journal article·2002-12

Analyses of the practical adhesion strengths of the metal/polymer interfaces in electronic packaging

Jin Yu, J. Y. Song, I. S. Park

Journal of Electronic Materials· Volume 31· Issue 12
Publisher page

Abstract

There is a plethora of techniques to measure the adhesion strength of metal/polymer interfaces. However, the practical adhesion strength, which is the work done in separating the film from the substrate (or one film from another), is very sensitive to the test methods and the mechanical effects, such as the residual stress, thickness and mechanical properties of the layers, strain rate, and phase angle. Deriving intrinsic-adhesion properties of the interfaces, which are independent of such parameters, from the practical adhesion-strength measurements is a formidable task. In the present work, data from the three commonly used adhesion tests; pull-out, 90°-peel, and T-peel tests are compared with the intrinsic-adhesion properties of the interface, such as the interface-fracture toughness or the interface-fracture energy, and their implications are discussed. Material systems analyzed were Cu-based lead frame/epoxy-molding compound (EMC) and Cu/Cr/polyimide.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Synthesis and properties of polymers · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. K.L. Mittal, ed., Adhesion Measurement of Films and Coatings (Utrecht, Netherlands: VSP, 1978), pp. 1–13.
2. T.G. Chung, Y.-H. Kim, and J. Yu, J. Adhes. Sci. Technol. 8, 41 (1994).10.1163/156856194X00041 ↗
3. E.C. Ahn, J. Yu, and I.S. Park, J. Mater. Sci.: Mater. Electron. 6, 1 (1995).10.1007/BF00121237 ↗
4. E.C. Ahn, J. Yu, I.S. Park, and W.J. Lee, J. Adhes. Sci. Technol. 10, 1343 (1996).10.1163/156856196X00283 ↗
5. E.C. Ahn, J. Yu, and I.S. Park, J. Mater. Sci. 35, 1949 (2000).10.1023/A:1004770519874 ↗
6. I.S. Park, E.C. Ahn, J. Yu, and H.Y. Lee, Mater. Sci. Eng. A282, 137 (2000).10.1016/S0921-5093(99)00763-7 ↗
7. I.S. Park and J. Yu, Acta Mater. 46, 294 (1998).
8. Y.B. Park, I.S. Park, and J. Yu, Mater. Sci. Eng. A266, 261 (1999).10.1016/S0921-5093(98)01117-4 ↗
9. Y.B. Park and J. Yu, Mater. Sci. Eng. A266, 109 (1999).10.1016/S0921-5093(99)00023-4 ↗
10. H.Y. Lee and J. Yu, J. Electron. Mater. 28, 1444 (1999).10.1007/s11664-999-0138-3 ↗
11. H.Y. Lee and J. Yu, Mater. Sci. Eng. A277, 154 (2000).10.1016/S0921-5093(99)00536-5 ↗
12. J.Y. Song and J. Yu, Acta Mater. 50, 3985 (2002).10.1016/S1359-6454(02)00197-0 ↗
13. Z. Suo and J.W. Hutchinson, Mater. Sci. Eng. A107, 135 (1989).10.1016/0921-5093(89)90382-1 ↗
14. K.S. Kim and N. Aravas, Intl. J. Solids Struct. 24, 417 (1988).10.1016/0020-7683(88)90071-6 ↗
15. A.K. Moidu, A.N. Sinclair, and J.K. Spelt, J. Test. Eval. 23, 241 (1995).10.1520/JTE10421J ↗