journal article·2005-11

Contact resistance and shear strength of the solder joints formed using Cu bumps capped with Sn or Ag/Sn layer

Seung-Hyun Lee, Hee-Ra Roh, Zhi Gang Chen, Young-Ho Kim

Journal of Electronic Materials· Volume 34· Issue 11
Publisher page

Abstract

Solder joints were successfully bonded by joining Ag/Sn/Cu bumps and Ag/Sn/Cu layers at 200°C for 30 sec under 20 MPa, 40 MPa, and 80 MPa using thermo-compression bonder. The solder joints were aged at 150°C up to 1000 h. The strength of the solder joints was measured by the shear test and the contact resistance was measured using four-point probe method. The microstructure of the solder joints and the fracture modes after shear test were analyzed by scanning electron microscopy (SEM) with the energy-dispersive spectrometry (EDS). Results showed that the electrical resistance of the solder joints decreased, and the shear strength of the solder joints increased after aging treatment. The fracture modes were observed to move from the interfacial failure between solder and intermetallic compounds (IMCs) to the interfacial failure between IMCs. It was considered that the transition of fracture modes was closely related with the microstructure evolution of the solder joints, especially the transformation of IMC phases during the aging treatment.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. S.F. Al-Sarawi, D. Abbott, and P.D. Franzon, IEEE Trans. Components, Packaging, and Manufacturing Technology—Part B 21, 2 (1998).10.1109/96.659500 ↗
2. H. Kanbach, J. Wilde, F. Kriebel, and E. Meusel, Soldering Surface Mount Technol. 12, 35 (2000).10.1108/09540910010312429 ↗
3. M. Kada, IEICE Trans. on Electronic E Ser. C 84, 1763 (2001).
4. K. Takahashi, M. Umemoto, N. Tanaka, K. Tanida, Y. Nemoto, Y. Tomita, M. Tago, and M. Bonkohara, Microelectr. Reliability 43, 1267 (2003).10.1016/S0026-2714(03)00167-7 ↗
5. Y. Tomita, T. Morifuji, M. Tomisaka, M. Sunohara, Y. Nemoto, T. Sato, K. Takahashi, and M. Bonkohara, J. Chem. Eng. Jpn. 36, 119 (2003).10.1252/jcej.36.119 ↗
6. S.H. Lee and Y.-H. Kim, Key Eng. Mater., in press.
7. F. Bartels and J.W. Morris, Jr., J. Electron. Mater. 23, 787 (1994).10.1007/BF02651374 ↗
8. K.N. Tu and R.D. Thompson, Acta Metall. 30, 947 (1982).10.1016/0001-6160(82)90201-2 ↗
9. H.T. Lee and M.H. Chen, Mater. Sci. Eng. A 333, 24 (2002).
10. A.C.K. So, Y.C. Chan, and J.K.L. Lai, IEEE Trans. Components, Packaging, and Manufacturing Technol.—Part B 20, 161 (1997).10.1109/96.575568 ↗
11. C.M. Chuang and K.L. Lin, J. Electron. Mater. 32, 1426 (2003).10.1007/s11664-003-0111-5 ↗
12. H. Akio, Y. Hiroto, I. Eiichi, and F.K. Kojiro, Sci. Technol. Adv. Mater. 5, 267 (2004).10.1016/j.stam.2003.10.024 ↗
13. A. Sharif and Y.C. Chan, Mater. Sci. Eng. B106, 126 (2004)10.1016/j.mseb.2003.09.004 ↗
14. E.A. Brandes and G.B. Brook, Smithells Metals Reference Book (Boston: Butterworth-Heinemann, 1998), pp. 13-1–13-119.
15. R.J. Fields, S.R. Low, and G.K. Lucey, Jr., The Metal Science of Joining (Warrendale, PA: TMS, 1992), p. 165.