Effect of Cr2O3 Coating on LiNi1/3Co1/3Mn1/3O2 as Cathode for Lithium-Ion Batteries
Source abstract
Abstract
Cr2O3 was applied to modify the surface of LiNi1/3Co1/3Mn1/3O2 cathode material by a novel facile route. X-ray diffraction (XRD), scanning electron microscopy and x-ray photoelectron spectroscopy were used to characterize the structure, shape and composite of the obtained samples. Transmission electron microscope images clearly show that the uniform coating layer thicknesses are about 40 nm and 45 nm for 1 wt.% and 2 wt.% Cr2O3, respectively. At the high concentration (3 wt.%), the coating layer becomes heterogeneously distributed. After coating with 1 wt.%, 2 wt.%, and 3 wt.% Cr2O3, the initial specific discharge capacities decrease to 159.3 mAh g−1, 156.4 mAh g−1, and 152.7 mAh g−1 at 0.1 C, respectively. Despite an increasing charge transfer resistance for the Cr2O3 coating, a better rate capability and cycling ability have been obtained. High temperature-XRD (HT-XRD) data indicate that the thermal stability of the electrode material has also been obviously improved, which is especially helpful for LiNi1/3Co1/3Mn1/3O2 used as the cathode of lithium power batteries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. N. Yabuuchi, K. Yoshii, S.-T. Myung, I. Nakai, and S. Komaba, J. Am. Chem. Soc. 133, 4404 (2011).10.1021/ja108588y ↗
2. Y.-K. Sun, S.-T. Myung, B.-C. Park, J. Prakash, I. Belharouak, and K. Amine, Nat. Mater. 8, 320 (2009).10.1038/nmat2418 ↗
3. Y.-K. Sun, M.-J. Lee, C.S. Yoon, J. Hassoun, K. Amine, and B. Scrosati, Adv. Mater. 24, 1192 (2012).10.1002/adma.201104106 ↗
4. H. Liu and L. Tan, Solid State Ionics 181, 1530 (2010).10.1016/j.ssi.2010.08.016 ↗
5. C. Cheng, L. Tan, H. Liu, and X. Huang, Mater. Res. Bull. 46, 2032 (2011).10.1016/j.materresbull.2011.07.004 ↗
6. Z. Huang, J. Gao, X. He, J. Li, and C. Jiang, J. Power Sources 202, 284 (2012).10.1016/j.jpowsour.2011.10.143 ↗
7. L. Kyung, M. Lee, Y. Ri, K.I. Young, T.W. Kim, S.Y. Han, and S.-J. Hwang, J. Phys. Chem. C 116, 3311 (2012).10.1021/jp210063c ↗
8. S.-T. Myung, K. Izumi, and S. Komaba, J. Phys. Chem. C 111, 4061 (2007).10.1021/jp0674367 ↗
9. J.-H. Kim, M.-S. Park, J.-H. Song, D.-J. Byun, Y.-J. Kim, and J.-S. Kim, J. Alloys Compd. 517, 20 (2012).10.1016/j.jallcom.2011.11.117 ↗
10. Y. Cho and J. Cho, J. Electrochem. Soc. 157, A625 (2010).10.1149/1.3363852 ↗
11. Z. Zhang, Z. Gong, and Y. Yang, J. Phys. Chem. B 108, 17546 (2004).10.1021/jp046980h ↗
12. H. Şahan, H. Göktepe, Ş. Patat, and A. Ülgen, Solid State Ionics 181, 1437 (2010).10.1016/j.ssi.2010.08.008 ↗
13. X. Li, Y. Lin, Y. Lin, H. Lai, and Z. Huang, Rare Met. 31, 4 (2012).
14. S.T. Myung, K. Izumi, S. Komaba, Y.-K. Sun, H. Yashiro, and N. Kumagai, Chem. Mater. 17, 3695 (2005).10.1021/cm050566s ↗
15. Y. Huang, J. Chen, F. Cheng, W. Wan, W. Liu, H. Zhou, and X. Zhang, J. Power Sources 195, 8267 (2010).10.1016/j.jpowsour.2010.07.021 ↗
16. C.H. Lu and H.C. Wang, J. Eur. Ceram. Soc. 24, 717 (2004).10.1016/S0955-2219(03)00332-7 ↗
17. D.C. Li, Y. Kato, K. Kobayakawa, H. Noguchi, and Y. Sato, J. Power Sources 160, 1342 (2006).10.1016/j.jpowsour.2006.02.080 ↗
18. J.M. Zheng, J. Li, Z.R. Zhang, X.J. Guo, and Y. Yang, Solid State Ionics 179, 1794 (2008).10.1016/j.ssi.2008.01.091 ↗
19. S.-H. Lee, L.A. Riley, S.V. Atta, A.S. Cavanagh, Y. Yan, S.M. George, P. Liu, and A.C. Dillon, J. Power Sources 196, 3317 (2011).10.1016/j.jpowsour.2010.11.124 ↗
20. S.W. Lee, K.S. Kim, and H.S. Moon, J. Power Sources 126, 150 (2004).10.1016/j.jpowsour.2003.08.032 ↗
21. Y. Huang, J. Chen, J. Ni, H. Zhou, and X. Zhang, J. Power Sources 188, 538 (2009).10.1016/j.jpowsour.2008.12.037 ↗