journal article·2007-02-08

Phase-Change Memory Device Using Si-Sb-Te Film for Low Power Operation and Multibit Storage

Baowei Qiao, Jie Feng, Yunfeng Lai, Yanfei Cai, Yinyin Lin, Tingao Tang, Bingchu Cai, Bomy Chen

Journal of Electronic Materials· Volume 36· Issue 1
Publisher page

Abstract

The switching characteristics of the electrical phase-change memory device using a SiSbTe film were studied. The SiSbTe film has a wider variation of electrical resistivity (up to 107 times) along with crystallization than that of the conventionally used Ge2Sb2Te5 film, and the SiSbTe film crystallizes predominantly into the hexagonal phase in a manner similar to the Sb2Te3 phase. The threshold voltage of the device is 5.87 V. The device was successfully operated with a 100 ns–5.5 V pulse for setting and a 20 ns–3 V pulse for resetting. The RESET current is about 1.37 mA, and the programming energies for resetting and setting are about 110 pJ and 60 pJ, respectively. More than 100 cycles were achieved with a RESET/SET resistance ratio higher than 50. In addition, multiple stable resistance stages can be obtained by adjusting the SET pulse, which makes multibit storage per cell possible.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Phase-change materials and chalcogenides · Transition Metal Oxide Nanomaterials · Chalcogenide Semiconductor Thin Films

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Lai S. and Lowrey T. (2001) IEDM Tech. Dig., p. 36.5.1
2. Tyson S., Wicker G., Lowrey T., Hudgens S., Hunt K. (2000) IEEE Aerospace Conf Proc 5:385
3. Maimon J., Spall E., Quinn R., Schnur S. (2001) IEEE Aerospace Conf Proc 5:2289
4. Koh G.H., et al. (2004) IEEE Int. Conf. Integrated Circuit Design and Technology. Piscataway, NJ: IEEE, p. 53
5. Lee S.Y., Kim K. (2004) IEEE Int. Conf. on Integrated Circuit Design and Technology. Piscataway, NJ: IEEE, p. 45
6. Lee H., Kang D., Tran L. (2005) Mater Sci Eng B-Solid 119:19610.1016/j.mseb.2005.02.060 ↗
7. Nakayama K., Kojima K., Hayakawa F., Imai Y., Kitagawa A., Suzuki M. (2000) Jpn J Appl Phys 39:615710.1143/JJAP.39.6157 ↗
8. Nakayama K., Kojima K., Imai Y., Kasai T., Fukushima S., Kitagawa A., Kumeda M., Kakaimoto Y., Suzuki M. (2003) Jpn J Appl Phys 42:40410.1143/JJAP.42.404 ↗
9. Horii H., et al., (2003) Symp VLSI Tech Dig p. 177
10. Lai Y., Qiao B., Feng J., Ling Y., Lin Y., Tang T., Cai B., Chen B. (2005) J Electron Mater 34:17610.1007/s11664-005-0230-2 ↗
11. Lankhorst M.H.R., Ketelaars B.W.S.M.M., Wolters R.A.M. (2005) Nat Mater 4:34710.1038/nmat1350 ↗
12. Qiao B., Lai Y., Feng J., Ling Y., Lin Y., Tang T., Cai B., Chen B. (2005) J Mater Sci Technol 21:95
13. Hwang Y.N., et al., (2003) IEDM Tech Dig p. 37.1.110.1002/mop.10927 ↗
14. Pirovano A., Lacaita A.L., Benvenuti A., Pellizzer F., Hudgens S., and Bez R. (2003) IEDM Tech Dig p. 29.6.1
15. Ovshinsky S.R., Ye Q.Y., and Strand D.A., U.S. Patent 5406509