Interfacial Microstructure Evolution and Shear Behavior of Au-Sn/Ni-xCu Joints at 350°C
Source abstract
Abstract
Interfacial reaction and shear behavior of the joints between Au-29Sn (at.%) solder and Ni-xCu (x = 20 at.%, 40 at.%, 60 at.%, and 80 at.%) substrate alloys soldered at 350°C for various durations were investigated in this study. The results show that α(Au) is the common reaction product at the solder/substrate interfaces after a short-time reaction regardless of Cu content. As soldering goes on, another new Ni3Sn2 layer forms at the interface company with ordering of the α(Au) phase, AuCu I/Ni3Sn2 bi-layers formed at the Au-Sn/Ni-20Cu interface, or with AuCu III/Ni3Sn2 bi-layers at the Au-Sn/Ni-40Cu interface. If the content of Cu in the substrate is higher than 40 at.%, periodic layered structure and discontinuous Ni3Sn2 layers appear. In the couple of Au-Sn/Ni-60Cu, AuCu I + AuCu III/Ni3Sn2/α(Au) can be observed while AuCu3/Ni3Sn2/α(Au) forms in the couple of Au-Sn/Ni-80Cu. Shear fracture always occurs in the region near the Ni-20Cu substrate in Au-Sn/Ni-20Cu joints, whereas it appears in the reaction layer for the joint of higher Cu content. The shear strength of Au-Sn/Ni-60Cu and Au-Sn/Ni-80Cu joints achieves about 55 MPa as α(Au) phase forms but decreases remarkably due to pore formation after soldering for a long duration. Whereas, the shear strength of Au-Sn/Ni-40Cu joints can reach 62 MPa as the α(Au) phase forms at an early stage, and maintains above 52 MPa even soldered for a long duration because of the adequate thick α(Au) and AuCu III layer adjacent to substrate provides good bonding. The reason why the soldering joint of Au-Sn/Ni-40Cu possesses higher strength and a better stability exists is that high Ni concentration in α(Au) and the continuous Ni3Sn2 layer inhibit formation of Kirkendall pores.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. W. Liu, Y. Wang, Y. Ma, Q. Yu, and Y. Huang, Mater. Sci. Eng., A 651, 626 (2016).10.1016/j.msea.2015.11.025 ↗
2. W. Tang, A. He, Q. Liu, and D.G. Ivey, Acta Mater. 56, 5818 (2008).10.1016/j.actamat.2008.08.002 ↗
3. J.W. Ronnie Teo, G.Y. Li, M.S. Ling, Z.F. Wang, and X.Q. Shi, Thin Solid Films 515, 4340 (2007).10.1016/j.tsf.2006.07.170 ↗
4. V. Chidambaram, J. Hattel, and J. Hald, Mater. Design 31, 4638 (2010).10.1016/j.matdes.2010.05.035 ↗
5. J.-W. Yoon, H.-S. Chun, and S.-B. Jung, Mater. Sci. Eng., A 473, 119 (2008).10.1016/j.msea.2007.03.050 ↗
6. H.-K. Cheng, Y.-J. Lin, C.-M. Chen, K.-C. Liu, Y.-L. Wang, and T.-F. Liu, Metal. Mater. Trans. A 47, 3971 (2016).10.1007/s11661-016-3591-7 ↗
7. H. Flandorfer, U. Saeed, C. Luef, A. Sabbar, and H. Ipser, Thermochim. Acta 459, 34 (2007).10.1016/j.tca.2007.04.004 ↗
8. W. Villanueva, W.J. Boettinger, G.B. McFadden, and J.A. Warren, Acta Mater. 60, 3799 (2012).10.1016/j.actamat.2012.03.047 ↗
9. J.-W. Yoon, S.-W. Kim, and S.-B. Jung, J. Alloys Compd. 392, 247 (2005).10.1016/j.jallcom.2004.09.045 ↗
10. J.-W. Yoon, H.-S. Chun, B.-I. Noh, J.-M. Koo, J.-W. Kim, H.-J. Lee, and S.-B. Jung, Microelectro. Reliab. 48, 1857 (2008).10.1016/j.microrel.2008.09.008 ↗
11. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng., R 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
12. H.G. Song, J.W. Morris, and M.T. Mccormack, J. Electr. Mater. 29, 1038 (2000).10.1007/s11664-000-0170-9 ↗
13. H.-M. Chung, C.-M. Chen, C.-P. Lin, and C.-J. Chen, J. Alloys Compds. 485, 219 (2009).10.1016/j.jallcom.2009.06.018 ↗
14. H. Etschmaier, J. Novák, H. Eder, and P. Hadley, Intermetallics 20, 87 (2012).10.1016/j.intermet.2011.08.014 ↗
15. C.H. Lee, Y.M. Wong, C. Doherty, K.L. Tai, E. Lane, D.D. Bacon, F. Baiocchi, and A. Katz, J. Appl. Phys. 72, 3808 (1992).10.1063/1.352279 ↗
16. J.-W. Yoon, H.-S. Chun, J.-M. Koo, H.-J. Lee, and S.-B. Jung, Scripta Mater. 56, 661 (2007).10.1016/j.scriptamat.2006.12.031 ↗
17. X.W. Zhu, R.C. Wang, C.Q. Peng, X.F. Wei, and J. Peng, J. Mater. Sci. Mater. Electr. 25, 742 (2014).10.1007/s10854-013-1639-7 ↗
