journal article·2005-01

Texture investigation of copper interconnects with a different line width

J. -Y. Cho, K. Mirpuri, D. N. Lee, J. -K. An, J. A. Szpunar

Journal of Electronic Materials· Volume 34· Issue 1
Publisher page

Abstract

To understand the effect of line width on textural and microstructural evolution of Cu damascene interconnect, three Cu interconnects samples with different line widths are investigated. According to x-ray diffraction (XRD) results, the (111) texture is developed in all investigated lines. Scattered {111}〈112〉 and {111}〈110〉 texture components are present in 0.18-µm-width interconnect lines, and the {111}〈110〉 texture was developed in 2-µm-width interconnect lines. The directional changes of the (111) plane orientation with increased line width were investigated by XRD. In addition, microstructure and grain-boundary character distribution (GBCD) of Cu interconnect were measured using electron backscattered diffraction (EBSD) techniques. This measurement demonstrated that a bamboo-like microstructure is developed in the narrow line, and a polygranular structure is developed in the wider line. The fraction of ∑3 boundaries is increased as the line width increases but is decreased in the blanket film. A new interpretation of textural evolution in damascene interconnect lines after annealing is suggested, based on the state of stress and growth mechanisms of Cu deposits.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. P. Singer, Semicond. Int. 21, 91 (1998).
2. R. Rosenberg, D.C. Edelstein, C.-K. Hu, and K.P. Rodbell, Annual Rev. Mater. Sci. 30, 229 (2000).10.1146/annurev.matsci.30.1.229 ↗
3. J.M.E. Harper and K.P. Rodbell, J. Vac. Sci. Technol. B 15, 763 (1997).10.1116/1.589407 ↗
4. P.C. Andricacos, C. Uzoh, J.O. Dukovic, J. Horkans, and H. Deligianni, IBM J. Res. Develop. 42, 567 (1998).10.1147/rd.425.0567 ↗
5. C. Lingk, M.E. Gross, and W.L. Brown, J. Appl. Phys. 87, 2232 (2000).10.1063/1.372166 ↗
6. S.P. Riege and C.V. Thompson, Scripta Mater. 41, 403 (1999).10.1016/S1359-6462(99)00098-6 ↗
7. L. Vanasupa, Y.-C. Joo, P.R. Besser, and S. Pramanick, J. Appl. Phys. 85, 2538 (1999).10.1063/1.369624 ↗
8. D.P. Field, J.E. Sanchez, Jr., P.R. Besser, and D.J. Dingley, J. Appl. Phys. 82, 2383 (1997).10.1063/1.365763 ↗
9. J.L. Hurd, K.P. Rodbell, L.M. Gignac, L.A. Clevenger, R.C. Iggulden, R.F. Schnabel, S.J. Weber, and N.H. Schmidt, Appl. Phys. Lett. 72, 326 (1998).10.1063/1.120726 ↗
10. K.T. Lee, J.A. Szpunar, A. Morawiec, D.B. Knorr, and K.P. Rodbell, Can. Metall. Q. 34, 287 (1995).10.1179/cmq.1995.34.3.287 ↗
11. H. Li, TexTools, ver. 3.1 (Resmat, Montreal, PQ, Canada 2000).
12. P.R. Besser et al., J. Electron. Mater. 30, 320 (2001).10.1007/s11664-001-0038-7 ↗
13. F. Czerwinski, H. Li, M. Megret, and J.A. Szpunar, Scripta Metall. Mater. 37, 1967 (1997).10.1016/S1359-6462(97)00390-4 ↗
14. H.J. Shin, H.-T. Jeong, and D.N. Lee, Mater. Sci. Eng. A 279, 244 (1997).10.1016/S0921-5093(99)00535-3 ↗
15. D.N. Lee and K.H. Hur, Scripta Mater. 40, 13333 (1999).
16. D.N. Lee, Scripta Metall. Mater. 32, 1689 (1995).10.1016/0956-716X(95)00256-U ↗
17. D.N. Lee, Int. J. Mech. Sci. 42, 1645 (2000).10.1016/S0020-7403(99)00095-8 ↗
18. D.N. Lee and H.J. Lee, J. Electron. Mater. 32, 1012 (2003).10.1007/s11664-003-0083-5 ↗