journal article·2016-11

Epoxy Composites with Added Aluminum with Binary Particle Size Distribution for Enhanced Dielectric Properties and Thermal Conductivity

Xuezhen Sui, Wenying Zhou, Lina Dong, Zijun Wang, Peng Wu, Jing Zuo, Huiwu Cai, Xiangrong Liu

Journal of Electronic Materials· Volume 45· Issue 11
Publisher page

Abstract

Three kinds of hybrid aluminum (Al) particles with binary particle size distribution, i.e., [2 μm/50 μm], [2 μm/18 μm] and [18 μm/50 μm], were added in epoxy (EP) to prepare hybrid Al/EP composites with enhanced dielectric properties and thermal conductivity for embedded capacitor applications. The dielectric permittivity, dissipation factor, and thermal conductivity of three types of hybrid Al/EP composites were investigated as a function of relative volume fraction of smaller-size Al of hybrid Al particles (Vs) at a total filler content of 60 wt.%, respectively. The results indicate that dielectric permittivity and thermal conductivity of the hybrid Al/EP mainly depend on two factors, such as the type of hybrid filler and the Vs. The maximum dielectric permittivity of 48 appears at Vs = V18μm/V(18μm+50μm) = 35%. While, the above two factors have a negligible influence on the dissipation factor, which is as low as 0.022. The highest thermal conductivity of 1.28 W/m K is obtained at Vs = V18μm/V(18μm+50μm) = 50%. The maximum thermal conductivity for three hybrid systems shifts towards lower Vs with decreasing the size ratio of a larger Al to a smaller one.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Dielectric materials and actuators · Electromagnetic wave absorption materials · Ferroelectric and Piezoelectric Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. R. Popielarz and C.K. Chiang, Mater. Sci. Eng. 139, 48 (2007).10.1016/j.mseb.2007.01.035 ↗
2. Z.M. Dang, Y.F. Yu, and H.P. Xu, Compos. Sci. Technol. 68, 171 (2008).10.1016/j.compscitech.2007.05.021 ↗
3. Y. Kobayashi, T. Tanase, and T. Tabata, J. Eur. Ceram. Soc. 28, 117 (2008).10.1016/j.jeurceramsoc.2007.05.007 ↗
4. J.W. Xu and C.P. Wong, Compos. A 38, 13 (2007).10.1016/j.compositesa.2006.02.002 ↗
5. S.S. Vaisakh, M. Hassanzadeh, and R. Metz, Polym. Adv. Technol. 25, 240 (2014).10.1002/pat.3230 ↗
6. Q. Zhang and S.H. Qi, J. Elastom. Plast. 47, 431 (2015).10.1177/0095244313516887 ↗
7. C.L. Poh, M. Mariatti, and M.N. Ahmad, Fauzi. J. Mater. Sci. 25, 2111 (2014).
8. Z.J. Wang, W.Y. Zhou, and X.Z. Sui, J. Reinf. Plast. Compos. 34, 1126 (2015).10.1177/0731684415588776 ↗
9. W.Y. Zhou D.M. Yu and C.F. Wang, Soc. Am. Mater. Process. Exhib. Long Beach 52, 18 (2008).
10. J.W. Bae, W. Kim, and S.H. Cho, J. Mater. Sci. 35, 5907 (2000).10.1023/A:1026741300020 ↗
11. W.Y. Zhou, Thermochim. Acta 512, 183 (2011).10.1016/j.tca.2010.10.003 ↗
12. W.Y. Zhou, S.H. Qi, and C.C. Tu, J. Appl. Polym. Sci. 140, 1312 (2007).10.1002/app.25789 ↗
13. J.P. Hong, S.W. Yoon, and T. Hwang, Thermochim. Acta 537, 70 (2012).10.1016/j.tca.2012.03.002 ↗
14. W. Song, C.Q. Li, and L. Lin, Phys. Procedia 50, 405 (2013).10.1016/j.phpro.2013.11.062 ↗
15. L.S. Wang, X.Y. Piao, and H. Zou, Appl. Phys. A 118, 243 (2015).10.1007/s00339-014-8667-x ↗
16. W.Y. Zhou, Q.G. Chen, and X.Z. Sui, Compos. A 71, 184 (2015).10.1016/j.compositesa.2015.01.024 ↗
17. Y.C. Zhou, H. Wang, and F. Xiang, Appl. Phys. Lett. 98, 182906 (2011).10.1063/1.3580588 ↗
18. W.Y. Zhou and D.M. Yu, J. Mater. Sci. 48, 7960 (2013).10.1007/s10853-013-7606-0 ↗
19. W.Y. Zhou and J. Zuo, Polym. Mater. Sci. Eng. Sin. 27, 76 (2011).
20. H.R. Li, M. Jiang, and L.J. Dong, J. Macromol. Sci. B 52, 1073 (2013).10.1080/00222348.2012.754707 ↗
21. D.S. Saidina, M. Mariatti, and M.J. Julie, J. Mater. Sci. 25, 4923 (2014).
22. Z.J. Wang, W.Y. Zhou, X.Z. Sui, L.N. Dong, H.W. Cai, J. Zuo, and Q.G. Chen, J. Electron. Mater. 45, 3069 (2016).10.1007/s11664-016-4339-2 ↗
23. K. Gaska, A. Rybak, and C. Kapusta, Polym. Adv. Technol. 26, 26 (2015).10.1002/pat.3414 ↗
24. B.L. Zhang, Q.Y. Zhang, H.P. Zhang, X.F. Lei, D.Z. Yin, X.L. Fan, and L.W. Zhou, J. Polym. Res. 19, 1 (2012).10.1007/s10965-012-0001-8 ↗
25. D.J. Cumberland and R.J. Crawford, Handbook of Powder Technology: The Packing of Particles, vol. VI (Amsterdam: Elsevier, 1987) 33.
26. S. Choi and J. Kim, Compos. B 51, 140 (2013).10.1016/j.compositesb.2013.03.002 ↗