journal article·2000-06

Surface leakage current analysis of ion implanted ZnS-passivated n-on-p HgCdTe diodes in weak inversion

Young-Ho Kim, Soo-Ho Bae, Hee Chul Lee, Choong Ki Kim

Journal of Electronic Materials· Volume 29· Issue 6
Publisher page

Abstract

Effects of fixed charge on R0A value of ZnS-passivated x=0.3 HgCdTe n-on-p diode are explained as a shunt resistance that affects current-voltage (I-V) and dynamic resistance-voltage (Rd-V) characteristics. The fixed charge of 1×1011/cm2 to 2 × 1011/cm2 which is usually obtained with ZnS passivation makes the surface weakly inverted and reduces HgCdTe diode R0A value owing to the short generation lifetime of HgCdTe substrate. The gate-controlled diode and specially fabricated diode are used to explain the surface leakage current in the weak inversion and charge sheet model is used to explain the characteristics. It is found that the surface leakage current by the inverted channel in the weak inversion can reduce R0A more than other currents such as the generation current and tunneling current which are usually used to explain the surface leakage current of HgCdTe diode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Semiconductor Detectors and Materials · Semiconductor Quantum Structures and Devices · Integrated Circuits and Semiconductor Failure Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. V. Gopal and and V. Dhar, IEEE Trans. Electron Devices 33, 1489 (1986).10.1109/T-ED.1986.22698 ↗
2. R.K. Willardson and A.C. Beer, editors, Semiconductors and Semimetals, 18, 207 (1981).10.1016/S0080-8784(08)62759-3 ↗
3. Y. Nemirovski, D. Rosenfeld, R. Adar, and A. Kornfeld, J. Vac. Sci. Technol. A 7, 528 (1989).10.1116/1.576215 ↗
4. R.K. Bhan and Vishnu Gopal, Semicond. Sci. Technol. 9, 289 (1994).10.1088/0268-1242/9/3/009 ↗
5. J.A. Wilson, V.A. Cotton, J. Silberman, D. Laser, W.E. Spicer, and P. Morgan, J. Vac. Sci. Technol. A1, 1719 (1983).10.1116/1.572215 ↗
6. B.K. Janousek, R.C. Carscallen, and P.A. Bertrand, J. Vac. Sci. Technol. A1, 1723 (1983).10.1116/1.572216 ↗
7. J. A. Wilson and V.A. Cotton, J. Vac. Sci. Technol. A 3, 199 (1985).10.1116/1.573200 ↗
8. N. Kajihara, G. Sudo, Y. Miyamoto, and K. Tanokawa, J. Electrochem. Soc. 135, 1252 (1988).10.1149/1.2095943 ↗
9. Y. Nemirovsky, J. Vac. Sci. Technol. A8, 1185 (1990).10.1116/1.576942 ↗
10. Y. Nemirovsky and G. Bahir, J. Vac. Sci. Technol. A7, 450 (1989).10.1116/1.576202 ↗
11. S.H. Lee, S.H. Bae, H.C. Lee, and C.K. Kim, J. Electron. Mater. 27, 6 (1998).10.1007/s11664-998-0338-2 ↗
12. S. Wolf, Silicon Processing, vol. 3 (Lattice Press, 1995), p. 112.
13. L.F. Lou and W.H. Frye, J. Appl. Phys. 56, 2253 (1984).10.1063/1.334259 ↗
14. M.H. Weiler and G.J. Tarnowski, J. Electron. Mater. 26, 635 (1997).10.1007/s11664-997-0208-3 ↗
15. V. Ariel, V. Garber, D. Rosenfeld, and G. Bahir, J. Electron. Mater 24, 1169 (1995).10.1007/BF02653070 ↗