journal article·2015-07

Microwave-Assisted Synthesis of High Dielectric Constant CaCu3Ti4O12 from Sol–Gel Precursor

Xin Ouyang, Peng Cao, Saifang Huang, Weijun Zhang, Zhaohui Huang, Wei Gao

Journal of Electronic Materials· Volume 44· Issue 7
Publisher page

Abstract

CaCu3Ti4O12 (CCTO) powders derived from sol–gel precursors were calcined and sintered via microwave radiation. The obtained CCTO powders were compared with that obtained via a conventional heating method. For microwave heating, 89.1 wt.% CCTO was achieved from the sol–gel precursor, after only 17 min at 950°C. In contrast, the conventional calcination method required 3 h to generate 87.6 wt.% CCTO content at 1100°C. In addition, the CCTO powders prepared through 17 min of microwave calcination exhibited a small particle size distribution of D50 = 3.826 μm. It was found that a lengthy hold time of 1 h by microwave sintering is required to obtain a high dielectric constant (3.14 × 103 at 102 Hz) and a reasonably low dielectric loss (0.161) in the sintered CCTO ceramic. Based upon the distinct microstructures, the dielectric responses of the CCTO samples sintered by different methods are attributed to space charge polarization and internal barrier layer capacitor mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. X. Hao, J. Adv. Dielect. 03, 1330001 (2013).10.1142/S2010135X13300016 ↗
2. N.H. Fletcher, A.D. Hilton, and B.W. Ricketts, J. Phys. D 29, 253 (1996).10.1088/0022-3727/29/1/037 ↗
3. P. Kim, N.M. Doss, J.P. Tillotson, P.J. Hotchkiss, M.J. Pan, S.R. Marder, J.Y. Li, J.P. Calame, and J.W. Perry, ACS Nano 3, 2581 (2009).10.1021/nn9006412 ↗
4. K. Yu, H. Wang, Y. Zhou, Y. Bai, and Y. Niu, J. Appl. Phys. 113, 034105 (2013).10.1063/1.4776740 ↗
5. W. Yang, S. Yu, R. Sun, and R. Du, Acta Mater. 59, 5593 (2011).10.1016/j.actamat.2011.05.034 ↗
6. M. Arbatti, X.B. Shan, and Z.Y. Cheng, Adv. Mater. 19, 1369 (2007).10.1002/adma.200601996 ↗
7. P. Barber, S. Balasubramanian, Y. Anguchamy, S. Gong, A. Wibowo, H. Gao, H.J. Ploehn, and H.C. zur Loye, Materials 2, 1697 (2009).10.3390/ma2041697 ↗
8. Z.M. Dang, T. Zhou, S.H. Yao, J.K. Yuan, J.W. Zha, H.T. Song, J.Y. Li, Q. Chen, W.T. Yang, and J. Bai, Adv. Mater. 21, 2077 (2009).10.1002/adma.200803427 ↗
9. Y. Bai, Z.Y. Cheng, V. Bharti, H.S. Xu, and Q.M. Zhang, Appl. Phys. Lett. 76, 3804 (2000).10.1063/1.126787 ↗
10. H.X. Tang, Y.R. Lin, and H.A. Sodano, Adv. Energy Mater. 2, 469 (2012).10.1002/aenm.201100543 ↗
11. M.A. Subramanian, D. Li, N. Duan, B.A. Reisner, and A.W. Sleight, J. Solid State Chem. 151, 323 (2000).10.1006/jssc.2000.8703 ↗
12. A.P. Ramirez, M.A. Subramanian, M. Gardel, G. Blumberg, D. Li, T. Vogt, and S.M. Shapiro, Solid State Commun. 115, 217 (2000).10.1016/S0038-1098(00)00182-4 ↗
13. C.C. Homes, T. Vogt, S.M. Shapiro, S. Wakimoto, and A.P. Ramirez, Science 293, 673 (2001).10.1126/science.1061655 ↗
14. T.B. Adams, D.C. Sinclair, and A.R. West, Adv. Mater. 14, 1321 (2002).10.1002/1521-4095(20020916)14:18<1321::AID-ADMA1321>3.0.CO;2-P ↗
15. T.B. Adams, D.C. Sinclair, and A.R. West, Phys. Rev. B 73, 094124 (2006).10.1103/PhysRevB.73.094124 ↗
16. R. Schmidt, M.C. Stennett, N.C. Hyatt, J. Pokorny, J. Prado-Gonjal, M. Li, and D.C. Sinclair, J. Eur. Ceram. Soc. 32, 3313 (2012).10.1016/j.jeurceramsoc.2012.03.040 ↗
17. J.C. Zhao, J. Liu, and G. Ma, Ceram. Int. 38, 1221 (2012).10.1016/j.ceramint.2011.08.052 ↗
18. T.T. Fang, L.T. Mei, and H.F. Ho, Acta Mater. 54, 2867 (2006).10.1016/j.actamat.2006.02.037 ↗
