Precision Manufacturing of NaNi1/3Mn1/3Co1/3O2 Cathodes: Study of Structure Evolution and Performance at Varied Calcination Temperatures
Source abstract
Abstract
In this paper, we have fabricated NaNi1/3Mn1/3Co1/3O2 cathodes using a hydroxide co-precipitation followed by a multi-step solid state process. The prepared cathodes were quenched at varied calcination temperatures cycles. Formation of P3 phase was observed at 600°C quenching temperature as confirmed by x-ray diffraction (XRD) studies. The transition from P3 phase to O3 phase was observed at higher temperature and complete transition occurred at 900°C with the formation of O3 phase. Rietveld Refinement was done to calculate the lattice parameters. Surface morphology of the prepared cells was studied by scanning electron microscopy. The prepared cells were tested for remaining capacity and Na+ concentrations after charging-discharging cycles. Multivariate adaptive regression splines (MARS) were used to determine the most optimal electrode fabrication conditions for good output from the batteries. The most optimized conditions for this set of experiments are T2 = 900°C, t2 = 48 h, T3 = 900°C, t3 = 6 h and number of cycles = 80 to obtain the highest remaining Na+ ion concentration and capacity. The proposed combined numerical and experimental framework provides a higher degree of automation with precision in experimental designs for electrode fabrication.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Advanced Battery Materials and Technologies · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. M.S. Whittingham, Chem. Rev. 104, 4271 (2004).10.1021/cr020731c ↗
2. G.L. Xu, Q. Wang, J.C. Fang, Y.F. Xu, L. Huang, and S.G. Sun, J. Mater. Chem. A 2, 19941 (2014).10.1039/C4TA03823A ↗
3. Z. Yang, J. Zhang, M.C.W. Kintner-Meyer, X. Lu, D. Choi, J.P. Lemmon, and J. Liu, Chem. Rev. 111, 3577 (2011).10.1021/cr100290v ↗
4. K. Kubota and S. Komaba, J. Electrochem. Soc. 162, A2538 (2015).10.1149/2.0151514jes ↗
5. N. Yabuuchi, K. Kubota, M. Dahbi, and S. Komaba, Chem. Rev. 114, 11636 (2014).10.1021/cr500192f ↗
6. H. Pan, Y.-S. Hu, and L. Chen, Energy Environ. Sci. 6, 2338 (2013).10.1039/c3ee40847g ↗
7. H. Yoshida, N. Yabuuchi, and S. Komaba, Electrochem. Commun. 34, 60 (2013).10.1016/j.elecom.2013.05.012 ↗
8. N. Yabuuchi, M. Yano, H. Yoshida, S. Kuze, and S. Komaba, J. Electrochem. Soc. 160, A3131 (2013).10.1149/2.018305jes ↗
9. S. Okada, Y. Takahashi, T. Kiyabu, T. Doi, J.-I. Yamaki, and T. Nishida, ECS Meet. Abstr. 2, 201 (2006).10.1149/MA2006-02/4/201 ↗
10. H. Moriwake, A. Kuwabara, C.A.J. Fisher, M. Nose, H. Nakayama, S. Nakanishi, H. Iba, and Y. Ikuhara, J. Power Sources 326, 220 (2016).10.1016/j.jpowsour.2016.07.006 ↗
11. G.L. Xu, R. Amine, A. Abouimrane, H. Che, M. Dahbi, Z.F. Ma, I. Saadoune, J. Alami, W.L. Mattis, F. Pan, Z. Chen, and K. Amine, Adv. Energy Mater. 8, 1702403 (2018).10.1002/aenm.201702403 ↗
12. M. Sathiya, K. Hemalatha, K. Ramesha, J.-M. Tarascon, and A.S. Prakash, Chem. Mater. 24, 1846 (2012).10.1021/cm300466b ↗
13. J.Y. Hwang, C.S. Yoon, I. Behlarouak, and Y.K. Sun, J. Mater. Chem. A 4, 17952 (2016).10.1039/C6TA07392A ↗
14. S. Sharma, A. Goyal, L. Gao, X. Niu, A. Garg, X. Meijuan, and J. Sandoval, Appl. Therm. Eng. 147, 545 (2019).10.1016/j.applthermaleng.2018.10.079 ↗
15. Y.H. Liu and Y.F. Luo, IEEE Trans. Ind. Electron. 57, 3963 (2010).10.1109/TIE.2009.2036020 ↗
16. A. Goyal and P.R. Soni, Optoelectron. Adv. Mater. Rapid Commun. 10, 855 (2016).
17. S.D. Oduro, S. Metia, H. Duc, G. Hong, and Q.P. Ha, Vis. Eng. 3, 13 (2015). https://doi.org/10.1186/s40327-015-0024-4 .10.1186/s40327-015-0024-4 ↗
18. J. Xia, R. Petibon, A. Xiao, W.M. Lamanna, and J.R. Dahn, J. Electrochem. Soc. 163, A1637 (2016).10.1149/2.0831608jes ↗
19. J. Meng, G. Luo, E. Breaz, and F. Gao, IECON 2015—41st Annual Conference of the IEEE Industrial Electronics Society (2015). https://doi.org/10.1109/iecon.2015.739226410.1109/iecon.2015.7392264 ↗
20. J.C.A. Anton, P.J.G. Nieto, F.J.C. Juez, F.S. Lasheras, C.B. Viejo, and N.R. Guttierrez, IEEE Trans. Power Electron. 28, 3798 (2013).10.1109/TPEL.2012.2230026 ↗
21. X. Xia, W. Xu, X. Bai, X. Rui, H. Wang, J. Forster, Y. Wang, X. Zhao, X. Kong, and T. Liang, ISGT 2014 (2014). https://doi.org/10.1109/isgt.2014.681639910.1109/isgt.2014.6816399 ↗
22. J.Y. Hwang, S.M. Oh, S.T. Myung, K.Y. Chung, and I. Behlarouak, Nat. Commun. 6, 6865 (2015). https://doi.org/10.1038/ncomms7865 .10.1038/ncomms7865 ↗
23. Handbook of Inorganic Chemicals, Pradniak, Pradyot (McGraw-Hill Publications, 2002)
24. S. Ivanova, E. Zhecheva, R. Kukeva, G.T. Tyuliev, D. Nihtianova, L. Mihaylov, and R. Stoyanova, J. Phys. Chem. C 120, 3654 (2016). https://doi.org/10.1021/acs.jpcc.5b11910 .10.1021/acs.jpcc.5b11910 ↗
25. A. Garg, K. Shankhwar, D. Jiang, V. Vijaya Raghavan, B.N. Panda, and S.S. Panda, Neural Comput. Appl. 29, 1233 (2018).10.1007/s00521-016-2632-x ↗
26. L. Shui, F. Chen, A. Garg, X. Peng, N. Bao, and J. Zhang, Struct. Multidiscip. Optim. 58, 331 (2018).10.1007/s00158-018-1901-y ↗
27. A. Garg, X. Peng, M.L.P. Le, K. Pareek, and C.M.M. Chin, Measurement 120, 114 (2018).10.1016/j.measurement.2018.02.003 ↗