Corrosion of RoHS-Compliant Surface Finishes in Corrosive Mixed Flowing Gas Environments
Source abstract
Abstract
Recently, the corrosion resistance of printed wiring board (PWB) finishes has generated considerable interest due to field failures observed in various parts of the world. This study investigates the corrosion issues associated with the different lead-free PWB surface finishes. Corrosion products on various PWB surface finishes generated in mixed flowing gas (MFG) environments were studied, and analysis techniques such as scanning electron microscopy, energy-dispersive x-ray, x-ray diffraction, focused ion beam, and scanning Auger microscopy were used to quantify the corrosion layer thickness and determine the composition of corrosion products. The corrosion on organic solderability preservative samples shows similar corrosion products to bare copper and is mainly due to direct attack of copper traces by corrosive gases. The corrosion on electroless nickel immersion gold occurs primarily through the porosity in the film and is accelerated by the galvanic potential between gold and copper; similar results were observed on immersion silver. Immersion tin shows excellent corrosion resistance due to its inherent corrosion resistance in the MFG environment as well as the opposite galvanic potential between tin and copper compared with gold or silver and copper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Electrical Contact Performance and Analysis · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. Directive 2002/96/EC, http://www.dti.gov.uk . Accessed 2 October 2011.
2. IPC-4553, Specification for Immersion Silver Plating for Printed Circuit Boards, September 29 (2005).
3. IPC-4552, Specification for Electroless Nickel/Immersion Gold (ENIG) Plating for Printed Circuit Boards, October (2002).
4. IPC-TR-585, Time, Temperature and Humidity Stress of Final Board Finish Solderability, May (2006).
5. R. Veale, Proceedings SMTAI, Illinois, USA (2005).
6. P. Mazurkiewicz, Proceedings of the 32nd International Symposium for Testing and Failure Analysis, Texas, USA (2006).
7. C. Xu, D. Flemming, K. Demerkin, G. Derkits, J. Franey, and W. Reents, Corrosion Resistance of PWB Surface Finishes (Murray Hill: Alcatel-Lucent, APEX, 2007).
8. R. Schueller, Creep Corrosion on Lead-Free Printed Circuit Boards in High Sulphur Environments (Orlando, USA: SMTAI, 2007).
9. M. Watanabe, H. Hirota, T. Handa, N. Kuwaki, and J. Sakai, Proceedings of the 17th International Corrosion Congress: Corrosion Control in the Service of Society, Las Vegas, Nevada, USA (2008).
10. P. Zhao and M. Pecht, IEEE Trans. Dev. Mater. 5, 268 (2005).10.1109/TDMR.2005.846981 ↗
11. P. Zhao and M. Pecht, Microelectron. Reliab. 43, 775 (2003).10.1016/S0026-2714(03)00064-7 ↗
12. L.F. Garfias-Mesias, J.P. Franey, R.P. Frankenthal, and W.D. Reents, Gordon Research Conference on Corrosion, New Hampshire, USA (2004).
13. L.F. Garfias-Mesias, J.P. Franey, R.P. Frankenthal, R. Coyle, and W.D. Reents, Corrosion 2005, Research in Progress (Houston, TX, USA: NACE, 2005).
14. M. Watanabe, A. Hokazono, T. Handa, T. Ichino, and N. Kuwaki, Corros. Sci. 48, 3759 (2006).10.1016/j.corsci.2005.12.009 ↗
15. M. Watanabe, S. Shinozaki, E. Toyoda, K. Asakura, T. Ichino, N. Kuwaki, Y. Higashi, and T. Tanaka, Corrosion 62, 243 (2006).10.5006/1.3278270 ↗
16. W. Abbott, IEEE Trans. Compon. Hybrids Manuf. Technol. 11, 22 (1998).
17. M. Reid, J. Punch, L.F. Garfias, K. Shannon, S. Belochapkine, and D.A. Tanner, J. Electrochem. Soc. 155, C147 (2008).10.1149/1.2837834 ↗
18. D. Williams, IEEE Trans. Compon. Hybrids Manuf. Technol. 11, 36 (1988).10.1109/33.2960 ↗
19. K. Demirkan, G.E. Derkits, D.A. Fleming, J.P. Franey, K. Hannigan, R.L. Opila, J. Punch, W.D. Reents, M. Reid, B. Wright, and C. Xu, J. Electrochem. Soc. 157, C30 (2010).10.1149/1.3258288 ↗
20. M. Reid, J. Punch, G. Grace, L.F. Garfias, and S. Belochapkine, J. Electrochem. Soc. 153, B513 (2006).10.1149/1.2352042 ↗
21. R.M. Allen and J.B. VanderSande, Scripta Metall. 16, 1161 (2004).10.1016/0036-9748(82)90088-6 ↗
22. J.W. Dini, Electrodeposition (Norwich: William Andrew, 1993), pp. 56–65.
23. K.M. Drummond, F. Grieser, T.W. Healy, E.J. Silvester, and M. Giersig, Langmuir 15, 6637 (1999).10.1021/la9816205 ↗
24. T.E. Graedel, J.P. Franey, G.J. Gualtieri, G.W. Kammlott, and D.L. Malm, Corros. Sci. 25, 1163 (1985).10.1016/0010-938X(85)90060-5 ↗
25. T.E. Graedel, K. Nassau, and J.P. Franey, Corros. Sci. 27, 639 (1987).10.1016/0010-938X(87)90047-3 ↗
26. Chen, A., Chem. Commun. 1964 (2004).10.1039/b407313d ↗
27. E. Sandnes, M.E. Williams, M.D. Vaudin, and G.R. Stafford, J. Electron. Mater. 37, 490 (2007).10.1007/s11664-007-0369-0 ↗
28. A. Dimitrovska and R. Kovacevic, J. Electron. Mater. 31, 1 (2009).
29. R.S. Mroczkowski, Proceedings of the 44th IEEE Holm Conference on Electrical Contacts (1998), p. 57.
30. R. Martens and M.G. Pecht, IEEE Trans. Adv. Packag. 23, 561 (2000).10.1109/6040.861574 ↗
31. C. Maul, J.W. McBride, and J. Swingler, IEEE Trans. Compon. Packag. Technol. 24, 370 (2001).10.1109/6144.946482 ↗
32. S.J. Krumbein, IEEE Trans. Parts Mater. Packag. 5, 89–98 (1969).10.1109/TPMP.1969.1136066 ↗
33. D. Simon, J. Bardolle, and M. Bujor, IEEE Trans. Compon. Hybrids Manuf. Technol. 3, 13 (1980).10.1109/TCHMT.1980.1135595 ↗
34. P. Meeh, Circuit World 31, 28 (2004).10.1108/03056120510553202 ↗