19. S.Y. Chung, I.D. Kim, and S.J.L. Kang, Nat. Mater. 3, 774 (2004).10.1038/nmat1238 ↗
20. C. Puchmark and G. Rujijanagul, Ferroelectrics 415, 107 (2011).10.1080/00150193.2011.577380 ↗
21. T.B. Adams, D.C. Sinclair, and A.R. West, J. Am. Ceram. Soc. 89, 3129 (2006).10.1111/j.1551-2916.2006.01184.x ↗
22. W.X. Yuan, S.K. Hark, and W.N. Mei, J. Ceram. Process. Res. 10, 696 (2009).
23. L. Cao, P. Liu, J.P. Zhou, Y.J. Wang, L.N. Su, C. Liu, and H.W. Zhang, J. Ceram. Process. Res. 11, 453 (2010).
24. F. Amaral, M. Valente, and L.C. Costa, Phys. Status Solidi A 208, 2284 (2011).10.1002/pssa.201000760 ↗
25. N. Banerjee and S.B. Krupanidhi, J. Alloys Compd. 509, 4381 (2011).10.1016/j.jallcom.2010.12.137 ↗
26. S.H. Jin, H.P. Xia, Y.P. Zhang, J.P. Guo, and J. Xu, Mater. Lett. 61, 1404 (2007).10.1016/j.matlet.2006.07.041 ↗
27. J. Liu, R.W. Smith, and W.N. Mei, Chem. Mater. 19, 6020 (2007).10.1021/cm0716553 ↗
28. L.J. Liu, H.Q. Fan, P.Y. Fang, and X.L. Chen, Mater. Res. Bull. 43, 1800 (2008).10.1016/j.materresbull.2007.07.012 ↗
29. C. Masingboon, P. Thongbai, S. Maensiri, T. Yamwong, and S. Seraphin, Mater. Chem. Phys. 109, 262 (2008).10.1016/j.matchemphys.2007.11.023 ↗
30. D.L. Sun, A.Y. Wu, and S.T. Yin, J. Am. Ceram. Soc. 91, 169 (2008).10.1111/j.1551-2916.2007.02096.x ↗
31. B. Barbier, C. Combettes, S. Guillemet-Fritsch, T. Chartier, F. Rossignol, A. Rumeau, T. Lebey, and E. Dutarde, J. Eur. Ceram. Soc. 29, 731 (2009).10.1016/j.jeurceramsoc.2008.07.042 ↗
32. J. Lu, D. Wang, and C. Zhao, J. Alloys Compd. 509, 3103 (2011).10.1016/j.jallcom.2010.12.010 ↗
33. B.P. Zhu, Z.Y. Wang, Y. Zhang, Z.S. Yu, J. Shi, and R. Xiong, Mater. Chem. Phys. 113, 746 (2009).10.1016/j.matchemphys.2008.08.037 ↗
34. A.F.L. Almeida, R.S. de Oliveira, J.C. Goes, J.M. Sasaki, A.G. Souza, J. Mendes, and A.S.B. Sombra, Mater. Sci. Eng. B 96, 275 (2002).10.1016/S0921-5107(02)00379-3 ↗
35. S. Jesurani, S. Kanagesan, R. Velmurugan, C. Thirupathi, M. Sivakumar, and T. Kalaivani, Mater. Lett. 65, 3305 (2011).10.1016/j.matlet.2011.06.107 ↗
36. J.J. Liu, Y.C. Sui, C.G. Duan, W.N. Mei, R.W. Smith, and J.R. Hardy, Chem. Mater. 18, 3878 (2006).10.1021/cm060836m ↗
37. N. Banerjee and S.B. Krupanidhi, Curr. Nanosci. 6, 432 (2010).10.2174/157341310791658955 ↗
38. X. Ouyang, S. Huang, W. Zhang, P. Cao, Z. Huang, and W. Gao, J. Solid State Chem. 211, 58 (2014).10.1016/j.jssc.2013.12.009 ↗
39. S.D. Hutagalung, M. Ikhwan, M. Ibrahim, and Z.A. Ahmad, Ceram. Int. 34, 939 (2008).10.1016/j.ceramint.2007.09.074 ↗
40. P. Thomas, L.N. Sathapathy, K. Dwarakanath, K.B.R. Varma, and B. Mater, Sci. 30, 567 (2007).
41. H.T. Yu, H.X. Liu, D.B. Luo, and M.H. Cao, J. Mater. Process. Technol. 208, 145 (2008).10.1016/j.jmatprotec.2007.12.104 ↗
42. L.C. Chen and F. Spaepen, J. Appl. Phys. 69, 679 (1991).10.1063/1.347349 ↗
43. H. Amorin, A.L. Kholkin, and M.E.V. Costa, J. Eur. Ceram. Soc. 25, 2453 (2005).10.1016/j.jeurceramsoc.2005.03.081 ↗
44. M.M. Ahmad, Appl. Phys. Lett. 102, 232908 (2013).10.1063/1.4811154 ↗
45. G.G. Raju, Dielectrics in Electric Fields (New York: CRC, 2003), p. 35.10.1201/9780203912270 ↗
46. L.X. Feng, X.M. Tang, Y.Y. Yan, X.Z. Chen, Z.K. Jiao, and G.H. Cao, Phys. Status Solidi A 203, R22 (2006).10.1002/pssa.200622038 ↗
47. P.R. Bueno, W.C. Ribeiro, M.A. Ramirez, J.A. Varela, and E. Longo, Appl. Phys. Lett. 90, 142912 (2007).10.1063/1.2720301 ↗
48. F. Amaral, L.C. Costa, M.A. Valente, and J. Non-Cryst, Solids 357, 775 (2011).