The Effect of Thermal Annealing and Measurement Temperature on Interface State Density Distribution and Time Constant in Ni/n-GaP Rectifying Contacts
Source abstract
Abstract
The capacitance–frequency (C–f) and conductance–frequency (G–f) characteristics of the as-deposited and 400°C annealed Ni/n-GaP/Al diode were measured in a temperature range of 100–320 K with steps of 20 K. The values of interface state density Nss and their time constant were obtained from the temperature-dependent C–f and G–f characteristics in the measurement frequency range of 5.0 kHz to 5 MHz. The effect of annealing and measurement temperature on Nss and time constant of a Ni/n-GaP Schottky diode were analyzed from the forward bias voltage to the reverse bias voltage − 0.60 with steps of 0.30 V. The Nss value ranges from 8.8 × 1011 cm−2eV−1 at 0.60 V to 5.71 × 1011 cm−2eV−1 at − 0.60 V for the as-deposited diode, and 1.3 × 1012 cm−2eV−1 at 0.60 V to 5.5 × 1011 cm−2eV−1 at − 0.60 V for the 400°C annealed diode at a measurement temperature of 300 K. The interface state density value increases with high measurement temperature for the as-deposited and annealed diode.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Semiconductor materials and interfaces · Semiconductor materials and devices · Silicon Carbide Semiconductor Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. E.H. Rhoderick and R.H. Williams, Metal-Semiconductor Contacts, 2nd ed. (Oxford: Clarendon, 1988).
2. D.A. Neamen, Semiconductor Physics and Devices: Basic Principles, 4th ed. (New York: McGraw-Hill, 2012).
3. S.M. Sze, Physics of Semiconductor Devices, 2nd ed. (New York: Wiley, 1981).
4. M.S.P. Reddy, P. Puneetha, V.R. Reddy, J.H. Lee, S.H. Jeong, and C. Park, J. Electron. Mater. 45, 5655 (2016).10.1007/s11664-016-4809-6 ↗
5. R.H. Williams and G.Y. Robinson, Physics and Chemistry of III-V Compound Semiconductor Interfaces (New York: Plenum, 1985).
6. W. Mönch, Semiconductor Surfaces and Interfaces, 2nd ed. (Berlin: Springer, 1995).10.1007/978-3-662-03134-6 ↗
7. N. Shiwakoti, A. Bobby, B. Antony, and K. Asokan, J. Vac. Sci. Technol., B 34, 051206 (2016).10.1116/1.4961907 ↗
8. N. Shiwakoti, A. Bobby, K. Asokan, and B. Antony, Mater. Sci. Semicond. Process. 42, 378 (2016).10.1016/j.mssp.2015.11.010 ↗
9. A. Owens, S. Andersson, R. den Hartog, F. Quarati, A. Webb, and E. Welter, Nucl. Instrum. Methods Phys. Res. A. 581, 709 (2007).10.1016/j.nima.2007.07.146 ↗
10. E. Kabushemeyet, R.L. Van Meirhaeghe, W.H. Laflere, and F. Cardon, Semicond. Sci. Technol. 4, 543 (1989).10.1088/0268-1242/4/7/008 ↗
11. A.E. Belyaev, N.S. Boltovets, V.N. Ivanov, A.B. Kamalov, L.M. Kapitanchuk, R.V. Konakova, Y.Y. Kudryk, O.S. Lytvyn, V.V. Milenin, and M.U. Nasyrov, Semiconductors 42, 453 (2008).10.1134/S1063782608040143 ↗
12. Y. Nannichi and G.L. Pearson, Solid-State Electron. 12, 341 (1969).10.1016/0038-1101(69)90089-6 ↗
13. A. Türüt, H. Doğan, and N. Yıldırım, Mater. Res. Express 2, 096304 (2015).10.1088/2053-1591/2/9/096304 ↗
14. H. Tecimer, H. Uslu, Z.A. Alahmed, F. Yakuphanoglu, and Ş. Altındal, Compos. Part B 57, 25 (2014).10.1016/j.compositesb.2013.09.040 ↗
15. S. Duman, K. Ejderha, Ö. Yiğit, and A. Türüt, Microelectron. Reliab. X 52, 1005 (2016).10.1016/j.microrel.2011.12.018 ↗
16. Ö. Güllü and A. Türüt, J. Vac. Sci. Technol., B 28, 466 (2010).10.1116/1.3377141 ↗
17. M. Asghar, K. Mahmood, F. Malik, and M.A. Hasan, J. Phys: Conf. Ser. 439, 012031 (2013).
18. İ. Orak, K. Ejderha, and A. Turut, Curr. Appl. Phys. 15, 1054 (2015).10.1016/j.cap.2015.05.014 ↗
19. H. Dogan, N. Yıldırım, İ. Orak, S. Elagöz, and A. Turut, Phys. B 457, 48 (2015).10.1016/j.physb.2014.09.033 ↗
20. S. Duman, B. Gurbulak, S. Dogan, and A. Türüt, Vacuum 85, 798 (2011).10.1016/j.vacuum.2010.11.018 ↗
21. P. Pipinys, A. Rimeika, and A. Pipiniene, Solid-State Electron. 46, 1283 (2002).10.1016/S0038-1101(02)00070-9 ↗
22. Ç. Bilkan and S. Altındal, J. Alloys Compd. 708, 464 (2017).10.1016/j.jallcom.2017.03.013 ↗
23. Z. Ouennoughi and A. Sella, Int. J. Electron. 83, 571 (1997).10.1080/002072197135148 ↗
24. R. Padma, K. Sreenu, and V. Rajagopal, Reddy. J. Alloys Compd. 695, 2587 (2017).10.1016/j.jallcom.2016.11.165 ↗
25. A. Singh, Solid-State Electron. 28, 233 (1985).10.1016/0038-1101(85)90002-4 ↗
26. V. Rajagopal, Reddy. Indian J. Phys. 89, 463 (2015).10.1007/s12648-014-0602-7 ↗
27. İ. Orak, K. Ejderha, E. Sönmez, M. Alanyalıoglu, and A. Turut, Mater. Res. Bull. 61, 463 (2014).10.1016/j.materresbull.2014.10.066 ↗
28. A. Turut, B. Bati, A. Kokce, M. Saglam, and N. Yalcin, Phys. Scr. 53, 118 (1996).10.1088/0031-8949/53/1/023 ↗
29. S.K. Cheung and N.W. Cheung, Appl. Phys. Lett. 49, 85 (1986).10.1063/1.97359 ↗
30. S. Mahato, D. Biswas, L.G. Gerling, C. Voz, and J. Puigdollers, AIP Adv. 7, 085313 (2017).10.1063/1.4993553 ↗
31. B. Bati, C. Nuhoglu, M. Saglam, E. Ayyildiz, and A. Turut, Phys. Scr. 61, 209 (2000).10.1238/Physica.Regular.061a00209 ↗