The Effects of Ta Substitution and K/Na Ratio Variation on the Microstructure and Properties of (K,Na)NbO3-Based Lead Free Piezoelectric Ceramics
Source abstract
Abstract
[(Na0.5+y K0.5−y )0.94Li0.06][(Nb0.94Sb0.06)1−x Ta x ]O3 + 0.08 mol% MnO2 lead-free piezoelectric ceramics were fabricated successfully by a conventional solid-state reaction method. The effects of Ta5+ substitution and K/Na ratio variation on the microstructure and properties of the ceramics have been systematically investigated. With the increasing of Ta5+ substitution content, the orthorhombic–tetragonal transition temperature T o–t presents obvious “V” type variation while the Curie temperature T c decreases monotonically. The ceramics properties were further enhanced by adjusting the Na/K ratio of the A-site. Under systematical optimization of the A-site and B-site elements, good overall electrical properties of d 33 = 276 pC/N, k p = 44.5%, e 33 /e 0 = 1,175, tanδ = 0.027, T c = 309 °C, P r = 21.0 μC/cm2, and E c = 1.14 kV/mm were obtained for ceramics with Ta5+ content x of 0.05 and Na/K ratio of 57/43 (y = 0.07).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Ferroelectric and Piezoelectric Materials · Acoustic Wave Resonator Technologies · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Y. Saito, H. Takao, T. Tani, T. Nonoyama, K. Takatori, T. Homma, T. Nagaya, and M. Nakamura, Nature 432, 84 (2004).10.1038/nature03028 ↗
2. F. Azough, M. Wegrzyn, R. Freer, S. Sharma, and D. Hall, J. Eur. Ceram. Soc. 31, 569 (2011).10.1016/j.jeurceramsoc.2010.10.033 ↗
3. Y. Dai, X. Zhang, and G. Zhou, Appl. Phys. Lett. 90, 262903 (2007).10.1063/1.2751607 ↗
4. J. Fu, R. Zuo, X. Wang, and L. Li, J. Phys. D Appl. Phys. 42, 012006 (2009).10.1088/0022-3727/42/1/012006 ↗
5. E. Hollenstein, M. Davis, D. Damjanovic, and N. Setter, Appl. Phys. Lett. 87, 182905 (2005).10.1063/1.2123387 ↗
6. R. Zuo, J. Fu, X. Wang, and L. Li, J. Mater. Sci. 21, 519 (2010).
7. H.-Y. Park, I.-T. Seo, J.-H. Choi, and S. Nahm, J. Am. Ceram. Soc. 93, 36 (2010).10.1111/j.1551-2916.2009.03359.x ↗
8. C.-M. Cheng, M.-C. Kuan, K.-H. Chen, and J.-H. Tsai, Ceram. Int. 38S, S335 (2012).10.1016/j.ceramint.2011.04.114 ↗
9. D. Lin, K.W. Kwok, H. Tian, and H.W. Lai-wa Chan, J. Am. Ceram. Soc. 90, 1458 (2007).10.1111/j.1551-2916.2007.01627.x ↗
10. IEEE Standards on Piezoelectricity ANSI/IEEE Standard No. 176–1987 (1987).
11. H. Wang, X. Zhai, J. Xu, C. Yuan, C. Zhou, and X. Liu, J. Electron. Mater. 42, 458 (2013).10.1007/s11664-012-2346-5 ↗
12. E.K. Akdoğan, K. Kerman, M. Abazari, and A. Safari, Appl. Phys. Lett. 92, 112908 (2008).10.1063/1.2897033 ↗
13. M. Kosec and D. Kolar, Mater. Res. Bull. 10, 335 (1975).10.1016/0025-5408(75)90002-1 ↗
14. W. Yang, Z. Zhou, B. Yang, R. Zhang, Z. Wang, H. Chen, and Y. Jiang, J. Am. Ceram. Soc. 94, 2489 (2011).10.1111/j.1551-2916.2011.04390.x ↗
15. Z. Yang, Y. Chang, and L. Wei, Appl. Phys. Lett. 90, 042911 (2007).10.1063/1.2436648 ↗
16. D. Lin, K.W. Kwok, K.H. Lam, and H.L. Chan, J. Appl. Phys. 101, 074111 (2007).10.1063/1.2715486 ↗
17. Y. Kang, Y. Zhao, R. Huang, Y. Zhao, and H. Zhou, J. Am. Ceram. Soc. 94, 1683 (2011).10.1111/j.1551-2916.2011.04558.x ↗
18. D. Lin, Q. Zheng, C. Xu, and K.W. Kwok, Appl. Phys. A 93, 549 (2008).10.1007/s00339-008-4667-z ↗
19. J. Wu, D. Xiao, Y. Wang, W. Lang, Y. Jiang, and J. Zhu, J. Am. Ceram. Soc. 91, 2385 (2008).10.1111/j.1551-2916.2008.02415.x ↗
20. M. Jiang, X. Liu, and G. Chen, Scr. Mater. 60, 909 (2009).10.1016/j.scriptamat.2009.02.017 ↗