journal article·2012-08

Solder Characteristics of a Rapidly Solidified Sn-9Zn-0.1Cr Alloy and Mechanical Properties of Cu/Solder/Cu Joints

Guoji Zhao, Guangmin Sheng, Jun Luo, Xinjian Yuan

Journal of Electronic Materials· Volume 41· Issue 8
Publisher page

Abstract

Rapidly solidified Sn-9Zn-0.1Cr alloy foils were obtained by the melt-spinning method. The solder characteristics of this rapidly solidified alloy were analyzed and compared with those of as-solidified Sn-9Zn and Sn-9Zn-0.1Cr alloys. The mechanical properties of Cu/solder/Cu joints obtained using these alloys were comparatively investigated. Compared with the as-solidified Sn-9Zn and Sn-9Zn-0.1Cr alloys, the melting point of the rapidly solidified Sn-9Zn-0.1Cr alloy was lower by about 9°C and its wettability was better. The microstructure of the soldering seam was notably fine and the intermetallic compound (IMC) layer became relatively uniform using the rapidly solidified Sn-9Zn-0.1Cr solder. The tensile shear strengths of the joints using the rapidly solidified solder were markedly higher than those of the joints using the as-solidified solders. The former exhibited good solderability and excellent joint strength. The improved properties of the joints might result from the formation of fine-grained IMCs with a needle pattern and more uniform IMC layer at the interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. T. Laurila, V. Vuorinen, and J.K. Kivilahti, Mater. Sci. Eng-R: Rep. 49, 1 (2005).10.1016/j.mser.2005.03.001 ↗
2. K. Suganuma and K.S. Kim, J. Mater. Sci.: Mater. Electron. 18, 121 (2007).10.1007/s10854-006-9018-2 ↗
3. L. Zhang, S.B. Xue, L.L. Gao, Z. Sheng, H. Ye, Z.X. Xiao, G. Zeng, Y. Chen, and S.L. Yu, J. Mater. Sci.: Mater. Electron. 21, 1 (2010).10.1007/s10854-009-0014-1 ↗
4. X. Chen, M. Li, X.X. Ren, A.M. Hu, and D.L. Mao, J. Electron. Mater. 35, 1734 (2006).10.1007/s11664-006-0227-5 ↗
5. A.A. El-Daly and A.E. Hammad, Mater. Sci. Eng. A 527, 5212 (2010).10.1016/j.msea.2010.04.078 ↗
6. R. Mahmudi, A.R. Geranmayeh, H. Noori, and M. Taghaddosi, J. Electron. Mater. 38, 330 (2009).10.1007/s11664-008-0576-3 ↗
7. H.J. Lin and T.H. Chuang, J. Electron. Mater. 39, 200 (2010).10.1007/s11664-009-0959-0 ↗
8. X.X. Ren, M. Li, and D.L. Mao, Electron. Compon. Mater. 23, 40 (2004).
9. X. Chen, A.M. Hu, M. Li, and D.L. Mao, J. Alloys Compd. 460, 478 (2008).10.1016/j.jallcom.2007.05.087 ↗
10. X. Chen, A.M. Hu, M. Li, and D.L. Mao, J. Alloys Compd. 470, 429 (2009).10.1016/j.jallcom.2008.02.112 ↗
11. J. Hu, A.M. Hu, M. Li, and D.L. Mao, Mater. Charact. 61, 355 (2010).10.1016/j.matchar.2009.12.019 ↗
12. J.L. Bi, A.M. Hu, J. Hu, T.B. Luo, M. Li, and D.L. Mao, Microelectron. Reliab. 51, 636 (2011).10.1016/j.microrel.2010.09.028 ↗
13. M. Kamal, A.B. El-Bediwi, and T. El-Ashram, J. Mater. Sci.: Mater. Electron. 15, 211 (2004).10.1023/B:JMSE.0000012457.77041.c6 ↗
14. W. Yang, F. Liu, H.F. Wang, B.P. Lu, and G.C. Yang, J. Alloys Compd. 509, 2903 (2011).10.1016/j.jallcom.2010.11.152 ↗
15. V.G. Shepelevich and O.V. Gusakova, Inorg. Mater. 44, 485 (2008).10.1134/S0020168508050105 ↗
16. O.V. Gusakova and V.G. Shepelevich, Inorg. Mater.: Appl. Res. 1, 344 (2010).10.1134/S2075113310040143 ↗
17. R.M. Shalaby, J. Alloys Compd. 505, 113 (2010).10.1016/j.jallcom.2010.05.179 ↗
18. M. Kamal and E.S. Goda, Mater. Manuf. Proc. 21, 736 (2006).10.1080/10426910600727890 ↗
19. Y.S. Kim, K.S. Kim, C.W. Hwang, and K. Suganuma, J. Alloys Compd. 352, 237 (2003).10.1016/S0925-8388(02)01168-4 ↗
20. C.M.L. Wu, C.M.T. Law, D.Q. Yu, and L. Wang, J. Electron. Mater. 32, 63 (2003).10.1007/s11664-003-0238-4 ↗
21. E.J. Lavernia and T.S. Srivatsan, J. Mater. Sci. 45, 287 (2010).10.1007/s10853-009-3995-5 ↗
22. H. Jones, Mater. Sci. Eng. A 304–306, 11 (2001).10.1016/S0921-5093(00)01552-5 ↗
23. R. Mayappan and Z.A. Ahmad, Intermetallics 18, 730 (2010).10.1016/j.intermet.2009.11.016 ↗
24. C.W. Hwang, K.S. Kim, and K. Suganuma, J. Electron. Mater. 32, 1249 (2003).10.1007/s11664-003-0019-0 ↗