Pastes for electromagnetic interference shielding
Source abstract
Abstract
A paste has been developed for electromagnetic interference shielding by mixing stainless steel fibers (8-µm diameter) and graphite flakes (5 µm) in a water-based graphite colloid (containing submicron graphite flakes and a binder) in a volume ratio 0.5:20:100. The resulting coating of thickness 0.1–0.2 mm after drying exhibits shielding effectiveness of 34 dB at 1 GHz, primarily due to reflection. The paste is superior to those containing graphite flakes or carbon filaments (0.1-µm diameter), due to the higher shielding effectiveness of the steel fibers. The graphite flakes in the paste serves to help suspend the steel fibers, in addition to contributing to shielding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electromagnetic wave absorption materials · Advanced Antenna and Metasurface Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. D. Bjorklof, Compliance Eng. 15, 10 (1998).
2. R. Brewer and G. Fenical, Shielding: Eval. Eng. 37, S-4 (1998).
3. P. O’Shea, Eval. Eng. 37, 40 (1998).
4. R.S.R. Devender, Proc. Int. Conf. Electromagnetic Interference and Compatability (Piscataway, NJ: IEEE, 1997), pp. 459–466.10.1109/ICEMIC.1997.669850 ↗
5. B. Geddes, Control 9, 4 p. (1996).
6. S. Hempelmann, Galvanotechnik 88, 418 (1997).
7. W.D. Kimmel and D.D. Gerke, Med. Dev. Diagnostic Industry 17, 112 (1995).
8. H.W. Markstein, Electron. Packaging Prod. 35, 4 (1995).
9. K.A. McRae, Nat. Conf. Pub.-Institution of Engineers, Australian (Crows Nest, NSW, Australia: IE Aust, 1994), vol. 2 (94/11), pp. 495–498.
10. V.V. Sadchikov and Z.G. Prudnikova, Stal’ 4, 66 (1997).
11. S. Shinagawa, Y. Kumagai, and K. Urabe, J. Porous Mater. 6, 185 (1999).10.1023/A:1009619711017 ↗
12. J. Mao, J. Chen, M. Tu, W. Huang, and Y. Liu, Gongeng Cailiao/J. Funct. Mater. 28, 137 (1997).
13. J. Mao, J. Chen, M. Tu, W. Huang, and Y. Liu, Gongneng Cailiao/J. Funct. Mater. 28, 626 (1997).
14. D.D.L. Chung, Carbon 39, 279 (2001).10.1016/S0008-6223(00)00184-6 ↗
15. A. Kaynak, A. Polat, and U. Yilmazer, Mater. Res. Bull. 31, 1195 (1996).10.1016/0025-5408(96)00124-9 ↗
16. X. Fu and D.D.L. Chung, Carbon 36, 459 (1998).10.1016/S0008-6223(98)90017-3 ↗
17. X. Luo and D.D.L. Chung, Composites B 30, 227 (1999).10.1016/S1359-8368(98)00065-1 ↗
18. X. Shui and D.D.L. Chung, J. Electron. Packaging 119, 236 (1997).10.1115/1.2792242 ↗
19. P.B. Jana and A.K. Mallick, J. Elastomers Plastics 31, 1195 (1996).
20. X. Shui and D.D.L. Chung, J. Electron. Mater. 26, 107 (1995).10.1007/BF02659630 ↗
21. J.-M. Chiou, Q. Zheng, and D.D.L. Chung, Composites 20, 379 (1989).10.1016/0010-4361(89)90663-0 ↗
22. X. Shui and D.D.L. Chung, J. Electron. Mater. 24, 107 (1995).10.1007/BF02659630 ↗
23. Y. Ramadin, S.A. Jawad, S.M. Musameh, M. Ahmad, A.M. Zihlif, A. Paesano, E. Martuscelli, and G. Ragosta, Polymer Int. 34, 145 (1994).10.1002/pi.1994.210340204 ↗
24. J.C. Roberts and P.D. Weinhold, J. Composite Mater. 29, 1834 (1995).10.1177/002199839502901403 ↗
25. L.G. Morin, Jr. and R.E. Duvall, Proc. 43rd Int. SAMPE Symp. Exhib. (Covina, CA: SAMPE, 1998), vol. 43, pp. 874–881.
26. J.R. Gaier and J. Terry, 7th Int. SAMPE Electronics Conf. (Covina, CA: SAMPE, 1994) vol. 7, pp. 221–233.
27. X. Luo and D.D.L. Chung, Carbon 34, 1293 (1996).10.1016/0008-6223(96)82798-9 ↗
28. www.achesonindustries.com
29. J. Cao and D.D.L. Chung, Cem. Concr. Res. 33, 1737 (2003).10.1016/S0008-8846(03)00152-2 ↗
30. J. Wu and D.D.L. Chung, Carbon 41, 1313 (2003).10.1016/S0008-6223(03)00033-2 ↗
31. S. Wen and D.D.L. Chung, Cem. Concr. Res. 34, 329 (2004).10.1016/j.cemconres.2003.08.014 ↗
32. X. Shui and D.D.L. Chung, J. Mater. Sci. 35, 1773 (2000).10.1023/A:1004784720338 ↗