Preparation and Characterization of Silica-Coated CaCu3Ti4O12
Source abstract
Abstract
Silica was homogeneously coated on the surface of CaCu3Ti4O12 (CCTO) particles via the sol–gel method. The obtained powders were characterized by x-ray diffraction analysis, Fourier-transform infrared spectroscopy, transmission electron microscopy (TEM), energy-dispersive spectroscopy, scanning electron microscopy, and zeta potential analysis. The results demonstrate that there were silica layers on the surface of the CCTO particles. Physical and dielectric properties of silica-coated CCTO were also studied. TEM imaging showed that the thickness of the silica layer on the CCTO particles was about 20 nm to 35 nm. The specimen coated with 1.0 wt.% silica showed the maximum relative density of 96.7% with high dielectric constant (12.78 × 104) and low dielectric loss (0.005) at 20°C after sintering at 1000°C for 6 h.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Dielectric properties of ceramics · Ferroelectric and Piezoelectric Materials · Microwave Dielectric Ceramics Synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M.A. Subramanian, L. Dong, N. Duan, B.A. Reisner, and A.W. Sleight, J. Solid State Chem. 151, 323 (2000).10.1006/jssc.2000.8703 ↗
2. C. Masingboon, P. Thongbai, and S. Maensiri, Adv. Sci. Technol. 45, 2345 (2006).10.4028/www.scientific.net/AST.45.2345 ↗
3. T.B. Adams, D.C. Sinclair, and A.R. West, J. Am. Ceram. Soc. 89, 2833 (2006).10.1111/j.1551-2916.2006.01184.x ↗
4. L.C. Chang, D.Y. Lee, C.C. Ho, and B.S. Chiou, Thin Solid Films 516, 454 (2007).10.1016/j.tsf.2007.07.009 ↗
5. J. Li, A.W. Sleight, and M.A. Subramanian, Solid State Commun. 135, 260 (2005).10.1016/j.ssc.2005.04.028 ↗
6. S. Jin, H. Xia, Y. Zhang, J. Guo, and J. Xu, Mater. Lett. 61, 1404 (2007).10.1016/j.matlet.2006.07.041 ↗
7. A.K. Rai, K.D. Mandal, D. Kumal, and O. Parkash, J. Alloys Compd. 491, 507 (2010).10.1016/j.jallcom.2009.10.247 ↗
8. S. Kwon, C.C. Huang, M.A. Subramanian, and D.P. Cann, J. Alloys Compd. 473, 433 (2009).10.1016/j.jallcom.2008.06.015 ↗
9. A.R. West, T.B. Adams, F.D. Morrison, and D.C. Sinclair, J. Eur. Ceram. Soc. 24, 1439 (2004).10.1016/S0955-2219(03)00510-7 ↗
10. L.M. Marzan, M. Giersig, and P. Mulvaney, Langmuir 12, 4329 (1996).10.1021/la9601871 ↗
11. W.C. Chan and S. Nie, Science 281, 2016 (1998).10.1126/science.281.5385.2016 ↗
12. J.J. Schneider, Adv. Mater. 13, 529 (2001).10.1002/1521-4095(200104)13:7<529::AID-ADMA529>3.0.CO;2-X ↗
13. H.B. Lee, Y.M. Yoo, and Y.H. Han, Scr. Mater. 55, 1127 (2006).10.1016/j.scriptamat.2006.08.044 ↗
14. C. Sun, X. Wang, and L. Li, Ceram. Int. 38S, S49 (2012).10.1016/j.ceramint.2011.04.047 ↗
15. H.I. Hsianga, C. Hsib, C. Huangc, and S. Fu, Mater. Chem. Phys. 113, 658 (2009).10.1016/j.matchemphys.2008.08.033 ↗
16. E. Gomez, J. Echeberria, I. Iturriza, and F. Castro, J. Eur. Ceram. Soc. 24, 2895 (2004).10.1016/j.jeurceramsoc.2003.09.002 ↗
17. J.S. Park and Y.H. Han, Ceram. Int. 31, 777 (2005).10.1016/j.ceramint.2004.09.003 ↗
18. S. Kochawattana, A. Stevenson, S. Lee, M. Ramireza, V. Gopala, J. Dumm, V.K. Castillo, G.J. Quarles, and G.L. Messing, J. Eur. Ceram. Soc. 28, 1527 (2008).10.1016/j.jeurceramsoc.2007.12.006 ↗
19. R. Chen, A. Cui, X. Wang, Z. Gui, and L. Li, Mater. Lett. 54, 314 (2002).10.1016/S0167-577X(01)00584-5 ↗
20. J.C. Zhao, J. Liu, and G. Ma, Ceram. Int. 38, 1221 (2012).10.1016/j.ceramint.2011.08.052 ↗
21. A.F.L. Almeida, R.S. de Oliveira, J.C. Góes, J.M. Sasaki, A.G. Souza Filho, J. Mendes Filho, and A.S.B. Sombra, Mater. Sci. Eng. B 96, 275 (2002).10.1016/S0921-5107(02)00379-3 ↗
22. J.M. Saldana, B. Mullier, and G.A. Schneider, J. Eur. Ceram. Soc. 22, 681 (2002).10.1016/S0955-2219(01)00336-3 ↗