journal article·2015-10

Microstructure and Mechanical Properties of Tin-Bismuth Solder Reinforced by Aluminum Borate Whiskers

Jun Wang, Hongmei Wei, Peng He, Tiesong Lin, Fengjiao Lu

Journal of Electronic Materials· Volume 44· Issue 10
Publisher page

Abstract

Tin-bismuth solder has emerged as a promising lead-free alternative to tin-lead solder, especially for low-temperature packaging applications. However, the intrinsic brittleness of tin-bismuth solder alloy, aggravated by the coarse bismuth-rich phase and the thick interfacial intermetallic layer, notably limits the mechanical performance of the bonded joints. In this work, the microstructure and mechanical performance of solder joints were improved by adding 3.2 vol.% aluminum borate whiskers to the tin-bismuth solder alloy. This whisker-reinforced composite solder was fabricated through a simple process. Typically, 25-μm to 75-μm tin-bismuth particles were mixed with a small amount of aluminum borate whiskers with diameter of 0.5 μm to 1.5 μm and length of 5 μm to 15 μm. The addition of whiskers restrained the formation of coarse brittle bismuth-rich phase and decreased the lamellar spacing from 0.84 μm to 7.94 μm to the range of 0.22 μm to 1.80 μm. Moreover, the growth rate of the interfacial intermetallic layer during the remelting treatment decreased as well. The joint shear strength increased from 19.4 MPa to 24.7 MPa, and only declined by 4.9% (average, −5.9% to 15.8%) after the tenth remelting, while the shear strength of the joint without whiskers declined by 31.5% (average, 10.1–44.1%). The solder alloy was reinforced because of their high strength and high modulus and also the refinement effect on the solder alloy microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. M. Abtew and G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
2. C.M.L. Wu, D.Q. Yu, C.M.T. Law, and L. Wang, Mater. Sci. Eng. R 44, 1 (2004).10.1016/j.mser.2004.01.001 ↗
3. B. Zaccariba, Weld. Int. 15, 545 (2001).10.1080/09507110109549402 ↗
4. J. Shen and Y.C. Chan, Microelectron. Reliab. 49, 223 (2009).10.1016/j.microrel.2008.10.004 ↗
5. H.Y. Lee and J.G. Duh, J. Electron. Mater. 35, 494 (2006).10.1007/BF02690537 ↗
6. X. Lv, T. Lin, J. Wang, J. An, and P. He, Mater. Trans. 54, 1228 (2013).10.2320/matertrans.M2013117 ↗
7. L. Gao, J. Wang, T. Lin, P. He, and F. Lu, 14th International Conference on Electronic Packaging Technology (ICEPT), (2013), p. 193.
8. Y. Zhou, N. Zhao, C. Shi, E. Liu, X. Du, and C. He, Mater. Sci. Eng. A 598, 114 (2014).10.1016/j.msea.2013.12.086 ↗
9. J. Hu, X.F. Wang, and Z.Z. Zheng, J. Appl. Phys. 107, 023513 (2010).10.1063/1.3289909 ↗
10. S.C. Tjong and Y.W. Mai, Compos. Sci. Technol. 68, 583 (2008).10.1016/j.compscitech.2007.07.016 ↗
11. J. Yin, D. Yao, H. Hu, Y. Xia, K. Zuo, and Y.P. Zeng, Mater. Sci. Eng. A 607, 287 (2014).10.1016/j.msea.2014.04.021 ↗
