journal article·2012-07

Mechanical Properties of Anisotropic Conductive Adhesive Film Under Hygrothermal Aging and Thermal Cycling

Li-Lan Gao, Xu Chen, Hong Gao

Journal of Electronic Materials· Volume 41· Issue 7
Publisher page

Abstract

Mechanical properties of anisotropic conductive adhesive film (ACF) were investigated experimentally under various environmental conditions. The temperature sweep test was conducted to investigate the effects of temperature on dynamical mechanical properties of the ACF. The ACF exhibited transitions to the glass state, viscoelastic state, and rubber state with increasing temperature, and its glass-transition temperature (Tg) was determined to be 149°C. The creep-recovery behaviors of the ACF were investigated, and it was found that the initial strains, instantaneous strains, and creep or recovery rates increased with increasing temperature. No obvious creep phenomenon was observed at low temperatures (≤0°C). The creep strain and creep rates at any time decreased with increasing hygrothermal aging time. The uniaxial tensile behaviors of the ACF were also investigated under hygrothermal aging and thermal cycling. The results show that the Young’s modulus and tensile strength of the ACF decrease with increasing hygrothermal aging time; however, they increase at first and then decrease with increasing thermal cycling time. Tg decreases slightly for the ACF after hygrothermal aging; however, it increases after thermal cycling.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Electronic Packaging and Soldering Technologies · Mechanical Behavior of Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (35)

