journal article·2016-12

The Intermetallic Compound Formation for the Wire Bond Between an Al Pad and Ag-xPd Alloy Wire

Wei-Hsiang Huang, Kwang-Lung Lin, Yu-Wei Lin, Yun-Kai Cheng

Journal of Electronic Materials· Volume 45· Issue 12
Publisher page

Abstract

Silver-palladium alloy wire has been shown as an economical and reliable substitute for gold wire in various applications in the electronic packaging industry. The success of wire bonding relies on the formation of an interfacial intermetallic compound (IMC). This study is aimed to investigate the formation behavior of IMCs between an Al pad and Ag-Pd alloy wire with various Pd concentrations of 1.0–6.0% for the as-bonded commercial Ag/Al joint. The interfacial IMCs were investigated with scanning electron microscopy and energy-dispersive x-ray spectroscopy. The IMCs formed are separate (Ag, Pd)2Al and (Ag, Pd)3Al2 for a Ag6Pd wire bond, while (Ag, Pd)2Al and (Ag, Pd)3Al2 are mixed for the other Ag(1–4.5)Pd alloy wire bonds. The thickness of the total IMC layer varies from 0.65 μm for Ag1Pd to 0.91 μm for Ag6Pd, yet a minimum of 0.44 μm exists for Ag3.5Pd. The compound formation behavior was found to correspond with the Ag–Al phase diagram. After pressure cooker tests, a less stable IMC (Ag, Pd)3Al formed at the AgxPd/Al interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. S.L. Khoury, D.J. Burkhard, D.P. Galloway, and T.S. Scharr, IEEE Trans. Compon. Hybrids Manuf. Technol. 13, 673 (1990).10.1109/33.62578 ↗
2. L. Gu, Q. Chen, J. Li, Z. Chen, J. Zhou, M. Du, and M. Chung, ECS Trans. 52, 747 (2013).10.1149/05201.0747ecst ↗
3. Q.J. Chen, A. Pagba, D. Reynoso, S. Thomas, H. J. Toc, in 12th Electronics Packaging Technology Conference (EPTC) (2010), p. 591.
4. J.C. Lin and J.Y. Chuang, JES 144, 1652 (1997).
5. S. Kaimori, T. Nonaka, and A. Mizoguchi, IEEE Trans. Adv. Packag. 29, 227 (2006).10.1109/TADVP.2006.872999 ↗
6. T. Uno, Microelectron. Reliab. 51, 88 (2011).10.1016/j.microrel.2010.04.014 ↗
7. T. Uno, Microelectron. Reliab. 51, 148 (2011).10.1016/j.microrel.2010.03.006 ↗
8. H.W. Hsueh, F.Y. Hung, T.S. Lui, and L.H. Chen, Microelectron. Reliab. 51, 2243 (2011).10.1016/j.microrel.2011.07.062 ↗
9. J.S. Cho, K.A. Yoo, and S.J. Hong, in 60th Electronic Components and Technology Conference (ECTC) (2010), p. 1541.
10. C. H. Cheng, H.L Hsiao, S.I Chu, Y.Y Shieh, C.Y Sun, and C. Peng, in 63rd Electronic Components and Technology Conference (ECTC) (2013), p. 1569.
11. M.R. Choi, H.G. Kim, T.W. Lee, Y.J. Jeon, Y.K. Ahn, K.W. Koo, Y.C. Jang, S.Y. Park, J.H. Yee, N.K. Cho, I.T. Kange, S. Kim, S.Z. Han, and S.H. Lim, Microelectron. Reliab. 55, 2306 (2015).10.1016/j.microrel.2015.07.038 ↗
12. Y.W. Lin, W.B. Ke, R.Y. Wang, I.S. Wang, Y.T. Chiu, K.C. Lu, K.L. Lin, and Y.S. Lai, Surf. Coat. Technol. 231, 599 (2013).10.1016/j.surfcoat.2012.07.033 ↗
13. J.W. Yoon, S.W. Kim, and S.B. Jung, Mater. Trans. 45, 727 (2004).10.2320/matertrans.45.727 ↗
14. A.J. McAlister, Bull. Alloy Phase Diagr. 8, 527 (1987).10.1007/BF02879428 ↗
15. T.H. Chuang, C.C. Chang, C.H. Chuang, J.D. Lee, and H.H. Tsai, IEEE Trans. Compon. Hybrids Manuf. Technol. 1, 3 (2013).
16. Y.C. Jang, S.Y. Park, H.D. Kim, Y.C. Ko, K.W. Koo, and M.R. Choi, in 16th Electronic Pack and Technology Conference (EPTC) (2014), p. 704.