18. X.F. Wei, Y.K. Zhang, R.C. Wang, and Y. Feng, Microelectro. Reliab. 5, 748 (2013).
19. Z.X. Zhu, C.C. Li, L.L. Liao, C.K. Liu, and C.R. Kao, J. Alloys Compd. 671, 340 (2016).10.1016/j.jallcom.2016.02.065 ↗
20. V. Vuorinen, T. Laurila, T. Mattila, E. Heikinheimo, and J.K. Kivilahti, J. Electr. Mater. 36, 1355 (2007).10.1007/s11664-007-0251-0 ↗
21. A. Wierzbicka-Miernik, K. Miernik, J. Wojewoda-Budka, K. Szyszkiewicz, R. Filipek, L. Litynska-Dobrzynska, A. Kodentsov, and P. Zieba, Mater. Chem. Phys. 142, 682 (2013).10.1016/j.matchemphys.2013.08.022 ↗
22. T. Maeshima, H. Ikehata, K. Terui, and Y. Sakamoto, Mater. Des. 103, 106 (2016).10.1016/j.matdes.2016.04.068 ↗
23. H.-F. Lin, Y.-C. Chang, and C.-C. Chen, J. Electr. Mater. 43, 3333 (2014).10.1007/s11664-014-3232-0 ↗
24. K.C. Huang, F.S. Shieu, T.S. Huang, C.T. Lu, C.W. Chen, H.W. Tseng, S.L. Cheng, and C.Y. Liu, J. Electr. Mater. 39, 2403 (2010).10.1007/s11664-010-1346-6 ↗
25. H.Q. Dong, V. Vuorinen, T. Laurila, and M. Paulasto-Kröckel, CALPHAD 43, 61 (2013).10.1016/j.calphad.2013.10.001 ↗
26. H. Yu, V. Vuorinen, and J.K. Kivilahti, J. Electr. Mater. 36, 136 (2007).10.1007/s11664-006-0028-x ↗
27. H.Q. Dong, V. Vuorinen, X.M. Tao, T. Laurila, and M. Paulasto-Kröckel, J. Alloys Compds. 588, 449 (2014).10.1016/j.jallcom.2013.11.041 ↗
28. W.M. Chen, S.C. Yang, M.H. Tsai, and C.R. Kao, Scripta Mater. 63, 47 (2010).10.1016/j.scriptamat.2010.03.008 ↗
29. C.C. Chen and Y.T. Chen, J. Alloys Compd. 545, 28 (2012).10.1016/j.jallcom.2012.08.052 ↗
30. C.R. Kao and Y.A. Chang, Acta Metal. 41, 3463 (1993).10.1016/0956-7151(93)90226-I ↗
31. J. Wang, H.S. Liu, L.B. Liu, and Z.P. Jin, CALPHAD 32, 94 (2008).10.1016/j.calphad.2007.08.001 ↗
32. J. Wang, L.B. Liu, H.S. Liu, and Z.P. Jin, CALPHAD 31, 249 (2007).10.1016/j.calphad.2006.11.006 ↗
33. Y. Liu, L. Zhang, and D. Yu, J. Phase. Equilib. Diff. 30, 136 (2009).10.1007/s11669-009-9469-2 ↗