Show source-provided references
1. S.K. Kang and S. Purushothaman, J. Electron. Mater. 28, 1314 (1999).10.1007/s11664-999-0173-0 ↗
2. W.S. Kwon and K.W. Paik, Int. J. Adhesion Adhesives 24, 135 (2004).10.1016/j.ijadhadh.2003.07.003 ↗
3. J.H. Zhang, Y.C. Chan, Z.M. Zeng, and Y.W. Chiu, in Proceedings of Electrical Components and Technology Conference (IEEE, 2002), p. 1569.
4. K. Pinardi, Z. Lai, D. Vogel, Y.L. Kang, J. Liu, S. Liu, R. Haug, and M. Willander, IEEE Trans. Compon. Packag. Technol. 23, 447 (2000).10.1109/6144.868843 ↗
5. V.A. Chiriac and T.Y.T. Lee, IEEE Trans. Compon. Packag. Technol. 24, 673 (2001).10.1109/6144.974960 ↗
6. G. Sarkar, S. Mridha, T.T. Chong, W.Y. Tuck, and S.C. Kwan, J. Mater. Process. Technol. 89–90, 484 (1999).10.1016/S0924-0136(99)00136-3 ↗
7. S.A. Jr. Vona, Q.K. Tong, R. Kuder, and D. Shenfield, in International Symposium on Advanced Packaging Materials (IEEE, 1998), p. 261.
8. M. Zwolinski, J. Hickman, H. Rubin, Y. Zaks, S. McCarthy, T. Hanlon, P. Arrowsmith, A. Chaudhuri, R. Hermansen, S. Lau, and D. Napp, IEEE Trans. Compon. Packag. Manuf. Technol. C 19, 241 (1996).10.1109/3476.558550 ↗
9. C.W. Tan, Y.W. Chiu, and Y.C. Chan, Mater. Sci. Eng. B 98, 255 (2003).10.1016/S0921-5107(03)00047-3 ↗
10. J. Liu, K. Gustafsson, Z. Lai, and C. Li, IEEE Trans. Compon. Packag. Manuf. Technol. 20, 21 (1997).10.1109/95.558540 ↗
11. Y.C. Chan and D.Y. Luk, Microelectron. Reliab. 42, 1185 (2002).10.1016/S0026-2714(02)00079-3 ↗
12. Y.C. Chan and D.Y. Luk, Microelectron. Reliab. 42, 1195 (2002).10.1016/S0026-2714(02)00089-6 ↗
13. C.W. Tan, Y.C. Chan, and N.H. Yeung, Microelectron. Reliab. 43, 481 (2003).10.1016/S0026-2714(02)00318-9 ↗
14. X. Chen, J. Zhang, C.L. Jiao, and Y.M. Liu, Microelectron. Reliab. 46, 774 (2006).10.1016/j.microrel.2005.07.115 ↗
15. Y.C. Lin, X. Chen, and Z.P. Wang, J. Adhesion Sci. Technol. 20, 1383 (2006).10.1163/156856106778456654 ↗
16. J. Haase, D. Farley, P. Iyer, P. Baumgartner, A. Dasgupta, and J. Caers, J. Adhesion Sci. Technol. 22, 1733 (2008).10.1163/156856108X320564 ↗
17. J.S. Hwang, M.J. Yim, and K.W. Paik, Microelectron. Reliab. 48, 293 (2008).10.1016/j.microrel.2006.07.097 ↗
18. D. Lu and C.P. Wong, J. Adhesion Sci. Technol. 22, 835 (2008).10.1163/156856108X305525 ↗
19. D. Lu and C.P. Wong, J. Appl. Polym. Sci. 74, 399 (1999).10.1002/(SICI)1097-4628(19991010)74:2<399::AID-APP22>3.0.CO;2-F ↗
20. X. Chen, J. Zhang, and Z.P. Wang, in Proceedings of the 9th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Las Vegas, NV, 2004), p. 453.
21. L.L. Mercado, J. White, V. Sarihan, T.Y.T Lee. IEEE Trans. Compon. Packag. Technol. 26, 509 (2003)10.1109/TCAPT.2003.817640 ↗
22. C.W. Tan, Y.C. Chan, and N.H. Yeung, Microelectron. Reliab. 43, 279 (2003).10.1016/S0026-2714(02)00293-7 ↗
23. E. Jokinen and E. Ristolainen, Microelectron. Reliab. 42, 1913 (2002).10.1016/S0026-2714(02)00100-2 ↗
24. C.T. Murray, P.B. Hogerton, T. Chheang, R.L. Rudman, and H. Egeberg, in 4th International Conference on Adhesive Joining and Coating Technology in Electronics Manufacturing (Espoo, Finland, 2000), p. 820.
25. X. Chen, J. Zhang, and Z.P. Wang, in 9th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (Las Vegas, NV, 2004), p. 453.
26. J.H. Zhang and Y.C. Chan, J. Electron. Mater. 32, 228 (2003).10.1007/s11664-003-0214-z ↗
27. A. Nagai, K. Takemura, K. Isaka, O. Watanabe, K. Kojima, K. Matsuda, and I. Watanabe, in 2nd IEMT/IMC Symposium (IEEE, 1998), p. 353.
28. A. Gasse, C. Rossat, J.C. Souriau, C. Gillot, F. Glasser, and J.C. Clemens, in Nuclear Science Symposium Conference Record (IEEE, 2003), p. 237.10.1109/NSSMIC.2003.1352038 ↗
29. H. Li, K.S. Moon, Y. Li, L. Fan, J. Xu, and C.P. Wong, in 54th IEEE Electronic Components and Technology Conference (IEEE, 2004), p. 165.
30. S.Y. Yang, W.S. Kwon, S.B. Lee, and K.W. Paik, Key Eng. Mater. 297–300, 887 (2005).10.4028/www.scientific.net/KEM.297-300.887 ↗
31. L.L. Gao, X. Chen, S.B. Zhang, and H. Gao, Mater. Sci. Eng. A 513–514, 216 (2009).
32. Y.H. Mei, X. Chen, and H. Gao, J. Electron. Mater. 38, 2415 (2009).10.1007/s11664-009-0893-1 ↗
33. Y.C. Lin, X.M. Chen, and J. Zhang, Polym. Test. 30, 8 (2010).10.1016/j.polymertesting.2010.10.003 ↗
34. J. Ma, H. Gao, L.L. Gao, and X. Chen, Polym. Test. 30, 571 (2011).10.1016/j.polymertesting.2011.04.010 ↗
35. J. Tao, Z.J. Yao, and F. Xie, Fundamentals of Materials Science (Beijing: Chemical Industry, 2006).