Effect of High-Humidity Testing on Material Parameters of Flexible Printed Circuit Board Materials
Source abstract
Abstract
The tendency of polymers to absorb moisture impairs especially their electrical and mechanical properties. These are important characteristics for printed circuit board (PCB) materials, which should provide mechanical support as well as electrical insulation in many different environments in order to guarantee safe operation for electrical devices. Moreover, the effects of moisture are accelerated at increased temperatures. In this study, three flexible PCB dielectric materials, namely polyimide (PI), fluorinated ethylene-propylene (FEP), and polyethylene terephthalate (PET), were aged over different periods of time in a high-humidity test, in which the temperature was 85°C and relative humidity 85%. After aging, the changes in the structure of the polymers were studied by determining different material parameters such as modulus of elasticity, glass-transition temperature, melting point, coefficient of thermal expansion, water absorption, and crystallinity, and changes in the chemical structure with several techniques including thermomechanical analysis, differential scanning calorimetry, Fourier-transform infrared spectroscopy, moisture analysis, and a precision scale. The results showed that PI was extremely stable under the aging conditions and therefore an excellent choice for electrical applications under harsh conditions. Similarly, FEP proved to be relatively stable under the applied aging conditions. However, its crystallinity increased markedly during aging, and after 6000 h of aging the results indicated oxidation. PET suffered from hydrolysis during the test, leading to its embrittlement after 2000 h of aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Material Properties and Processing · Advanced Sensor and Energy Harvesting Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. J.A. Scarlett, The Multilayer Printed Circuit Board Handbook (Ayr: Electrochemical, 1995).
2. C.F. Cooms Jr, Printed Circuit Handbook, 5th ed. (New York, NY: McGraw Hill, 2001).
3. M. Goosey, Plastics for Electronics, 2nd ed. (The Netherlands: Kluwer, 1999).10.1007/978-94-017-2700-6 ↗
4. D. Lu and C.P. Wong, Materials for Advanced Packaging (New York: Springer Science + Business Media, 2010).
5. R. L. Shook, D.L. Gerlach, and B.T. Vaccaro, Proceedings of Electronic Components and Technology Conference, 2001, pp. 74–79.
6. K. Weide-Zaage, W. Horaud, and H. Frémont, Microelectron. Reliab. 45, 1662 (2005).10.1016/j.microrel.2005.07.077 ↗
7. X. Han, D.C. Janzen, J. Vaillancourt, and X. Lu, IET Micro Nano Lett. 2, 96 (2007).10.1049/mnl:20070033 ↗
8. Q. Cao, H. Kim, N. Pimparkar, J.P. Kulkarni, C. Wang, M. Shim, K. Roy, M.A. Alam, and J.A. Rogers, Nano Lett. 454, 495 (2008).
9. X.J. Fan and S.W.R. Lee, Polymeric Materials in Electronic Packaging, ed. X.J. Fan and E. Suhir (New York, NY: Springer Science + Business Media, 2010),
10. X. Fan, J. Zhou, and A. Chandra, Proceedings of Electronic Components and Technology Conference, 2008, pp. 1054–1066.
11. H. Walter, E. Dermitzaki, B. Wunderle, and B. Michel, Proceedings of Electronic System-Integration Technology Conference, 2010, pp. 1–5.10.1109/ESTC.2010.5643018 ↗
12. V. Shah, Handbook of Plastics Testing Technology, 2nd ed. (New York, NY: Wiley, 1998).
13. D.D. Denton, M.C. Buncick, and H. Pranjoto, J. Mater. Res. 6, 2747 (1991).10.1557/JMR.1991.2747 ↗
14. M.C. Buncick and D.D. Denton, Proceedings of Solid-State Sensor and Actuator Workshop, 1990, pp. 102–106.10.1109/SOLSEN.1990.109830 ↗
15. A. Ralston, M.C. Buncick, D.D. Denton, T. Boltshauser, J. Funk, and H. Baltes, Proceedings of Solid-State Sensors and Actuators Conference, 1991, pp. 759–763.
16. M. Tsukiji and W. Bitoh, Proceedings of International Symposium on Electrical Insulation, 1990, pp. 88–91.10.1109/ELINSL.1990.109715 ↗
17. S. Diaham, M.L. Locatelli, and T. Lebey, Proceedings of Conference on Electrical Insulation Dielectric Phenomena, 2008, pp. 79–82.
