The joint strength and microstructure of fluxless Au/Sn solders in InP-based laser diode packages
Source abstract
Abstract
The joint strength and microstructure of fluxless Au/Sn solders in InP-based laser-diode packages after thermal-aging testing were studied experimentally and numerically. Specimens were aged at 150°C for up to 64 days. The joint strength decreased as aging time increased. The microstructure and fracture surface of the Au/Sn solder joints showed that the joint strength decrease was caused by both the enlargement of the initial voids and an increase in the number of voids as the aging time increased. Finite-element method (FEM) simulations of joint strength were in good agreement with experimental measurements. Both experimental and numerical results indicate that the enlargement of the initial voids and an increase in the number of voids, caused by stress concentration as the aging period increased, resulted in the weakness of joint strength. The effect of temperature-cycling testing on the power variation of the InP laser diodes using fluxless Au/Sn solders was also studied. It was shown that the laser diodes operated in the stable condition up to 500 cycles.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Semiconductor Lasers and Optical Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. D.S. Alles, Proc. 40th ECTC (Piscataway, NJ: IEEE CPMT Society, 1990), pp. 185–192.
2. J.H. Kuang, M.T. Sheen, C.F. Chang, C.C. Chen, G.L. Wang, and W.H. Cheng, IEEE Trans. Components, Hybrids Manufacturing, Technol. 24, 563 (2001).
3. M.T. Sheen, C.M. Chang, H.C. Teng, J.H. Kuang, K.C. Hsieh, and W.H. Cheng, J. Electron. Mater. 31, 895 (2002).10.1007/s11664-002-0201-9 ↗
4. R.E. Pratt, E.I. Stromswold, and D.J. Quesnel, IEEE Trans. Components, Hybrids Manufacturing Technol. Part A 19, 134 (1996).10.1109/95.486625 ↗
5. C. Basaran and R. Chandaroy, IEEE Trans. Components, Hybrids Manufacturing Technol. Part A 20, 530 (1997).10.1109/95.650944 ↗
6. N.M. Poon, C.M. Lawrence Wu, J.L. Lai, and Y.C. Chan, IEEE Trans. Adv. Packaging 23, 708 (2000).10.1109/6040.883762 ↗
7. Z.M. Gauan, G.X. Liu, and T. Liu, IEEE Trans. Adv. Packaging 23, 737 (2000).10.1109/6040.883766 ↗
8. S.C. Wang, C.M. Wang, C. Wang, H.L. Chang, Y.K. Tu, C.J. Hwang, C. Chi, W.H. Wang, Y.D. Yang, and W.H. Cheng, J. Electron. Mater. 25, 797 (1996).
9. Metals Handbook, 8th ed. (Cleveland, OH: ASM, 1973), pp. 266–267.
10. “Bellcore Reliability Assurance Practices for Optoelectronic Devices in Loop Applications,” Report No. TA-TSY-000983, Issue 1 (Red Bank, NJ: Bellcore, Jan. 1990).
11. “Test Method and Procedures for Microelectronics,” Military Standard MIL-STD-2019.7 (Philadelphia, PA: Naval Publications and Forms Center, 1990).
12. W.D. Callister, Materials Science and Engineering: An Introduction, 3rd ed. (New York: John Wiley & Sons, 1994), pp 181–235.
13. MARC 6.3, User Guide (Palo Alto, CA: MARC Analysis Research Corporation, 1996), Vol. E, pp. 3.1-1–3.17-1.
14. MENTAL II, User Guide (Palo Alto, CA: MARC Analysis Research Corporation, 1996), ch. 6, pp. 6-1–6-26.
15. W.H. Cheng, Y.D. Yang, S.C. Wang, S. Chi, M.T. Sheen, and J.H. Kuang, IEEE Trans. Components, Hybrids Manufacturing Technol. 20, 396 (1997).
16. J.H. Lau and Y.H. Pao, Solder Joint Reliability of BGA, CSP, Flip Chips, and Fine Pitch SMT Assemblies (New York: McGraw-Hill, 1997), ch. 4, pp. 91–152.
17. E. Suhir, J. Lightwave Technol. 12, 1766 (1994).10.1109/50.337488 ↗