Conductive Anodic Filament (CAF) Formation Part I: the Influence of Water-Soluble Flux on Its Formation
Source abstract
Abstract
Conductive anodic filament (CAF) is a failure mode in printed wiring boards (PWBs) which occurs under high humidity and high voltage gradient conditions. The filament, a copper salt, grows from anode to cathode along the epoxy–glass interface. Ready and Turbini identified this copper salt as Cu2(OH)3Cl, atacamite. In the present work polyethylene glycol (PEG) and polyethylene propylene glycol (PEPG) fluxes were used to process hole-to-hole test coupons. The coupons were exposed to temperature, humidity, and bias testing of 85°C, 85% relative humidity (RH), and 200 V bias for 28 days. The aged coupons were then cross-sectioned, and scanning electron microscopy (SEM) and energy-dispersive spectroscopy (EDS) revealed that, in addition to CAF formation at the epoxy–glass interface, a copper-chloride-containing compound was present in the polymer matrix for coupons processed with PEPG. This compound was characterized using x-ray photoelectron spectroscopy (XPS) as CuCl. Coupons processed with PEG created CAF only at the epoxy–glass interface. Based on previous publications on copper electrodeposition in the presence of PEG, it appears that a PEG-Cu-Cl complex forms, binding the available Cu and acting as a barrier to the formation of CuCl in the polymer matrix.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Conducting polymers and applications · Recycling and Waste Management Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. P.J. Boddy, R.H. Delaney, J.N. Lahti, and E.F. Landry, 14th Annual Proceedings of Reliability Physics (1976), p. 108.
2. J.N. Lahti, R.H. Delaney, and J.H. Hines, 17th Annual Proceedings of Reliability Physics (1979), p. 39.
3. D.J. Lando, J.P. Mitchell, and T.L. Welsher, 17th Annual Proceedings of Reliability Physics (1979), p. 51.
4. T.L. Welsher, J.P. Mitchell, and D.J. Lando, 18th Annual Proceedings of Reliability Physics (1980), p. 235.
5. T.L. Welsher, J.P. Mitchell, and D.J. Lando, Annual Report of the Conference on Electrical Insulation and Dielectric Phenomena (1980), p. 234.
6. W.J. Ready (PhD Thesis in Materials Science and Engineering, Georgia Institute of Technology, 2000).
7. F.M. Zado, AT & T Eng. 27, 41 (1983).
8. J. Brous, Electron. Packag. Prod. 21, 80 (1981).
9. J. Brous, Proceedings of NEPCON West (1992), p. 386.
10. J.A. Jachim, G.F. Freeman, and L.J. Turbini, IEEE Trans. Compon. Pack. B 20, 443 (1997).10.1109/96.641513 ↗
11. J.A. Jachim (Masters of Science Thesis in Metallurgy, Georgia Institute of Technology, 1994).
12. W.J. Ready and L.J. Turbini, J. Electron. Mater. 31, 1208 (2002).10.1007/s11664-002-0012-z ↗
13. H. Arisawa and T.B. Brill, Combust. Flame 109, 87 (1997).10.1016/S0010-2180(96)00124-1 ↗
14. X. Han, Y.H. Hu, Z.K. Lin, S.F. Li, F.Q. Zhao, Z.R. Liu, J.H. Yi, L.Y. Zhang, and X.N. Ren, J. Therm. Anal. Calorim. 93, 927 (2008).10.1007/s10973-007-8715-2 ↗
15. A. DeMarderosian, Proceedings of IPC (Fall Meeting) (San Francisco, 1976), p. 708.
16. M. Yokoi, S. Konishi, and T. Hayashi, Denki Kagaku 52, 218 (1984).10.5796/kogyobutsurikagaku.52.218 ↗
17. Z.V. Feng, X. Li, and A.A. Gewirth, J. Phys. Chem. B 107, 9415 (2003).10.1021/jp034875m ↗
18. K.R. Hebert, S. Adhikari, and J.E. Houser, J. Electrochem. Soc. 152, C325 (2005).
19. J.W. Gallaway and A.C. West, J. Electrochem. Soc. 155, D632 (2008).10.1149/1.2958309 ↗