jallcom.2008.07.066 ↗
10. H. Zhou, H. Wang, D. Zhou, L. Pang, and X. Yao, Mater. Chem. Phys. 109, 510 (2008).10.1016/j.matchemphys.2007.12.027 ↗
11. Q. Zeng, W. Li, J. Shi, J. Guo, H. Chen, and M. Liu, J. Eur. Ceram. Soc. 27, 261 (2007).10.1016/j.jeurceramsoc.2006.04.174 ↗
12. Y. Long, Y. Wang, W. Wu, D. Wang, and Y. Li, J. Am. Ceram. Soc. 92, 2630 (2009).10.1111/j.1551-2916.2009.03246.x ↗
13. Q. Zeng, W. Li, and J. Shi, J. Am. Ceram. Soc. 89, 1733 (2006).10.1111/j.1551-2916.2006.00942.x ↗
14. Q. Zeng, W. Li, J. Shi, and J. Guo, Phys. Status Solid. 203, 91 (2006).10.1002/pssa.200622301 ↗
15. P. Zhang, L. Li, G. Li, and W. Zhang, J. Mater. Sci. Mater. Electron. 21, 213 (2010).10.1007/s10854-009-9894-3 ↗
16. Z. Liu, Y. Wang, W. Wu, and Y. Li, J. Am. Ceram. Soc. 1, 2 (2013).10.1016/j.jascer.2013.02.002 ↗
17. P. Bordet, E. Moshopoulou, S. Liesert, and J.J. Capponi, Phys. C 235, 745 (1994).10.1016/0921-4534(94)91597-0 ↗