Excellent Formaldehyde Gas-Sensing Properties of Ruptured Nd-Doped In2O3 Porous Nanotubes
Source abstract
Abstract
The ruptured Nd-doped In2O3 porous nanotubes have been successfully synthesized by single-capillary electrospinning method. The morphologies of the as-prepared materials were characterized by scanning electron microscopy and transmission electron microscopy. It can be seen obviously that the surface of the nanotubes are distributed with cracks and pores, which formed such an open nanostructure. The crystal structures and components were determined by x-ray diffraction, energy-dispersive x-ray spectroscopy and x-ray photoelectron spectrometer. The gas-sensing properties of ruptured Nd-doped In2O3 porous nanotubes were studied and the results show the excellent performances of the as-obtained materials. The response of ruptured Nd-doped In2O3 porous nanotubes to 100 ppm of formaldehyde is 46.8 at the optimum temperature of 240°C. The response and recovery times are 8 s and 22 s, respectively. Furthermore, the lowest detection limit of formaldehyde is 100 ppb with the value of 2.4. In addition, the ruptured Nd-doped In2O3 porous nanotubes exhibit good selectivity to formaldehyde and long-term stability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Advanced Chemical Sensor Technologies · Electrochemical sensors and biosensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. M.A. Omar, H.M. Ahmed, M.A. Hammad, and S.M. Derayea, Spectrochim. Acta 472, 135 (2015).
2. K. Zhou, Y. Cheng, H. Yang, C. Gu, Y. Xiao, and M. Zhao, Sensor. Actuat. B Chem. 721, 202 (2014).
3. X. Wang, Y. Li, X. Li, J. Yu, S.S. Al-Deyab, and B. Ding, Sensor. Actuat. B Chem. 333, 203 (2014).
4. Y. Tang, H. Chen, C. Weng, X. Tang, M. Zhang, and T. Hu, Spectrochim. Acta 506, 135 (2015).
5. P. Kar, T. Banerjee, S. Verma, A. Sen, A. Das, B. Ganguly, and H.N. Ghosh, Phys. Chem. Chem. Phys. 8192, 14 (2012).
6. A. Brandt and A. Balducci, J. Power Sources 44, 230 (2013).
7. A. Afzal, N. Cioffi, L. Sabbatini, and L. Torsi, Sensor. Actuat. B Chem. 25, 171–172 (2012).
8. D. Acharyya and P. Bhattacharyya, Sensor. Actuat. B Chem. 373, 228 (2016).
9. M. Tiemann, Chem. Eur. J. 8376, 13 (2007).
10. L. Wang, X. Luo, X. Zheng, R. Wang, and T. Zhang, RSC Adv. 9723, 3 (2013).
11. G.-H. An and H.-J. Ahn, Carbon 87, 65 (2013).
12. D. Braun, V. Scherer, C. Janowitz, Z. Galazka, R. Fornari, and R. Manzke, Phys. Status Solidi A 59, 211 (2014).
13. L. Xu, B. Dong, Y. Wang, X. Bai, J. Chen, Q. Liu, and H. Song, J. Phys. Chem. C 9089, 114 (2010).
14. D.D. Cheng, M.J. Zheng, L.J. Yao, S.H. He, L. Ma, W.Z. Shen, and X.Y. Kong, Nanotechnology 425302, 20 (2009).
15. H. Wu, L. Wang, J. Zhou, J. Gao, G. Zhang, S. Xu, Y. Xie, L. Li, and K. Shi, J. Colloid Interface Sci. 72, 466 (2016).
16. Y. Lin, H. Ji, Z. Shen, Q. Jia, and D. Wang, J. Mater. Sci. Mater. Electron. 2086, 27 (2015).
17. L. Liu, C. Liu, S. Li, L. Wang, H. Shan, X. Zhang, H. Guan, and Z. Liu, Sensors Actuat. B Chem. 893, 177 (2013).
18. W. Xu, J. Li, and J. Sun, RSC Adv. 81407, 5 (2015).
19. S. Zhang, P. Song, H. Yan, and Q. Wang, Sensors Actuat. B Chem. 245, 231 (2016).
20. K. Bouras, G. Schmerber, H. Rinnert, D. Aureau, H. Park, G. Ferblantier, S. Colis, T. Fix, C. Park, W.K. Kim, A. Dinia, and A. Slaoui, Sol. Energy Mater. Sol. C 134, 145 (2016).
21. C. Ge, C. Xie, M. Hu, Y. Gui, Z. Bai, and D. Zeng, Mater. Sci. Eng. B Solid 43, 141 (2007).
22. X. Li, J. Liu, H. Guo, X. Zhou, C. Wang, P. Sun, X. Hu, and G. Lu, RSC Adv. 545, 5 (2015).
23. X. Shen, L. Guo, G. Zhu, C. Xi, Z. Ji, and H. Zhou, RSC Adv. 64228, 5 (2015).
24. H. Yang, S. Wang, and Y. Yang, CrystEngComm 1135, 14 (2012).
25. Y. Tang and J. Ma, RSC Adv. 25692, 4 (2014).
26. C. Zhao, W. Hu, Z. Zhang, J. Zhou, X. Pan, and E. Xie, Sensors Actuat. B Chem. 486, 195 (2014).
27. D.D. Vuong, K.Q. Trung, N.H. Hung, N.V. Hieu, and N.D. Chien, J. Alloys Compd. 195, 599 (2014).
28. P. Sun, Y. Cai, S. Du, X. Xu, L. You, J. Ma, F. Liu, X. Liang, Y. Sun, and G. Lu, Sensors Actuat. B Chem. 336, 182 (2013).
29. C. Liu, X. Chi, X. Liu, and S. Wang, J. Alloys Compd. 208, 616 (2014).
30. X. Li, H. Zhang, C. Feng, Y. Sun, J. Ma, C. Wang, and G. Lu, RSC Adv. 27552, 4 (2014).
31. D.R. Miller, S.A. Akbar, and P.A. Morris, Sensors Actuat. B Chem. 250, 204 (2014).
32. L. Xu, H. Song, B. Dong, Y. Wang, J. Chen, and X. Bai, Inorg. Chem. 10590, 49 (2010).
33. W. Tang, J. Wang, P. Yao, and X. Li, Sensors Actuat. B Chem. 543, 192 (2014).
34. G. Adachi and N. Imanaka, Chem. Rev. 1497, 98 (1998).
35. C. Li, C. Feng, F. Qu, J. Liu, L. Zhu, Y. Lin, Y. Wang, F. Li, J. Zhou, and S. Ruan, Sensors Actuat. B Chem. 90, 207 (2015).