Effect of Polyethylene Glycol Additives on Pulse Electroplating of SnAg Solder
Source abstract
Abstract
Eutectic Sn-3.5wt.%Ag alloy is one of the most promising lead-free solders in low temperature processes for wafer bumping. Near eutectic composition of deposited alloy films could be readily acquired by pulse electroplating with a proper combination of active ingredients including K4P2O7, KI, Sn2P2O7, and AgI, as well as polyethylene glycol (PEG), with molecular weights of 200, 600, 2,000, and 4,000, as an inhibitive agent. Pulse electroplating was carried out with current in alternating polarity to conduct electroplating and electropolishing sequentially. As a result, alloy films with grains of less than 1 μm and uniform surface morphology can be obtained. The addition of PEG was necessary for the stabilization of the plating baths to promote a wider process window for the desirable eutectic composition. Electrochemical characterization established that PEG with molecular weight of 4,000 exhibited the strongest inhibition behavior. In contrast, PEG with molecular weight of 200 demonstrated the least interference. Energy dispersive X-ray and differential scanning calorimeter data confirmed the formation of eutectic alloy as a function of deposition current density. X-ray diffraction results indicated that a biphasic structures of β-Sn and e-Ag3Sn was present in the as-deposited film.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies · Nanomaterials and Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. International Technology Roadmap for Semiconductors, Assembly and Packaging Section (San Jose, CA: Semiconductor Industry Association, 2003), p. 4.
2. D. Suraski and K. Seeling, IEEE Trans. Electron. Packag. Manufact. 24, 244 (2001).10.1109/6104.980031 ↗
3. K. Nimmo, Proc. Electron. Goes Green 2000+ (Berlin, Germany, Sep., 2000), p. 43.
4. K. J. Puttlitz, Proc. Short Course, 50th Electron. Comp. Technol. Conf. (Las Vegas, NV, 2000).
5. H. Nawafune, K. Ikeda, H. Kitamura, S. Mizaunoto, T. Takeuchi, and K. Aoki, J. Surf. Fin. Soc. Jpn. 49, 759 (1998).10.4139/sfj.49.759 ↗
6. S. Arai and T. Watanabe, J. Surf. Fin. Soc. Jpn. 49, 73 (1998).10.4139/sfj.49.73 ↗
7. T. Kondo, K. Obata, T. Takeuchi, and S. Masaki, Plat. Surf. Finish. February, 51 (1998).
8. S. Arai and T. Watanabe, Mater. Trans. JIM 39, 439 (1998).10.2320/matertrans1989.39.439 ↗
9. Y. Fujiwara, T. Narahara, H. Enomoto, K. Funada, and T. Omi, J. Surf. Fin. Soc. Jpn. 49, 1316 (1998).10.4139/sfj.49.1316 ↗
10. H. Nawafune, K. Shiba, S. Mizumoto, T. Takeuchi, and K. Aoki, J. Surf. Fin. Soc. Jpn. 51, 1234 (2000).10.4139/sfj.51.1234 ↗
11. S. Arai, N. Kaneko, and N. Shinohara, Electrochemistry 69, 254 (2001).10.5796/electrochemistry.69.254 ↗
12. M. Jordan, Trans. IMF. 75, 149 (1997).10.1080/00202967.1997.11871162 ↗
13. H. Tanaka, M. Tanimoto, A. Matsuda, T. Uno, M. Kurihara, and S. Shiga, J. Electron. Mater. 28, 1216 (1999).10.1007/s11664-999-0160-5 ↗
14. H. Nawafune, K. Ikeda, K. Shiba, S. Mizumoto, T. Takeuchi, and K. Aoki, J. Surf. Fin. Soc. Jpn. 50, 923 (1999).10.4139/sfj.50.923 ↗
15. M. Fukuda, K. Hirakawa, and Y. Matsumoto, J. Surf. Fin. Soc. Jpn. 50, 1125 (1999).10.4139/sfj.50.1125 ↗
16. S. Arai and N. Kaneko, Denki Kagaku oyobi Kogyo Butsuri 65, 1102 (1997).10.5796/kogyobutsurikagaku.65.1102 ↗
17. S. Arai, N. Kaneko, and N. Shinohara, J. Surf. Sci. Soc. Jpn. 22, 463 (2001).10.1380/jsssj.22.463 ↗
18. F. Guo, S. Choi, J.O. Lucas, and K.N. Subramanian, J. Electron. Mater. 29, 10 (2000).10.1007/s11664-000-0086-4 ↗
19. M. Jordan, Galvanotechnik 92, 1225 (2001).
20. M. Paunovic andM. Schlesinger, Fundamentals of Electrochemical Deposition (New York: John Wiley & Sons, 1998).
21. M. Schlesinger and M. Paunovic, Modern Electroplating, 4th ed. (New York: John Wiley & Sons, 2000).
22. I. Mizushima, P.T. Tang, H.N. Hansen, and M.A.J. Somers, Electrochim. Acta 51, 888 (2005).10.1016/j.electacta.2005.04.050 ↗
23. I. Mizushima, P.T. Tang, H.N. Hansen, and M.A.J. Somers, Electrochim. Acta 51, 6182 (2006).10.1016/j.electacta.2005.11.053 ↗
24. I. Baskaran, T.S.N. Sankara Narayanan, and A. Stephen, Mater. Lett. 60, 1990 (2006).10.1016/j.matlet.2005.12.065 ↗
25. B. Neveu, F. Lallemand, G. Poupon, and Z. Mekhalif, Appl. Surf. Sci. 252, 3561 (2006).10.1016/j.apsusc.2005.05.024 ↗
26. S.C. Chang, J.M. Shieh, K.C. Lin, and B.T. Dai, J. Vac. Sci. Technol. B 20(4), 1311 (2002).10.1116/1.1486231 ↗
27. J.P. Healy and D. Pletcher, J. Electroanal. Chem. 338, 155 (1992).10.1016/0022-0728(92)80420-9 ↗
28. T.O. Drews, J.C. Ganley, and R.C. Alkire, J. Electrochem. Soc. 150, C325 (2003).10.1149/1.1563653 ↗
29. E.E. Fardon, F.C. Walsh, and S.A. Campbell, J. Appl. Electrochem. 25, 574 (1995).10.1007/BF00573215 ↗
30. T.P. Moffat, B. Baker, D. Wheeler, and D. Jossell, Electrochem. Solid State Lett. 6, C59 (2003).10.1149/1.1553936 ↗
31. S. Arai, H. Akatsuka and N. Kaneko, J. Electrochem. Soc. 150(10), C730 (2003).10.1149/1.1606687 ↗
32. S.C. Chang, J.M. Shieh, K.C. Lin, and B.T. Dai, J. Vac. Sci. Technol. B 20(6), 2233 (2002).10.1116/1.1518974 ↗
33. J.J. Kelly and A.C. West, J. Electrochem. Soc. 145, 3472 (1998).10.1149/1.1838829 ↗