journal article·2007-05-30

Electrically Nonconductive Thermal Pastes with Carbon as the Thermally Conductive Component

Chuangang Lin, Timothy A. Howe, D.D.L. Chung

Journal of Electronic Materials· Volume 36· Issue 6
Publisher page

Abstract

Electrically nonconductive thermal pastes have been attained using carbon (carbon black or graphite) as the conductive component and ceramic (fumed alumina or exfoliated clay) as the nonconductive component. For graphite particles (5 μm), both clay and alumina are effective in breaking up the electrical connectivity, resulting in pastes with electrical resistivity up to 1013Ω·cm and thermal contact conductance (between copper surfaces of roughness 15 μm) up to 9 × 104 W/m2·°C. For carbon black (30 nm), clay is more effective than alumina, providing a paste with resistivity 1011 Ω·cm and thermal contact conductance 7 × 104 W/m2·°C. Carbon black increases the thermal stability, whereas either graphite or alumina decreases the thermal stability. The antioxidation effect of carbon black is further increased by the presence of clay up to 1.5 vol.%. The addition of clay (up to 0.6 vol.%) or alumina (up to 2.5 vol.%) to graphite paste enhances the thermal stability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Battery Materials and Technologies · Graphene research and applications · Polymer Nanocomposites and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. E.G. Wolff, D.A. Schneider, Int. J. Heat Mass Transfer 41, 3469 (1998)10.1016/S0017-9310(98)00067-2 ↗
2. T. Ouellette and M. de Sorgo (Paper presented at Proc. Power Electronic Design Conf. Power Sources Users Conf., Cerritos, CA, 1985)
3. M.R. Vogel, Proc. INTERPACK '95 Electronic Packaging Conf. (New York: ASME, 1995), vol. 10–2, p. 989
4. V. Sartre, M. Lallemand, Appl. Therm. Eng. 21, 221 (2001)10.1016/S1359-4311(00)00034-X ↗
5. M. Grujicic, C.L. Zhao, E.C. Dusel, Appl. Surf. Sci. 246, 290 (2005)10.1016/j.apsusc.2004.11.030 ↗
6. D.D.L. Chung, J. Mater. Eng. Perform. 10, 56 (2001)10.1361/105994901770345358 ↗
7. L. Maguire, M. Behnia, G.L. Morrison, Microelectron. Reliab. 45, 711–725 (2005)10.1016/j.microrel.2004.10.030 ↗
8. M. Grujicic, C.L. Zhao, E.C. Dusel, Appl. Surf. Sci. 246, 290 (2005)10.1016/j.apsusc.2004.11.030 ↗
9. Y. Xu, X. Luo, D.D.L. Chung, J. Electron. Packag. 124, 188 (2002)10.1115/1.1477191 ↗
10. C.-K. Leong, D.D.L. Chung, Carbon 42, 2323 (2004)10.1016/j.carbon.2004.05.013 ↗
11. C.-K. Leong, D.D.L. Chung, Carbon 41, 2459 (2003)10.1016/S0008-6223(03)00247-1 ↗
12. C.-K. Leong, Y. Aoyagi, D.D.L. Chung, J. Electron. Mater. 34, 1336 (2005)10.1007/s11664-005-0259-2 ↗
13. C.-K. Leong, Y. Aoyagi, D.D.L. Chung, Carbon 44, 435 (2006)10.1016/j.carbon.2005.09.002 ↗
14. T.A. Howe, C.-K. Leong, D.D.L. Chung, J. Electron. Mater. 35, 1628 (2006)10.1007/s11664-006-0209-7 ↗
15. K. Zhang, G. Xiao, C.K.Y. Wong, H. Gu, M.M.F. Yuen, P.C.H. Chan, and B. Xu, Proc. 55th Electronic Components and Technology Conf. (Piscataway, NJ: Institute of Electrical and Electronics Engineers, 2005), vol. 1, pp. 60–65
16. Q. Ngo, B.A. Cruden, A.M. Cassell, G. Sims, J. Li, M. Meyyappan, and C.Y. Yang, Proc. Symp. Surface Engineering in Materials Science III, ed. A. Agarwal (Warrendale, PA: TMS, 2005), pp. 75–82
17. T. Lee, K. Chiou, F. Tseng, and C. Huang, Proc. 55th Electronic Components and Technology Conf. (Lake Buena Vista, FL: Institute of Electrical and Electronics Engineers, 2005), vol. 1, pp. 55–59
18. Y. Wu, C.H. Liu, H. Huang, S.S. Fan, Appl. Phys. Lett. 87, 213108 (2005)10.1063/1.2133916 ↗
19. PCT International Application WO 2006048848 (2006)
20. U.S. patent US 6,475,962 (2002)
21. M. Alexandre, P. Dubois, Mater. Sci. Eng. 28, 1 (2000)10.1016/S0927-796X(00)00012-7 ↗
22. A.B. Morgan, J.D. Harris, Polymer 45, 8695 (2004)10.1016/j.polymer.2004.10.067 ↗
23. N.H. Tran, G.R. Dennis, A.S. Mileva, G.S.K. Kannangara, P. Williams, M.A. Wilsona, R.N. Lamb, J. Colloid Interface Sci. 297, 541 (2006)10.1016/j.jcis.2005.11.008 ↗
24. D. Burgentzlé, J. Duchet, J.F. Gérard a, A. Jupinb, B. Fillon, J. Colloid Interface Sci. 278, 26 (2004)10.1016/j.jcis.2004.05.015 ↗
25. V.E. Yudina, G.M. Divouxb, J.U. Otaigbeb, V.M. Svetlichnyi, Polymer 46, 10866 (2005)10.1016/j.polymer.2005.08.087 ↗
26. T.T. Chasteka, A. Steina, C. Macosko, Polymer 46, 4431 (2005)10.1016/j.polymer.2005.02.062 ↗
27. D. Burgentzlé, J. Duchet, J.F. Gérard, A. Jupin, B. Fillon, J. Colloid Interface Sci. 278, 26 (2004)10.1016/j.jcis.2004.05.015 ↗
28. Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational (Brookfield Type) Viscometer, ASTM Standard D 2196, Annual Book of ASTM Standards, 2005 (West Conshohocken, PA: ASTM Int.), vol.␣06.01, pp. 233–237
29. R.G. de Kretser, P.J. Scales, D.V. Boger, Colloids Surf. 137, 307 (1998)10.1016/S0927-7757(97)00372-5 ↗
30. A.R. Horrocks, J. Mwila, M. Miraftab, M. Liu, S.S. Chohan, Polym. Degrad. Stab. 65, 25 (1999)10.1016/S0141-3910(98)00213-4 ↗
31. W. Hawkins, ed., Polymer Stabilization, ed. W. Hawkins (New York: Wiley-Interscience, 1972), pp. 63–65
32. Yasuhiro Aoyagi and D.D.L. Chung, J. Mater. Sci. 42, 235810.1007/s10853-007-1600-3 ↗