18. V. Bellenger, M. Ganem, B. Mortaigne, and J. Verdu, Polym. Degrad. Stab. 49, 91 (1995).10.1016/0141-3910(95)00049-R ↗
19. B. Fayolle, X. Colin, L. Audouin, and J. Verdu, Polym. Degrad. Stab. 92, 231 (2007).10.1016/j.polymdegradstab.2006.11.012 ↗
20. A. Launay, F. Thominette, and J. Verdu, Polym. Degrad. Stab. 63, 385 (1999).10.1016/S0141-3910(98)00116-5 ↗
21. G. Oreski and G.M. Wallner, Sol. Energy 79, 612 (2005).10.1016/j.solener.2005.02.008 ↗
22. B. Fayolle, L. Audoin, and J. Verdu, Polymer 44, 2773 (2003).10.1016/S0032-3861(03)00116-2 ↗
23. Electronic Industries Association. JEDEC Standard. Steady State Temperature Humidity Bias Life Test. JESD22-A101C. USA 2009.
24. J.D. Menczel and R.B. Prime, Thermal Analysis of Polymers—Fundamentals and Applications (Chichester: Wiley, 2009).10.1002/9780470423837 ↗
25. W.G. Ehrenstei, G. Riedel, and P. Trawiel, Thermal Analysis of Plastics—Theory and Practise (Munich: Carl Hanser, 2004).10.3139/9783446434141 ↗
26. J. Van Turnhout, P. Klaase, P.H. Ong, and L.C.E. Struik, J. Electrostat. 3, 171 (1977).10.1016/0304-3886(77)90088-2 ↗
27. P. Lall, M.G. Pecht, and E.B. Hakim, Influence of Temperature on Microelectronics and System Reliability (New York: CRC, 1997).
28. H. Fan, Proceedings of Electronic Components and Technology Conference, 2007, pp. 1375–1383.
29. Patent Storm LLC, Fluoropolymer Compositions, http://www.patentstorm.us/patents/5317061/description.html .
30. Y. Kong and J.N. Hay, Polymer 44, 623 (2003).10.1016/S0032-3861(02)00814-5 ↗
31. C.A. Avila-Orta, F.J. Medellín-Rodríguez, Z. Wang, D. Navarro-Rodríguez, B.S. Hsiao, and F. Yeh, Polymer 44, 1527 (2003).10.1016/S0032-3861(02)00832-7 ↗
32. G. Güçlü, T. Yalçınyuva, S. Özgümüş, and M. Orbay, Thermochim. Acta 404, 193 (2003).10.1016/S0040-6031(03)00160-6 ↗
33. G. Qui, Z. Tang, N. Huang, and L. Gerking, J. Appl. Polym. Sci. 69, 729 (1998).10.1002/(SICI)1097-4628(19980725)69:4<729::AID-APP11>3.0.CO;2-K ↗
34. H. Sun, L. Zhang, H. Chai, and H. Chen, Desalination 192, 271 (2006).10.1016/j.desal.2005.07.038 ↗
35. C. Sammon, J. Yarwood, and N. Everall, Polym. Degrad. Stab. 67, 149 (2006).10.1016/S0141-3910(99)00104-4 ↗
36. T. Hase, Tables for Organic Spectrometry, 7th ed. (Helsinki: Otatieto, 2001).
37. L. Frisk and A. Cumini, Solder. Surf. Mt. Technol. 18, 12 (2006).10.1108/09540910610717866 ↗
38. L. Frisk, A. Parviainen, and K. Kokko, Proceedings of Electronics System Integration Technology Conference, 2010, pp. 1–6.10.1109/ESTC.2010.5642913 ↗
39. D.R. Falconi, R.A.C. Altafim, R.A.P. Altafim, and H.C. Basso, Proceedings of Electrical Insulation and Dielectric Phenomena Conference, 2011, pp. 137–140.
40. S.L. Samuels, N.J. Glassmaker, G.A. Andrew, M.J. Brown, and M.E. Lewittes, Proceedings of Photovoltaic Specialists Conference, 2010, pp. 2788–2790.
41. J. Kiilunen and L. Frisk, Proceedings of IMAPS Nordic Conference, 2010, pp. 1–4.
42. K. Saarinen, L. Frisk, and L. Ukkonen, IEEE Trans. Reliab. 61, 23 (2012).10.1109/TR.2011.2182223 ↗
43. K. Saarinen and L. Frisk, Proceedings of Electronics Packaging Technology Conference, 2012.