Characterization and Modeling of Fine-Pitch Copper Ball Bonding on a Cu/Low-k Chip
Source abstract
Abstract
Cu ball bonding faces more challenges than Au ball bonding, for example, excessive deformation of the bond pad and damage of Cu/low-k structures, because of the much greater hardness of Cu free air balls. In this study, dynamic finite-element analysis (FEA) modeling with displacement control was developed to simulate the ball-bonding process. The three-dimensional (3D) FEA simulation results were confirmed by use of stress-measurement data, obtained by use of stress sensors built into the test chip. Stress comparison between two-dimensional (2D) and 3D FEA models showed the 2D plain strain model to be a reasonable and effective model for simulation of the ball-bonding process without loss of accuracy; it also saves computing resources. The 2D FEA model developed was then used in studies of a Cu/low-k chip to find ways of reducing Al bond pad deformation and stresses of low-k structures. The variables studied included Al pad properties, capillary geometry, bond pad design (Al pad thickness, Al pad coated with Ni layer), and the effect of ultrasonic bonding power.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. P. Chauhan, Z.W. Zhong, and M. Petch, J. Electron. Mater. 42, 2415 (2013).10.1007/s11664-013-2576-1 ↗
2. I. Qin, A. Shah, C. Huynh, M. Mayer, and Y. Zhou, Microelectron. Reliab. 51, 60 (2011).10.1016/j.microrel.2010.04.001 ↗
3. I. Jeon, Microelectron. Reliab. 43, 2055 (2003).10.1016/S0026-2714(03)00213-0 ↗
4. L. Shen, V. Gumaste, A. Poddar, and L. Nguyen, in Proceedings of 56th Electronic Components Technology Conference (2006), p. 145.
5. T.J.S. Anand, C.K. Yau, Y.S. Leong, L.W. Keat, and H.M. Ting, Curr. Appl. Phys. 13, 1674 (2013).10.1016/j.cap.2013.06.008 ↗
6. T.J.S. Anand, L.B. Huat, and C.K. Yau, Mater. Chem. Phys. 136, 638 (2012).10.1016/j.matchemphys.2012.07.036 ↗
7. W.Y. Yong, X. Zhang, T.C. Chai, A. Trigg, N.B. Jaafar, and G.Q. Lo, IEEE Trans. Comp. Packag. Manuf. Technol. 3, 328 (2013).10.1109/TCPMT.2012.2217141 ↗
8. C.-H. Cho, R.C. Jaeger, and J.C. Suhling, IEEE Sens. J. 8, 1455 (2008).10.1109/JSEN.2008.923575 ↗
9. M. Doelle, C. Peters, P. Ruthe, and O. Paul, J. Microelectromech. Syst. 15, 120 (2006).10.1109/JMEMS.2005.863702 ↗
10. B. Lemkea, M. Baumanna, P. Gieschkea, R. Baskaranb, and O. Paula, Sens. Actuator A 189, 488 (2013).10.1016/j.sna.2012.10.014 ↗
11. A. Shah, A. Rezvani, M. Mayer, Y. Zhou, J. Persic, and J.T. Moon, Microelectron. Reliab. 51, 67 (2011).10.1016/j.microrel.2010.06.002 ↗
12. A. Shah, M. Mayer, Y. Zhou, S.J. Hong, and J.T. Moon, Microelectron. Eng. 85, 1851 (2008).10.1016/j.mee.2008.05.035 ↗
13. A. Rezvani, A. Shah, M. Mayer, Y. Zhou, and J.T. Moon, Microelectron. Reliab. 53, 1002 (2013).10.1016/j.microrel.2013.03.003 ↗
14. H. Xu, C. Liu, V.V. Silberschmidt, Z. Chen, J. Wei, and M. Sivakumar, Microelectron. Eng. 51, 113 (2011).10.1016/j.microrel.2010.03.016 ↗
15. H. Clauberg, P. Beackus, and B. Chylak, Microelectron. Reliab. 51, 75 (2011).10.1016/j.microrel.2010.05.001 ↗
16. K.S. Goh and Z.W. Zhong, Microelectron. Eng. 83, 2009 (2006).10.1016/j.mee.2006.04.003 ↗
17. K.S. Goh and Z.W. Zhong, Microelectron. Eng. 84, 362 (2007).10.1016/j.mee.2006.11.002 ↗
18. Y. Ding, J.-K. Kim, and P. Tong, Mech. Mater. 38, 11 (2006).10.1016/j.mechmat.2005.05.007 ↗
19. H.-C. Hsu, W.-Y. Chang, C.-L. Yeh, and Y.-S. Lai, Microelectron. Reliab. 51, 179 (2011).
20. G.K. Akella, Viswanath, X. Zhang, V.P. Ganesh, and L. Chun, IEEE Trans. Adv. Packag. 30, 448 (2007).
21. L.C. Wai, N.B. Jaafar, M. Chew, Sivakumar, Gunasekaran, Kanchet, D. Witarsa, J.B. Tan, V.R. Srinivasa, T.C. Chai, A.D. Trigg, and J. Woo, in Proceedings of 13th Electronic Packaging Technology Conference (2011), p. 752.
22. J.C. Suhling and R.C. Jaeger, IEEE Sens. J. 1, 14 (2001).10.1109/JSEN.2001.923584 ↗