journal article·2016-08

Exploration of the Chaotic Behaviour in a Buck–Boost Converter Depending on the Converter and Load Elements

Şevki Demirbaş, Hikmet Fidanboy, Erol Kurt

Journal of Electronic Materials· Volume 45· Issue 8
Publisher page

Abstract

In this paper, detailed analyses of the chaotic behavior observed in a buck–boost converter are presented. Although this basic converter system is already known world-wide for the purpose of dc–dc conversion of the output of renewable energy systems, it indicates certain chaotic regimes where both the output amplitude and frequency change randomly. This chaotic regime can yield an unstable output over the resistive or resistive/inductive electrical loads. This study presents a detailed map for the regular and chaotic regions in terms of material parameters, such as converter capacitance C, resistive load R, and inductive load L. Thus, the stable area of operation for efficient and renewable electricity production will be ascertained for the studied converter system. We emphasize that the material parameters C, R, and L play important roles in generating energy from the solar cell; indeed, the stability increases with higher values of the converter capacitor and load inductance, whereas it decreases according to the resistive load. A number of periodic windows have been observed and the output frequency gives a broad-band spectrum of up to 50 kHz.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microgrid Control and Optimization · Advanced Battery Technologies Research · Power Systems and Renewable Energy

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. A. Mehrizi-Sani, W. Kinsner, and S. Filizadeh, Canadian Conf. Elect. Computer Engineering (Vancouver, BC, 2007)
2. J.H.B. Deane, IEEE Trans. Circ. Syst. 1 39, 680 (1992).10.1109/81.168922 ↗
3. C.K. Tse, IEEE Trans. Circ. Syst. 1 41, 16 (1994).10.1109/81.260215 ↗
4. S. Banerjee and K. Chakrabarty, IEEE Trans. Power Electron. 13, 252 (1998).10.1109/63.662832 ↗
5. H.H.C. Iu and C.K. Tse, IEEE Trans. Circ. Syst. 1 47, 913 (2000).10.1109/81.852945 ↗
6. J. Yang and F. Stabler, J. Electron. Mater. 38, 1245 (2009).10.1007/s11664-009-0680-z ↗
7. J. Park and S. Kim, J. Electron. Mater. 41, 1242 (2012).10.1007/s11664-011-1884-6 ↗
8. E. Kurt, Phys. Scripta 74, 22 (2006).10.1088/0031-8949/74/1/005 ↗
9. E. Kurt and M. Canturk, Physica D 238, 2229 (2009).10.1016/j.physd.2009.09.005 ↗
10. E. Kurt and M. Canturk, Int. J. Bifurc. Chaos 20, 3725 (2010).10.1142/S021812741002801X ↗
11. A.I. Bogdan, N. Bizon, and M. Oproescu, 6th Int. Conf. Electronics, Computers and Artificial Intelligence (ECAI) (23–25 October 2014, Bucharest, Romania)
12. J.H.B. Deane and D.C. Hamill, IEEE Trans. Power Electron. 5, 260 (1990).10.1109/63.56516 ↗
13. D.C. Hamill, Specialists Workshop on Nonlinear Dyn. Electronic Sys. (University College Dublin, Ireland, 1995), pp. 165–178
14. D.C. Hamill, J.H.B. Deane, and D.J. Jefferies, IEEE Trans. Power Electron. 7, 25 (1992).10.1109/63.124574 ↗
15. E. Fossas and G. Olivar, IEEE Trans. Circ. Syst 43, 13 (1996).10.1109/81.481457 ↗
16. S. Banerjee and G. Verghese, Nonlinear Phenomena in Power Electronics: Bifurcations, Chaos, Control, and Applications (New York: Wiley-IEEE Press, 2001).10.1109/9780470545393 ↗
17. N. Zhu and W. Wu, 5th Int. Conf. Power Electronics and Drive Systems, 2, pp. 1329–1333 (2003).
18. M. Canturk, E. Kurt, and I. Askerzade, COMPEL 30, 775 (2011).10.1108/03321641111101203 ↗
19. J.H.B. Deane and D.C. Hamill, 21. Annual IEEE Power Electronics Specialists Conference, pp. 491–498 (1990).10.1109/PESC.1990.131228 ↗
20. K. Chakrabarty, G. Poddar, and S. Banerjee, IEEE Trans. Power Electron. 11, 439 (1996).10.1109/63.491637 ↗
21. M. di Bernardo, A.R. Champneys, C.J. Budd, and F. Vasca, Proc. IEEE Int. Symposium on Circuits and Systems, pp. 262–265 (1992).
22. Y.L. Zou, X.S. Luo, and G.R. Chen, Chin. Phys. 15, 1719 (2006).10.1088/1009-1963/15/8/015 ↗
23. M. di Bernardo, F. Garefalo, L. Glielmo, and F. Vasca, 18th Annual IEEE Power Electronics Specialist Conference, pp. 754–760 (1997).
24. M. di Bernardo, F. Garofalo, L. Glielmo, and F. Vasca, 27th Annual IEEE Power Electronics Specialist Conference, pp. 1376–1381 (1996).10.1109/PESC.1996.548761 ↗
25. E. Ott, C. Grebogy, and J.A. Yorke, Phys. Rev. Lett. 64, 1196 (1990).10.1103/PhysRevLett.64.1196 ↗
26. T. Shinbrot, C. Grebogy, E. Ott, and J.A. Yorke, Nature 363, 411 (1993).10.1038/363411a0 ↗
27. P.T. Krein, J. Bentsman, R.M. Bass, and B.L. Lesieutre, IEEE Trans. Power Electron. 5, 182 (1990).10.1109/63.53155 ↗
28. K.W.E. Cheng, M. Liu, and J. Wu, IEE Proc. 150, 45 (2003).10.1049/ip-com:20030139 ↗
29. L. He, M. Jia, and G. Sun, Third International Workshop on Advanced Computational Intelligence, IEEE, pp. 426–431 (2010).
30. M. di Bernardo and F. Vasca, IEEE Trans. Circ. Syst. 47, 130 (2000).10.1109/81.828567 ↗
31. Y. Zhou, H.H.C. Iu, C.K. Tse, and J.N. Chen, ISCAS 2005, 2481 (2005).
32. A. El Aroudi, M. Debbat, R. Giral, and L. Martinez-Salamero, ISIE 2001, 2130 (2001).
33. H.K. Wang, P.L. Chang, F.H. Hsieh, and H.Y. Hsieh, Proceedings of the 2014 International Conference on Machine Learning and Cybernetics, IEEE, 2, pp. 632–637 (2014).10.1109/ICMLC.2014.7009682 ↗
34. A. Natsheh, G. Kettleborough, and G. Aldahim, Energy Conversion Congress and Exposition (ECCE), (12–16 Sept 2010, Atlanta, GA), pp. 4136–413910.1109/ECCE.2010.5617738 ↗