Effect of Addition of Ag, In or Pb on the Structure and Thermoelectric Performance of β-Zn4Sb3
Source abstract
Abstract
Zn4Sb3 bulk alloys with addition of Ag, Pb or In were prepared by high- frequency induction melting and post-annealing. X-ray powder diffraction analysis showed that the lattice of the compound was distorted by the additions. Differential scanning calorimetry analysis revealed that the phase transition from β to α or α to α′ was suppressed by the addition of In or Ag. A high carrier concentration and high thermal conductivity were found in the sample with Ag or In additions. However, lower electric resistivity, nearly the same Seebeck coefficient, and low thermal conductivity, as compared with the undoped sample, were found in the sample with Pb addition, leading to good thermoelectric performance. The highest ZT value of 1.12 at 605 K was achieved for the Pb0.02Zn4Sb3 sample in this work, which is about 30% larger than that for the undoped β-Zn4Sb3.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Electronic Packaging and Soldering Technologies · Chalcogenide Semiconductor Thin Films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (38)
Show source-provided references
1. T. Caillat, J.P. Fleurial, and A. Borshchevsky, J. Phys. Chem. Solids 58, 1119 (1997).10.1016/S0022-3697(96)00228-4 ↗
2. M. Chitroub, F. Besse, and H. Scherrer, J. Alloy. Compd. 460, 90 (2008).10.1016/j.jallcom.2007.06.051 ↗
3. S.-C. Ur, P. Nash, and I.-H. Kim, J. Alloy. Compd. 361, 84 (2003).10.1016/S0925-8388(03)00418-3 ↗
4. Y. Mozharivskyj, Y. Janssen, J.L. Harringa, A. Kracher, A.O. Tsokol, and G.J. Miller, Chem. Mater. 18, 822 (2006).10.1021/cm0515505 ↗
5. D. Cadavid and J.E. Rodriguez, Physica B 403, 3976 (2008).10.1016/j.physb.2008.07.039 ↗
6. L.T. Zhang, M. Tsutsui, K. Ito, and M. Yamaguchi, Thin Solid Films 443, 84 (2003).10.1016/S0040-6090(03)00855-1 ↗
7. T. Itoh, J. Shan, and K. Kitagawa, J. Propul. Power 24, 353 (2008).10.2514/1.20944 ↗
8. I.H. Kim and S.C. Ur, Twenty-Second International Conference on Thermoelectrics, Proceedings ICT ‘03 (New York: IEEE, 2003), pp. 275–278.
9. M.A. Liu, X.Y. Qin, C.S. Liu, L. Pan, and H.X. Xin, Phys. Rev. B 81, 245215 (2010).10.1103/PhysRevB.81.245215 ↗
10. L. Pan, X.Y. Qin, M. Liu, and F. Liu, J. Alloy. Compd. 489, 228 (2010).10.1016/j.jallcom.2009.09.058 ↗
11. X.Y. Qin, M. Liu, L. Pan, H.X. Xin, J.H. Sun, and Q.Q. Wang, J. Appl. Phys. 109, 033714 (2011).10.1063/1.3544479 ↗
12. L. Pan, X.Y. Qin, H.X. Xin, D. Li, J.H. Sun, J. Zhang, C.J. Song, and R.R. Sun, Intermetallics 18, 1106 (2010).10.1016/j.intermet.2010.01.008 ↗
13. B.L. Pedersen, H. Yin, H. Birkedal, M. Nygren, and B.B. Iversen, Chem. Mater. 22, 2375 (2010).10.1021/cm903659g ↗
14. D. Li and X.Y. Qin, Intermetallics 19, 1651 (2011).10.1016/j.intermet.2011.07.002 ↗
15. J.L. Cui, X.L. Liu, W. Yang, D.Y. Chen, L.D. Mao, and X. Qian, Chin. J. Mech. Eng. 22, 270 (2009).10.3901/CJME.2009.02.270 ↗
16. T. Itoh, N. Asari, N. Kanetake, and A. Okada, Thermoelectric Power Generation, ed. T.P. Hogan, J. Yang, R. Funahashi, et al. (Warrendale: MRS, 2008), p. 265.
