journal article·2014-06

Influence of an Optimized Thermoelectric Generator on the Back Pressure of the Subsequent Exhaust Gas System of a Vehicle

Roland Kühn, Olaf Koeppen, Jens Kitte

Journal of Electronic Materials· Volume 43· Issue 6
Publisher page

Abstract

Numerous research projects in automotive engineering focus on the industrialization of the thermoelectric generator (TEG). The development and the implementation of thermoelectric systems into the vehicle environment are commonly supported by virtual design activities. In this paper a customized simulation architecture is presented that includes almost all vehicle parts which are influenced by the TEG (overall system simulation) but is nevertheless capable of real-time use. Moreover, an optimized planar TEG with minimum nominal power output of about 580 W and pressure loss at nominal conditions of 10 mbar, synthesized using the overall system simulation, and the overall system simulation itself are used to answer a generally neglected question: What influence does the position of a TEG have on the back pressure of the subsequent exhaust gas system of the vehicle? It is found that the influence of the TEG on the muffler is low, but the catalytic converter is strongly influenced. It is shown that the TEG can reduce the back pressure of an exhaust gas system so much that its overall back pressure is less than the back pressure of a standard exhaust gas system.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Refrigeration and Air Conditioning Technologies · Thermal Radiation and Cooling Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (3)

Show source-provided references
1. J. Kitte, R. Kühn, H.-F. Pernau, K. Littmann, and D. Jänsch, Dimensioning and Evaluating a Multi-Channel Thermoelectric Generator Using a Customized Simulation Architecture, Thermoelectric Goes Automotive II (2013), pp. 207–224.
2. E.A. Feest and D.C.W. Blaikley, CITA Study No 4—Influence of Catalyst Temperature on Effectiveness of In-Service Testing—Final Report, E&E/DDSE/02/022 Issue 1 (2001).
3. Wikipedia, Worldwide Harmonized Light vehicles Test Procedures, http://en.wikipedia.org/wiki/Worldwide_harmonized_Light_vehicles_Test_Procedures , Accessed 26 June 2013.