Burnout of the organic vehicle in an electrically conductive thick-film paste
Source abstract
Abstract
The burnout of the organic vehicle in a silver-particle, glass-free, electrically conductive, thick-film paste during firing in air was studied. For a vehicle consisting of ethyl cellulose dissolved in ether, burnout primarily involves the thermal decomposition of ethyl cellulose. The presence of ether with dissolved ethyl cellulose facilitates the burnout of ethyl cellulose. Excessive ethyl cellulose hinders the burnout. A high heating rate results in more residue after burnout. By interrupting the heating at 160°C for 15 min, the residue after subsequent burnout is diminished probably because of reduced temporal overlap of the processes of organic burnout and silver particle necking. By interrupting the heating at either 300°C or 385°C for 30 min, the temperature required for complete burnout is reduced. The addition of silver particles facilitates drying at room temperature and burnout upon heating.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrical and Thermal Properties of Materials · Injection Molding Process and Properties · Thermal properties of materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. L.A. Salam, R.D. Matthews, and H. Robertson, J. Eur. Ceram. Soc. 20, 1375 (2000).10.1016/S0955-2219(99)00236-8 ↗
2. A. Das, G. Madras, N. Dasgupta, and A.M. Umarji, J. Eur. Ceram. Soc. 23, 1013 (2003).10.1016/S0955-2219(02)00266-2 ↗
3. Z.-P. Xie, Y.-B. Cheng, and Y. Huang, Mater. Sci. Eng. A349, 20 (2003).10.1016/S0921-5093(02)00470-7 ↗
4. D.R. Hammond and S.H.W. Hankin, Thermochim. Acta 192, 65 (1991).10.1016/0040-6031(91)87148-P ↗
5. F. Dogan, J.-H. Feng, and L.G. Ferguson (U.S. patent 6,447,712, 10 September 2002).
6. P.S. Apte, E.S. Tachauer, and T.K. Solomon (World Intellectual Property Organisation patent WO9704958, 13 February 1997).
7. K.J. Voorhees, S.F. Baugh, and D.N. Stevenson, Thermochim. Acta 274, 187 (1996).10.1016/0040-6031(95)02583-9 ↗
8. C.M. Lobley and T.X. Guo, Mater. Sci. Technol. 14, 1024 (1998).10.1179/026708398790613399 ↗
9. R.M. German, Advances in Powder Metallurgy and Particulate Materials—1996 (Princeton, NJ: Metal Powder Industries Federation, 1996), p. 10.3.
10. H.H. Angermann and O. Van Der Biest, Mater. Manuf. Processing 10, 439 (1995).10.1080/10426919508935037 ↗
11. Z. Shi and Z.X. Guo, Acta Mater. 51, 899 (2003).10.1016/S1359-6454(02)00479-2 ↗
12. K.W. Kirby, A.T. Jankiewicz, R.F. Lowell, and R.L. Hallse (U.S. patent 6,083,452, 4 July 2000).
13. J.M. Vihtelic, P.D. Jackson, J.E. Kresta, and K.C. Frisch (European patent EP1023958, 2 August 2000).
14. T.A. Guiton and L.K. Mills (European patent EP0691944, 17 January 1996).
15. J. Wang, J. Am. Ceram. Soc. 75, 2627 (1992).10.1111/j.1151-2916.1992.tb05628.x ↗
16. Z. Shi, Z.X. Guo, and J.H. Song, Acta Mater. 50, 1937 (2002).10.1016/S1359-6454(02)00036-8 ↗
17. Z. Shi, Z.X. Guo, and J.H. Song, Mater. Sci. Technol. 16, 843 (2000).10.1179/026708300101508540 ↗
18. J. Fan, B. Huang, X. Qu, and Y. Li, Trans. Nonferrous Met. Soc. China 9, 93 (1999).
19. D. Rodrigues and A.P. Tschiptschin, Mater. Sci. Forum 299–300, 439 (1999).
20. M. Zhu and D.D.L. Chung, J. Electron. Mater. 23, 541 (1994).10.1007/BF02670657 ↗
21. Z. Liu and D.D.L. Chung, J. Electron. Packaging 123, 64 (2001).10.1115/1.1329131 ↗
22. Z. Liu and D.D.L. Chung, J. Electron. Mater. 30, 1458 (2001).10.1007/s11664-001-0202-0 ↗
23. L.A. Xue and J. Piascik (U.S. patent 6,306,208, 23 October 2001).
24. L.A. Xue and J. Piascik (U.S. patent 6,248,680, 19 June 2001).
25. J. Qiu, J. Tani, Y. Kobayashi, T.Y. Um, and H. Takahashi, Smart Mater. Struct. 12, 331 (2003).10.1088/0964-1726/12/3/303 ↗
26. S.A. Kanber, A.H. Ibraheim, and L.A. Jamil, Thermochim. Acta 177, 329 (1991).10.1016/0040-6031(91)80108-U ↗
27. A. Dwivedi and R.F. Speyer, Thermochim. Acta 247, 431 (1994).10.1016/0040-6031(94)80142-8 ↗
28. H. Hoppert, Thermochim. Acta 20, 81 (1977).10.1016/0040-6031(77)85042-9 ↗
29. P. Sung, K. Gary, D. Leon, and T. Song, Solid Freeform Fabrication Symp. Proc. (Austin, TX: University of Texas at Austin, 1998), p. 671–672.
30. A. Maximenko and O. Van Der Biest, J. Eur. Ceram. Soc. 18, 1001 (1998).10.1016/S0955-2219(97)00193-3 ↗
31. J. Jarrige, J.P. Lecompte, J. Mullot, and G. Muller, J. Eur. Ceram. Soc. 17, 1891 (1997).10.1016/S0955-2219(97)00078-2 ↗
32. M. Trunec and J. Cihlar, J. Eur. Ceram. Soc. 17, 203 (1997).10.1016/S0955-2219(96)00108-2 ↗
33. Y. Zeng, D. Jiang, and P. Greil, J. Eur. Ceram. Soc. 20, 1691 (2000).10.1016/S0955-2219(00)00043-1 ↗
34. L.A. Salam, R.D. Matthews, and H. Robertson, J. Eur. Ceram. Soc. 20, 335 (2000).10.1016/S0955-2219(99)00169-7 ↗
35. M. Trunec and J. Cihlar, J. Eur. Ceram. Soc. 22, 2231 (2002).10.1016/S0955-2219(02)00015-8 ↗
36. J.I. Eldridge, D.R. Wheeler, R.R. Bowman, and A. Korenyi-Both, J. Mater. Res. 12, 2191 (1997).10.1557/JMR.1997.0293 ↗
37. Z. Liu and D.D.L. Chung, J. Electron. Mater. 33, 194 (2004).10.1007/s11664-004-0179-6 ↗