17. F. Liu, X.Y. Qin, and H.X. Xin, J. Phys. D-Appl. Phys. 40, 7811 (2007).10.1088/0022-3727/40/24/033 ↗
18. J. Nylen, S. Lidin, M. Andersson, H. Liu, N. Newman, and U. Haussermann, J. Solid State Chem. 180, 2603 (2007).10.1016/j.jssc.2007.07.013 ↗
19. A.P. Litvinchuk, J. Nylen, B. Lorenz, A.M. Guloy, and U. Haussermann, J. Appl. Phys. 103, 123524 (2008).10.1063/1.2946450 ↗
20. G. Nakamoto, T. Souma, M. Yamaba, and M. Kurisu, J. Alloy. Compd. 377, 59 (2004).10.1016/j.jallcom.2004.01.054 ↗
21. T. Caillat and J.P. Fleurial, The Proceedings of the 31st Intersociety Energy Conversion Engineering Conference (Washington, DC: IEEE, 1996), pp. 905–909.10.1109/IECEC.1996.553818 ↗
22. K.W. Jang, I.H. Kim, J.I. Lee, and G.S. Choi, Proceedings ICT 07: Twenty-Sixth International Conference on Thermoelectrics, ed. I. Kim (New York: IEEE, 2008), p. 215.
23. B.L. Pedersen, H. Birkedal, E. Nishibori, A. Bentien, M. Sakata, M. Nygren, P.T. Frederiksen, and B.B. Iversen, Chem. Mater. 19, 6304 (2007).10.1021/cm702247b ↗
24. L. Pan, X.Y. Qin, and M. Liu, Solid State Commun. 150, 346 (2010).10.1016/j.ssc.2009.11.031 ↗
25. B. Ma, S.D. Cheng, W.-Y. Zhao, and Q.-J. Zhang, J. Inorg. Mater. 25, 598 (2010).10.3724/SP.J.1077.2010.00598 ↗
26. F. Liu, X.Y. Qin, and D. Li, J. Phys. D-Appl. Phys. 40, 4974 (2007).10.1088/0022-3727/40/16/033 ↗
27. B.L. Pedersen, H. Birkedal, M. Nygren, P.T. Frederiksen, and B.B. Iversen, J. Appl. Phys. 105, 013517 (2009).10.1063/1.3037203 ↗
28. D. Li, H.H. Hng, J. Ma, and X.Y. Qin, J. Mater. Res. 24, 430 (2009).10.1557/JMR.2009.0058 ↗
29. L. Pan, X.Y. Qin, and M. Liu, Solid State Sci. 12, 257 (2010).10.1016/j.solidstatesciences.2009.11.003 ↗
30. L. Pan, X.Y. Qin, H.X. Xin, C.J. Song, Q.Q. Wang, J.H. Sun, and R.R. Sun, Solid State Sci. 12, 1511 (2010).10.1016/j.solidstatesciences.2010.06.005 ↗
31. T. Koyanagi, K. Hino, Y. Nagamoto, H. Yoshitake, and K. Kishimoto, Thermoelectrics, 16th International Conference on Thermoelectrics (Dresden, Germany: IEEE, 1997), pp. 463–466.
32. W. Li, L.M. Zhou, Y.L. Li, J. Jiang, and G.J. Xu, J. Alloy. Compd. 486, 335 (2009).10.1016/j.jallcom.2009.06.145 ↗
33. V.L. Kuznetsov and D.M. Rowe, J. Alloy. Compd. 372, 103 (2004).10.1016/j.jallcom.2003.10.001 ↗
34. M. Tsutsui, L.T. Zhang, K. Ito, and A. Yamaguchi, Intermetallics 12, 809 (2004).10.1016/j.intermet.2004.02.030 ↗
35. J.C. Slater, J. Chem. Phys. 41, 3199 (1964).10.1063/1.1725697 ↗
36. G.J. Snyder, M. Christensen, E. Nishibori, T. Caillat, and B.B. Iversen, Nat. Mater. 3, 458 (2004).10.1038/nmat1154 ↗
37. T. Caillat, J.-P. Fleurial, and A. Borshchevsky, Thermoelectrics, the 15th International Conference on Thermoelectrics (Pasadena: IEEE, 1996), pp. 151–154.
38. M. Cultler, J.F. Leavy, and R.L. Fitzpatrick, Phys. Rev. 133, A1143 (1964).10.1103/PhysRev.133.A1143 ↗