journal article·2001-12

Nickel silicide formation on Si(100) and Poly-Si with a presilicide N2 + implantation

P. S. Lee, D. Mangelinck, K. L. Pey, J. Ding, D. Z. Chi, J. Y. Dai, A. See

Journal of Electronic Materials· Volume 30· Issue 12
Publisher page

Abstract

The key feature of this study is to incorporate N 2 + implant prior to Ni sputtering on the poly-Si gate and source/drain regions. The results show that the incorporation of the presilicide N 2 + implant is able to suppress agglomeration in the Ni silicide films up to 900°C and enhance the phase stability of NiSi on Si(100) up to 750°C. Stable and low sheet resistance was achieved on the silicided undoped poly-Si up to 700°C due to reduced layer inversion, which is driven by grain boundary energy and the surface energy of the poly-Si.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Anodic Oxide Films and Nanostructures · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. F.M. d'Heurle, J. Mater. Res. 3, 167 (1988).10.1557/JMR.1988.0167 ↗
2. S.R. Das, D.-X. Xu, M. Nourmia, L. Lebrun, and A. Naem, Mater. Res. Soc. Symp. Proc. 427, 541 (1996).10.1557/PROC-427-541 ↗
3. S. Nygren, D. Caffin, M. Ostling, and F.M. d'Heurle, Appl. Surf. Sci. 53, 87 (1991).10.1016/0169-4332(91)90247-H ↗
4. T. Ohguro, S. Nakamura, E. Morifuji, M. Ono, T. Yoshitomi, M. Saito, H.S. Momose, and H. Iwai, IEDM p. 453 (1995).
5. W.T. Sun, M.C. Liaw, K.C. Hsieh, and C.C.H. Hsu, IEEE Trans. Electron. Dev. 45, 1912 (1998).10.1109/16.711355 ↗
6. L.W. Cheng, S.L. Cheng, J.Y. Chen, L.J. Chen, B.Y. Tsui, Thim Solid Films 335–336, 214 (1999).
7. P.S. Lee, K.L. Pey, D. Mangelinck, J. Ding, and L. Chan, Electron. Dev. Lett. 21, 566 (2000).10.1109/55.887467 ↗
8. P.S. Lee, D. Mangelinck, K.L. Pey, Z.X. Shen, J. Ding, T. Osipowicz, and A. See, Electrochem. Solid State Lett. 3, 153 (2000).10.1149/1.1390986 ↗
9. D.M. Scott, L. Wielunski, H. von Seefeld, and M.-A. Nicolet, Nucl. Instrum. Meth. 182–183, 661 (1981).10.1016/0029-554X(81)90793-X ↗
10. L. Wielunski, D.M. Scott, M.-A. Nicolet, and H. von Seefeld, Appl. Phys. Lett. 38, 106 (1981).10.1063/1.92259 ↗
11. E.G. Colgan, J.P. Gambino, and Q.Z. Hong, Mater. Sci. Eng. R16, 43 (1996).10.1016/0927-796X(95)00186-7 ↗
12. S. Ogawa, T. Yoshida, T. Kouzaki, S. Okuda, and K. Tsukamota, Appl. Surf. Sci. 41–42, 290 (1989).
13. A. Nishiyama, Y. Akasaka, Y. Ushiku, and K. Hishioka, Jpn. J. Appl. Phys. 36, 3639 (1997).10.1143/JJAP.36.3639 ↗
14. C.V. Thompson, Ann. Rev. Mater. Sci. 20, 245 (1990).10.1146/annurev.ms.20.080190.001333 ↗
15. S.P. Murarka, J. Vac. Sci. Technol. B 2, 693 (1994).10.1116/1.582864 ↗
16. H.J. Steim, Mater. Res. Soc. Symp. Proc. 59, 523 (1986).