12. M. Sobhani, H. Arabi, A. Mirhabibi, R.M.D. Brydson, and T. Nonferr, Metal. Soc. 23, 2994 (2013).
13. H.Q. Gao, L.D. Wang, and W.D. Fei, Mater. Sci. Eng. A 479, 261 (2008).10.1016/j.msea.2007.06.051 ↗
14. T. Lin, M. Yang, P. He, C. Huang, F. Pan, and Y. Huang, Mater. Des. 32, 4553 (2011).10.1016/j.matdes.2011.04.028 ↗
15. Y.S. Tang, G.Z. Liang, Z.P. Zhang, and J. Han, J. Appl. Polym. Sci. 106, 4131 (2007).10.1002/app.26118 ↗
16. Y.C. Feng, L. Geng, G.H. Fan, and A.B. Li, Mater. Des. 30, 3632 (2009).10.1016/j.matdes.2009.02.020 ↗
17. G.J. Zhang, J.F. Yang, M. Ando, and T. Ohji, J. Am. Ceram. Soc. 87, 299 (2004).10.1111/j.1551-2916.2004.00299.x ↗
18. R.J. McCabe and M.E. Fine, J. Electron. Mater. 31, 1276 (2002).10.1007/s11664-002-0021-y ↗
19. D. Frear, D. Grivas, and J.W. Morris, J. Electron. Mater. 16, 181 (1987).10.1007/BF02655484 ↗
20. J.P. Coughlin, J.J. Williams, and N. Chawla, J. Mater. Sci. 44, 700 (2009).10.1007/s10853-008-3188-7 ↗
21. M. Yang, T. Lin, P. He, and Y. Huang, Mater. Sci. Eng. A 528, 3520 (2011).10.1016/j.msea.2011.01.035 ↗
22. M. Murugesan, C. Zandén, X. Luo, L. Ye, V. Jokubavicius, M. Syväjärvi, and J. Liu, J. Mater. Chem. C 2, 7184 (2014).10.1039/C4TC00936C ↗
23. M.K. Mani, G. Viola, M.J. Reece, J.P. Hall, and S.L. Evans, Mater. Sci. Eng. A 592, 19 (2013).10.1016/j.msea.2013.10.099 ↗
24. A.A. El-Daly, G.S. Al-Ganainy, A. Fawzy, and M.J. Younis, Mater. Des. 55, 837 (2014).10.1016/j.matdes.2013.10.043 ↗
25. X. Wang, Y.C. Liu, C. Wei, H.X. Gao, P. Jiang, and L.M. Yu, J. Alloys Compd. 480, 662 (2009).10.1016/j.jallcom.2009.02.002 ↗
26. V. Tvergaard, Acta Metall. Mater. 38, 185 (1990).10.1016/0956-7151(90)90048-L ↗
27. X.N. Zhang, L. Geng, and B. Xu, Mater. Chem. Phys. 101, 242 (2007).10.1016/j.matchemphys.2006.04.004 ↗
28. Y. Feng, X. Zhou, Z. Min, and W. Kun, Scripta Mater. 53, 361 (2005).10.1016/j.scriptamat.2005.03.049 ↗
29. X. Zhang, L. Xu, S. Du, J. Han, P. Hu, and W. Han, Mater. Lett. 62, 1058 (2008).10.1016/j.matlet.2007.07.044 ↗
30. K. Suganuma, T. Fujita, N. Suzuki, and K. Niihara, J. Mater. Sci. Lett. 9, 633 (1990).10.1007/BF00721787 ↗
31. G. Simon and A.R. Bunsell, J. Mater. Sci. 19, 3649 (1984).10.1007/BF02396937 ↗
32. G. Bi, H.W. Wang, Q. Wang, R.J. Wu, and D. Zhang, J. Mater. Sci. Lett. 20, 799 (2001).10.1023/A:1010990008423 ↗
33. L.M. Peng, X.K. Li, H. Li, J.H. Wang, and M. Gong, Ceram. Int. 32, 365 (2006).10.1016/j.ceramint.2005.03.013 ↗
34. B. Cherukuri, R. Srinivasan, S. Tamirisakandala, and D.B. Miracle, Scripta Mater. 60, 496 (2009).10.1016/j.scriptamat.2008.11.040 ↗
35. M. Amagai, Microelectron. Reliab. 48, 1 (2008).10.1016/j.microrel.2007.05.004 ↗
36. B. Liu and H.C. Zeng, Small 1, 566 (2005).10.1002/smll.200500020 ↗
37. Y. Gu, P. Shen, N.N. Yang, and K.Z. Cao, J. Alloys Compd. 586, 80 (2014).10.1016/j.jallcom.2013.10.021 ↗
38. A. Sharma, S. Bhattacharya, S. Das, and K. Das, Metall. Mater. Trans. A 44, 5587 (2013).10.1007/s11661-013-1894-5 ↗