journal article·2008-03

Effect of Lanthanum Doping on the Microstructure of Tin-Silver Solder Alloys

Min Pei, Jianmin Qu

Journal of Electronic Materials· Volume 37· Issue 3
Publisher page

Abstract

In this study, quantitative microstructure studies were performed on multiple length scales to investigate the effect of lanthanum (La) doping on Sn-Ag lead-free solder materials. Factors considered in this paper include doping amount, aging temperature, and aging time. It was found that La doping reduces the grain size significantly, and the reduced grain size remains stable during thermal aging. The size of the Ag3Sn particles is also greatly reduced by La doping, and the particles coarsen during thermal aging, albeit at a much reduced rate than in the undoped alloy. The rate of particle coarsening can be described by a cubic-root law. Another observation is that the interparticle spacing remains unaffected by the doping. Therefore, higher La doping level leads to higher volume fraction of the eutectic region due to the increased total number of Ag3Sn particles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Chen Z.G., Shi Y.W., Xia Z.D., Yan Y.F., J. Electron. Mater. 31 (10), 1122 (2002)10.1007/s11664-002-0052-4 ↗
2. Yu D.Q., Law C.M.T., Wang L., Wu C.M.L., J. Electron. Mater., 31 (9) 921 (2002)10.1007/s11664-002-0184-6 ↗
3. Yu D.Q., Law C.M.T., Wang L., Wu C.M.L., J. Electron. Mater., 31 (9) 928 (2002)10.1007/s11664-002-0185-5 ↗
4. Anon, Photon. Spectra, 36(5), 139 (2002)10.1002/1521-3781(200204)36:2<139::AID-CIUZ139>3.0.CO;2-I ↗
5. Ma X., Qian Y., Yoshida F., J. Alloy Compd., 334, 224 (2002)10.1016/S0925-8388(01)01747-9 ↗
6. Y. Zhu, H. Fang, and Y. Qian, Materials Research Society Symposium Proceedings, v 323, Electronic Packaging Materials Science VII, 137 (1994)
7. Chen Z., Shi Y., Xia Z., Yan Y., J. Electron. Mater., 32 (4) 235 (2003)10.1007/s11664-003-0215-y ↗
8. Dudek M.A., Sidhu R.S., Chawla N., JOM, 58 (6) 57 (2006)10.1007/s11837-006-0184-8 ↗
9. M. Pei (Ph.D. Dissertation, Georgia Institutive of Technology, 2007)
10. http://www.boulder.nist.gov/div853/lead%20free/part2.html#%202.2.19 as in Dec. 2006
11. M. Pei and J. Qu, ECTC 2007 (2007), p. 273
12. G.F. VanderVoort, ed., ASM Handbook, vol. 9, Metallography and Microstructures (ASM International, 2004)10.31399/asm.hb.v09.9781627081771 ↗
13. Huang M., Su X., Yin F., Zhang P., Li Z., Chen C., J. Alloy Compd., 309, 147(2000)10.1016/S0925-8388(00)01077-X ↗
14. C.F.J. Wu and M. Hamada, Experiments Planning, Analysis, and Parameter Design Optimization (John Wiley & Sons, Inc., 2000)
15. A.U. Telang and T.R. Bieler, J. Electron. Mater., 33(12) 1412 (2004)10.1007/s11664-004-0081-2 ↗
16. I. Dutta, J. Electron. Mater., 32 (4) 201 (2003)10.1007/s11664-003-0210-3 ↗
17. Callister W. Jr., Materials Science and Engineering: An Introduction, Wiley, New York, (1985)
18. Allen S.L. et al. (2004) J. Mater. Res. 19(5) 141710.1557/JMR.2004.0190 ↗
19. Allen S.L. et al. (2004) J. Mater. Res. 19(5) 142510.1557/JMR.2004.0191 ↗
20. A.W. Gibson, S.L. Choi, K.N. Subramanian, and T.R. Bieler, Design Reliability of Solders and Solder Interconnections (1997 TMS Annual Meeting, 1997)